Personal information

Steels, Intermetallic alloys, Composites, Biomaterials, Powder Metallurgy, Materials Characterization, X Ray Diffraction, Texture, Residual Stress Measurement, Thermomechanical Processing, Mechanical Properties
Spain

Activities

Employment (4)

Centro Nacional de Investigaciones Metalurgicas: Madrid, Madrid, ES

2008-07-01 to present | CSIC Research Scientist (Physical Metallurgy)
Employment
Source: Self-asserted source
José A. Jiménez

Centro Nacional de Investigaciones Metalurgicas: Madrid, Madrid, ES

1997-02-01 to 2008-06-30 | CSIC Tenured Scientist (Physical Metallurgy)
Employment
Source: Self-asserted source
José A. Jiménez

Max-Planck-Institut für Eisenforschung GmbH: Düsseldorf, Nordrhein-Westfalen, DE

1993-01 to 1996-12 | Postdoctoral Fellow (Werkstoffkunde)
Employment
Source: Self-asserted source
José A. Jiménez

Centro Nacional de Investigaciones Metalurgicas: Madrid, Madrid, ES

1988-01 to 1991-12 | Doctoral Student (Physical Metallurgy)
Employment
Source: Self-asserted source
José A. Jiménez

Education and qualifications (2)

Universidad Complutense de Madrid: Madrid, Comunidad de Madrid, ES

1988 to 1991 | PhD in Physics
Education
Source: Self-asserted source
José A. Jiménez

Universidad de Sevilla: Seville, Andalucía, ES

1982 to 1987 | BSc Degree in Physics
Education
Source: Self-asserted source
José A. Jiménez

Works (50 of 219)

Items per page:
Page 1 of 5

Design of carbide free bainitic steels for hot rolling practices

Philosophical Magazine Letters
2024-12-31 | Journal article
Contributors: Radhakanta Rana; Erick Cordova-Tapia; Jose A. Jimenez; Lucia Morales-Rivas; Carlos Garcia-Mateo
Source: check_circle
Crossref

Study of bainite and martensite tempering in a medium C high Si steel. microstructural disparities and equilibrium convergence

Journal of Materials Research and Technology
2024-09 | Journal article
Contributors: Mattia Franceschi; Lucia Morales-Rivas; Erick Cordova-Tapia; Jose A. Jimenez; Manuele Dabalà; Carlos Garcia-Mateo
Source: check_circle
Crossref

Solute and phase heterogeneous distribution at different scales and its effect on ageing physical phenomena in a laser powder bed fusion produced maraging steel

Additive Manufacturing
2024-08 | Journal article
Contributors: Ana Santana; Adriana Eres-Castellanos; Jonathan D. Poplawsky; David San-Martin; Jose Antonio Jimenez; Esteban Urones-Garrote; Amy J. Clarke; Carlos Capdevila; Francisca G. Caballero
Source: check_circle
Crossref

Effect of prior martensite on bainitic transformation of high Si hypereutectoid steel

Journal of Materials Research and Technology
2024-05 | Journal article
Contributors: Carlos Garcia-Mateo; Thomas Sourmail; Amandine Philippot; Lucia Morales-Rivas; Jose A. Jimenez
Source: check_circle
Crossref

Development of advanced cementite-free bainitic steel using Ni, Al and Cu additions – Design concept and phase transformations study

Journal of Materials Research and Technology
2023-11 | Journal article
Contributors: Aleksandra Królicka; Francisca Garcia Caballero; José Antonio Jimenez; Władysław Zalecki; Roman Kuziak
Source: check_circle
Crossref

Effect of layer thickness and laser emission mode on the microstructure of an additive manufactured maraging steel

Journal of Materials Research and Technology
2023-07 | Journal article
Contributors: Ana Santana; Adriana Eres-Castellanos; Jose Antonio Jimenez; Rosalía Rementeria; Carlos Capdevila; Francisca G. Caballero
Source: check_circle
Crossref

Time-Dependent Evolution of Volume Fraction and Stability of Retained Austenite in a Hot-Rolled and Intercritically Annealed Al-Alloyed Medium-Mn Steel

Metallurgical and Materials Transactions A
2023-04 | Journal article
Contributors: Adam Skowronek; Adam Grajcar; Carlos Garcia-Mateo; José A. Jiménez; Roumen H. Petrov
Source: check_circle
Crossref

Evaluation of Structural and Functional Properties of La0.6Sr0.4MnO3 Perovskite Prepared by the Fast Solution Combustion Approach

Catalysts
2022-12-13 | Journal article
Contributors: Ramón Cobo Rendón; Christopher Salvo; Erwin Sepúlveda; Arunachalam Arulraj; Felipe Sanhueza; José Jiménez Rodríguez; Ramalinga Viswanathan Mangalaraja
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

High temperature performance of 316L steel reinforced by particle inoculation and processed by laser powder bed fusion

Journal of Materials Research and Technology
2022-11 | Journal article
Contributors: Adriana Eres-Castellanos; Ana Santana; Luis Miguel Sanz-Moral; Rosalia Rementeria; Rebeca Hernández Pascual; Marta Serrano; Isaac Toda-Caraballo; Jose A. Jimenez; Francisca G. Caballero; Carlos Capdevila
Source: check_circle
Crossref

Study of the isothermal bainitic transformation and austenite stability in an advanced Al-rich medium-Mn steel

Archives of Civil and Mechanical Engineering
2022-11 | Journal article
Part of ISSN: 1644-9665
Source: Self-asserted source
José A. Jiménez

Effect of Processing Route on the Microstructure and Tensile Properties of an Al and Si-Bearing Medium-Mn TRIP Steel Microalloyed with V

Metallurgical and Materials Transactions A
2022-10 | Journal article
Part of ISSN: 1073-5623
Part of ISSN: 1543-1940
Contributors: José A. Jiménez
Source: Self-asserted source
José A. Jiménez

Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys

Journal of Thermal Analysis and Calorimetry
2022-10-06 | Journal article
Part of ISSN: 1388-6150
Part of ISSN: 1588-2926
Contributors: José A. Jiménez
Source: Self-asserted source
José A. Jiménez
grade
Preferred source (of 2)‎

Bainite plate thickness reduction and microstructure tailoring by double austempering of Al-rich 3Mn steel

Materials Science and Engineering: A
2022-09 | Journal article
Part of ISSN: 0921-5093
Contributors: José A. Jiménez
Source: Self-asserted source
José A. Jiménez

Effect of processing parameters on texture and variant selection of as-built 300 maraging steel processed by laser powder bed fusion

Scientific Reports
2022-09-28 | Journal article
Part of ISSN: 2045-2322
Contributors: José A. Jiménez
Source: Self-asserted source
José A. Jiménez

Preparation of LSGM electrolyte via fast combustion method and analysis of electrical properties for ReSOC.

Journal of Electroceramics
2022-09-22 | Journal article
Part of ISSN: 1385-3449
Part of ISSN: 1573-8663
Contributors: José A. Jiménez
Source: Self-asserted source
José A. Jiménez

Evaluation of La0.8 Sr0·2MnO3 perovskite prepared by fast solution combustion

Ceramics International
2022-08 | Journal article
Part of ISSN: 0272-8842
Contributors: José A. Jiménez
Source: Self-asserted source
José A. Jiménez

Ferrimagnetic Clusters as the Origin of Anomalous Curie–Weiss Behavior in ZnFe2O4 Antiferromagnetic Susceptibility

Materials
2022-07-08 | Journal article
Contributors: Antonio Hernando; Miguel Ángel Cobos; José Antonio Jiménez; Irene Llorente; Asunción García-Escorial; Patricia de la Presa
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Evolution and Evaluation of Aesthetic Properties in Weathering Steel Accelerated Patinas: The Role of Lepidocrocite

Metals
2022-06-07 | Journal article
Part of ISSN: 2075-4701
Source: Self-asserted source
José A. Jiménez

Coexistence of antiferro- and ferrimagnetism in the spinel ZnFe2O4 with an inversion degree δ lower than 0.3

Ceramics International
2022-05 | Journal article
Contributors: Miguel Ángel Cobos; Patricia de la Presa; Inés Puente-Orench; Irene Llorente; Irene Morales; Asunción García-Escorial; Antonio Hernando; José Antonio Jiménez
Source: check_circle
Crossref

Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel

Journal of Materials Research and Technology
2022-05 | Journal article
Contributors: Adriana Eres-Castellanos; Muftah Zorgani; Davood Shahriari; Radu Romanica; Jose Antonio Jimenez; Carlos Garcia-Mateo; Mohammad Jahazi
Source: check_circle
Crossref

The Influence of Temperature on the Strain-hardening Behavior of Fe-22/25/28Mn-3Al-3Si TRIP/TWIP Steels

Materialia
2022-04 | Journal article
Part of ISSN: 2589-1529
Source: Self-asserted source
José A. Jiménez

Unveiling the Hidden Entropy in ZnFe2O4

Materials
2022-02-04 | Journal article
Part of ISSN: 1996-1944
Source: Self-asserted source
José A. Jiménez

Synthesis and Characterization of a Nearly Single Bulk Ti2AlN MAX Phase Obtained from Ti/AlN Powder Mixture through Spark Plasma Sintering

Materials
2021-04-26 | Journal article
Part of ISSN: 1996-1944
Source: Self-asserted source
José A. Jiménez

Effect of acid mine drainage (AMD) on the alteration of hydrated Portland cement and calcareous sandstone

Applied Geochemistry
2021-03 | Journal article
Part of ISSN: 0883-2927
Source: Self-asserted source
José A. Jiménez

Evaluation of bias voltage-dependent mechanical properties of amorphous TiSi2 thin films on PEEK by nano-characterization techniques

Surface and Coatings Technology
2021-03 | Journal article
Part of ISSN: 0257-8972
Source: Self-asserted source
José A. Jiménez

Thermally Reduced Soft Magnetic CuFe Nanoparticles for High-Performance Electrical Devices

IEEE Transactions on Magnetics
2021-02 | Journal article
Contributors: T. Prabhakaran; R. V. Mangalaraja; F. Beron; J. A. Jimenez; Juliano C. Denardin; T. Arun; Ali Akbari-Fakhrabadi
Source: check_circle
Crossref

Effect of substrate bias voltage on the mechanical properties and deformation mechanisms in the nanostructured Ti-22Nb-10Zr coating

Surface and Coatings Technology
2021-01 | Journal article
Part of ISSN: 0257-8972
Source: Self-asserted source
José A. Jiménez

Effect of Microsegregation and Bainitic Reaction Temperature on the Microstructure and Mechanical Properties of a High-Carbon and High-Silicon Cast Steel

Metals
2021-01-27 | Journal article
Part of ISSN: 2075-4701
Source: Self-asserted source
José A. Jiménez

Corrosion behaviour of resistance-spot-welded high-Mn austenitic TWIP steel

Corrosion Engineering, Science and Technology
2021-01-02 | Journal article
Part of ISSN: 1478-422X
Part of ISSN: 1743-2782
Source: Self-asserted source
José A. Jiménez

Examining the multi-scale complexity and the crystallographic hierarchy of isothermally treated bainitic and martensitic structures

Materials Characterization
2020 | Journal article
EID:

2-s2.0-85077736730

Part of ISBN:

10445803

Contributors: De-Castro, D.; Rementeria, R.; Vivas, J.; Sourmail, T.; Poplawsky, J.D.; Urones-Garrote, E.; Jimenez, J.A.; Capdevila, C.; Caballero, F.G.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Influence of chromium on the passivity of thermo-mechanically processed high-Mn TWIP steels

Applied Surface Science
2020 | Journal article
EID:

2-s2.0-85079848056

Part of ISBN:

01694332

Contributors: Fajardo, S.; Llorente, I.; Jiménez, J.A.; Calderón, N.; Herrán-Medina, D.; Bastidas, J.M.; Ress, J.; Bastidas, D.M.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Mechanical properties enhancement of a novel medium Mn-TRIP/TWIP assisted steel by dispersion of M<inf>2</inf>B-type borides particles

Materials Science and Engineering A
2020 | Journal article
EID:

2-s2.0-85082875443

Part of ISBN:

09215093

Contributors: Ma, L.; Jia, T.; Li, G.; Hu, J.; Jimenez, J.A.; Gao, X.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Single‐phase and binary phase nanogranular ferrites for magnetic hyperthermia application

Journal of the American Ceramic Society
2020-09 | Journal article
Contributors: Prabhakaran Thandapani; Mangalaraja Ramalinga Viswanathan; Marcus Vinícius‐Araújo; Andris F. Bakuzis; Fanny Béron; Arun Thirumurugan; Juliano C. Denardin; Jose A. Jiménez; Ali Akbari‐Fakhrabadi
Source: check_circle
Crossref

Atmospheric corrosion of zinc in coastal atmospheres

Materials and Corrosion
2019 | Journal article
EID:

2-s2.0-85060991021

Contributors: Fuentes, M.; de la Fuente, D.; Chico, B.; Llorente, I.; Jiménez, J.A.; Morcillo, M.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Effect of Mn additions on the corrosion behaviour of TWIP Fe-Mn-Al-Si austenitic steel in chloride solution

Corrosion Science
2019 | Journal article
EID:

2-s2.0-85064598155

Contributors: Fajardo, S.; Llorente, I.; Jiménez, J.A.; Bastidas, J.M.; Bastidas, D.M.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Magnetic Phase Diagram of Nanostructured Zinc Ferrite as a Function of Inversion Degree Î

Journal of Physical Chemistry C
2019 | Journal article
EID:

2-s2.0-85070411634

Part of ISBN:

19327455 19327447

Contributors: Cobos, M.A.; De La Presa, P.; Llorente, I.; Alonso, J.M.; Garciá-Escorial, A.; Marín, P.; Hernando, A.; Jiménez, J.A.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Microstructural Analysis of X38CrMov5-1 Steel Parts Manufactured by Casting and Evaluation of Possible Cleavage Failure

International Journal of Metalcasting
2019 | Journal article
EID:

2-s2.0-85069902614

Part of ISBN:

19395981

Contributors: Pastor, A.; Valles, P.; Jiménez, J.A.; Medina, S.F.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Pearlite Transformation in a Deformed TRIP/TWIP Austenitic Steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2019 | Journal article
EID:

2-s2.0-85055964920

Contributors: De Castro, D.; Vivas, J.; Rementeria, R.; Aranda, M.M.; Jimenez, J.A.; Capdevila, C.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

The influence of mechanical activation process on the microstructure and mechanical properties of bulk Ti<inf>2</inf>AlN MAX phase obtained by reactive hot pressing

Ceramics International
2019 | Journal article
EID:

2-s2.0-85066495541

Part of ISBN:

02728842

Contributors: Salvo, C.; Chicardi, E.; García-Garrido, C.; Jiménez, J.A.; Aguilar, C.; Usuba, J.; Mangalaraja, R.V.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Understanding water-splitting thermochemical cycles based on nickel and cobalt ferrites for hydrogen production

International Journal of Hydrogen Energy
2019 | Journal article
EID:

2-s2.0-85066312180

Part of ISBN:

03603199

Contributors: Goikoetxea, N.B.; Gómez-Mancebo, M.B.; Fernández-Saavedra, R.; Borlaf, F.; García-Pérez, F.; Jiménez, J.A.; Llorente, I.; Rucandio, I.; Quejido, A.J.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Corrosión del aluminio 1050 en atmósferas costeras

Revista de Metalurgia
2019-12-30 | Journal article
Contributors: Iván Díaz; María Fuentes; Daniel De la Fuente; Belén Chico; José A. Jiménez; Manuel Morcillo
Source: check_circle
Crossref

Corrosion of copper in unpolluted chloride-rich atmospheres

Metals
2018 | Journal article
EID:

2-s2.0-85055793860

Contributors: Lopesino, P.; Alcántara, J.; de la Fuente, D.; Chico, B.; Jiménez, J.A.; Morcillo, M.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Development of new β/α″-Ti-Nb-Zr biocompatible coating with low Young's modulus and high toughness for medical applications

Materials and Design
2018 | Journal article
EID:

2-s2.0-85040327861

Contributors: Frutos, E.; Karlík, M.; Jiménez, J.A.; Langhansová, H.; Lieskovská, J.; Polcar, T.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Five-year atmospheric corrosion of Cu, Cr and Ni weathering steels in a wide range of environments

Corrosion Science
2018 | Journal article
EID:

2-s2.0-85049923382

Contributors: Díaz, I.; Cano, H.; Lopesino, P.; de la Fuente, D.; Chico, B.; Jiménez, J.A.; Medina, S.F.; Morcillo, M.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Low-Temperature Bainite: A Thermal Stability Study

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018 | Journal article
EID:

2-s2.0-85044977671

Contributors: Santajuana, M.A.; Rementeria, R.; Kuntz, M.; Jimenez, J.A.; Caballero, F.G.; Garcia-Mateo, C.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Rapid fabrication and characterization of AISI 304 stainless steels modified with Cu additions by additive alloy melting (ADAM)

Journal of Materials Research and Technology
2018 | Journal article
EID:

2-s2.0-85041578479

Contributors: Cristobal, M.; San-Martin, D.; Capdevila, C.; Jiménez, J.A.; Milenkovic, S.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Analysis of historic copper patinas 2: Characterization of 400 year old patina from Royal Summer Palace in Prague

EUROCORR 2017 - The Annual Congress of the European Federation of Corrosion, 20th International Corrosion Congress and Process Safety Congress 2017
2017 | Conference paper
EID:

2-s2.0-85052322168

Contributors: Chico, B.; Fuente, D.D.L.; Jiménez, J.A.; Chang, T.; Odnevall Wallinder, I.; Leygraf, C.; Morcillo, M.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Carbon concentration measurements by atom probe tomography in the ferritic phase of high-silicon steels

Acta Materialia
2017 | Journal article
EID:

2-s2.0-85006340153

Contributors: Rementeria, R.; Poplawsky, J.D.; Aranda, M.M.; Guo, W.; Jimenez, J.A.; Garcia-Mateo, C.; Caballero, F.G.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Characterisation of a centuries-old patinated copper roof tile from Queen Anne's Summer Palace in Prague

Materials Characterization
2017 | Journal article
EID:

2-s2.0-85030706571

Contributors: Morcillo, M.; Chang, T.; Chico, B.; de la Fuente, D.; Odnevall Wallinder, I.; Jiménez, J.A.; Leygraf, C.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier

Development of a 2.25%Cr steel P23 reinforced with micro/nano-carbide particles produced by self-propagating high-temperature synthesis

Materials Science Forum
2017 | Book
EID:

2-s2.0-85000762827

Contributors: Carsí, M.; Jimenez, J.A.; Gomez-Mitxelena, X.; Ruano, O.A.
Source: Self-asserted source
José A. Jiménez via Scopus - Elsevier
Items per page:
Page 1 of 5