Personal information

Activities

Collapse all

Employment (3)

KTH Royal Institute of Technology: Stockholm, Stockholm, SE

Employment
Source: check_circle
KTH Royal Institute of Technology

Tohoku University: Sendai, JP

2022-06-03 to present | Professor(JSPS Fellowship)
Employment
Source: Self-asserted source
ziyong hou

Chongqing University: Chongqing, CN

2021-07-01 to present | Professor(Accociate) (Materials Science and Enginnering)
Employment
Source: Self-asserted source
ziyong hou

Education and qualifications (2)

Northeastern University : Shenyang, Liaoning, CN

2010-07-01 to 2014-12-01 | Doctor
Education
Source: Self-asserted source
ziyong hou

Kungliga Tekniska Högskolan: Stockholm, SE

2013-03-11 to 2014-06-05 | Doctor(Joint PhD) (Material science and engineering)
Education
Source: Self-asserted source
ziyong hou

Works (32)

Effect of initial microstructure on microstructure evolution and mechanical properties of 0.12C martensitic steels during quenching and tempering

Journal of Iron and Steel Research International
2025-01 | Journal article
DOI: 10.1007/s42243-024-01226-1
Contributors: Ya-ru Wang; Zi-yong Hou; He Yang; Jun Zhao; Zhi-yuan Chang; Fan-mao Meng; Ling Zhang; Gui-lin Wu; Xiao-xu Huang
Source: check_circle
Crossref

Atomic-scale understanding of twin intersection rotation and ε-martensite transformation in a high Mn twinning-induced plasticity steel

Acta Materialia
2024-06 | Journal article
DOI: 10.1016/j.actamat.2024.119832
Contributors: Jun Chen; Song Lu; Zi-yong Hou; Wen-wen Song; Zhen-yu Liu; Guo-dong Wang; Tadashi Furuhara
Source: check_circle
Crossref

Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design

Science
2024-02-09 | Journal article
DOI: 10.1126/science.adj0141
Contributors: Jingqi Zhang; Michael J. Bermingham; Joseph Otte; Yingang Liu; Ziyong Hou; Nan Yang; Yu Yin; Mohamad Bayat; Weikang Lin; Xiaoxu Huang et al.
Source: check_circle
Crossref

The effect of grain size and rolling reduction on microstructure evolution and annealing hardening response of a Mg-3Gd alloy

Journal of Magnesium and Alloys
2023-10 | Journal article
DOI: 10.1016/j.jma.2023.09.025
Contributors: F. Han; X. Luo; Q. Liu; Z. Hou; K. Marthinsen; G.L. Wu; C. Hatzoglou; P. Kontis; X. Huang
Source: check_circle
Crossref

Designing against phase and property heterogeneities in additively manufactured titanium alloys

Nature Communications
2022-08-09 | Journal article
DOI: 10.1038/s41467-022-32446-2
Contributors: Jingqi Zhang; Yingang Liu; Gang Sha; Shenbao Jin; Ziyong Hou; Mohamad Bayat; Nan Yang; Qiyang Tan; Yu Yin; Shiyang Liu et al.
Source: check_circle
Crossref

On the role of transmission electron microscopy for precipitation analysis in metallic materials

Critical Reviews in Solid State and Materials Sciences
2022-05-04 | Journal article
DOI: 10.1080/10408436.2021.1941751
Contributors: Tao Zhou; Revathy Prasath Babu; Ziyong Hou; Peter Hedström
Source: check_circle
Crossref

Effects of Austenitizing Temperature on Tensile and Impact Properties of a Martensitic Stainless Steel Containing Metastable Retained Austenite

Materials
2021-02-20 | Journal article
DOI: 10.3390/ma14041000
Contributors: Biao Deng; Dapeng Yang; Guodong Wang; Ziyong Hou; Hongliang Yi
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

On coarsening of cementite during tempering of martensitic steels

Materials Science and Technology
2020-05 | Journal article
DOI: 10.1080/02670836.2020.1740380
Contributors: Ziyong Hou; R. Prasath Babu; Peter Hedström; Joakim Odqvist
Source: check_circle
Crossref

Precipitation of multiple carbides in martensitic CrMoV steels - experimental analysis and exploration of alloying strategy through thermodynamic calculations

Materialia
2020-03 | Journal article
DOI: 10.1016/j.mtla.2020.100630
Contributors: Tao Zhou; R. Prasath Babu; Ziyong Hou; Joakim Odqvist; Peter Hedström
Source: check_circle
Crossref

An experimental and theoretical study of duplex fcc+hcp cobalt based entropic alloys

Acta Materialia
2019-09 | Journal article
DOI: 10.1016/j.actamat.2019.06.041
Contributors: Wei Wang; Ziyong Hou; Raquel Lizárraga; Ye Tian; R. Prasath Babu; Erik Holmström; Huahai Mao; Henrik Larsson
Source: check_circle
Crossref

Evaluating magnetic properties of composites from model alloys – Application to alternative binder cemented carbides

Scripta Materialia
2019-07 | Journal article
DOI: 10.1016/j.scriptamat.2019.04.033
Part of ISSN: 1359-6462
Source: Self-asserted source
ziyong hou

Early stages of cementite precipitation during tempering of 1C–1Cr martensitic steel

Journal of Materials Science
2019-06-19 | Journal article
DOI: 10.1007/s10853-019-03530-8
Contributors: Ziyong Hou; R. Prasath Babu; Peter Hedström; Joakim Odqvist
Source: check_circle
Crossref

Quantum mechanics basis of quality control in hard metals

Acta Materialia
2019-05 | Journal article
DOI: 10.1016/j.actamat.2019.02.036
Contributors: Ruiwen Xie; Raquel Lizárraga; David Linder; Ziyong Hou; Valter Ström; Martina Lattemann; Erik Holmström; Wei Li; Levente Vitos
Source: check_circle
Crossref

A comparative study of microstructure and magnetic properties of a Ni Fe cemented carbide: Influence of carbon content

International Journal of Refractory Metals and Hard Materials
2019-04 | Journal article
DOI: 10.1016/j.ijrmhm.2019.01.014
Contributors: David Linder; Ziyong Hou; Ruiwen Xie; Peter Hedström; Valter Ström; Erik Holmström; Annika Borgenstam
Source: check_circle
Crossref

Effect of carbon content on the Curie temperature of WC-NiFe cemented carbides

International Journal of Refractory Metals and Hard Materials
2019-01 | Journal article
DOI: 10.1016/j.ijrmhm.2018.08.010
Contributors: Ziyong Hou; David Linder; Peter Hedström; Annika Borgenstam; Erik Holmström; Valter Ström
Source: check_circle
Crossref

Microstructure evolution during tempering of martensitic Fe–C–Cr alloys at 700 °C

Journal of Materials Science
2018 | Journal article
DOI: 10.1007/s10853-018-2036-7
EID:

2-s2.0-85040953153
Contributors: Hou, Z.; Babu, R.P.; Hedström, P.; Odqvist, J.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier
grade
Preferred source (of 2)‎

Enhanced Grain Growth Behavior of Ferritic Steel during Continuous Cyclic Annealing

steel research international
2018-11 | Journal article
DOI: 10.1002/srin.201800222
Contributors: Ziyong Hou; R. Prasath Babu; Yunbo Xu; Di Wu
Source: check_circle
Crossref

Effect of Holding Temperature on Microstructure and Mechanical Properties of High-Strength Multiphase Steel

Steel Research International
2016 | Journal article
DOI: 10.1002/srin.201500331
EID:

2-s2.0-84985029761
Contributors: Hou, Z.Y.; Wu, D.; Zheng, S.X.; Yang, X.L.; Li, Z.; Xu, Y.B.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Quantitative modeling and experimental verification of carbide precipitation in a martensitic Fe-0.16 wt%C-4.0 wt%Cr alloy

Calphad: Computer Coupling of Phase Diagrams and Thermochemistry
2016 | Journal article
DOI: 10.1016/j.calphad.2016.03.001
EID:

2-s2.0-84960155147
Contributors: Hou, Z.; Hedström, P.; Chen, Q.; Xu, Y.; Wu, D.; Odqvist, J.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Study of carbide precipitation during tempering of martensite in an Fe-Cr-C alloy

PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015
2015 | Conference paper
EID:

2-s2.0-84962672588
Contributors: Hou, Z.; Hedström, P.; Wu, D.; Odqvist, J.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Low density steel 1.2C-1.5Cr-5Al designed for bearings

Materials Science and Technology (United Kingdom)
2014 | Journal article
DOI: 10.1179/1743284714Y.0000000513
EID:

2-s2.0-84901762694
Contributors: Yi, H.L.; Cai, H.L.; Hou, Z.Y.; Pang, J.C.; Wu, D.; Wang, G.D.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Microstructure of martensite in Fe-C-Cr and its implications for modelling of carbide precipitation during tempering

ISIJ International
2014 | Journal article
DOI: 10.2355/isijinternational.54.2649
EID:

2-s2.0-84917739189
Contributors: Hou, Z.; Hedström, P.; Xu, Y.; Wu, D.; Odqvist, J.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

A novel design: Partitioning achieved by quenching and tempering (Q-T & P) in an aluminium-added low-density steel

Scripta Materialia
2013 | Journal article
DOI: 10.1016/j.scriptamat.2012.10.018
EID:

2-s2.0-84872168081
Contributors: Yi, H.L.; Chen, P.; Hou, Z.Y.; Hong, N.; Cai, H.L.; Xu, Y.B.; Wu, D.; Wang, G.D.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Effect of coil temperature on microstructure and texture evolution of an high strength Nb-IF steel sheet

Materials Science Forum
2013 | Book
DOI: 10.4028/www.scientific.net/MSF.749.35
EID:

2-s2.0-84875747246
Contributors: Hou, Z.; Xu, Y.; Yi, H.; Wu, D.; Wang, G.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Acceleration of spheroidization in eutectoid steels by the addition of aluminum

Scripta Materialia
2012 | Journal article
DOI: 10.1016/j.scriptamat.2012.07.020
EID:

2-s2.0-84865506337
Contributors: Yi, H.L.; Hou, Z.Y.; Xu, Y.B.; Wu, D.; Wang, G.D.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Microstructure and texture of high Nb interstitial-free steel

Dongbei Daxue Xuebao/Journal of Northeastern University
2012 | Journal article
EID:

2-s2.0-84863255418
Contributors: Hou, Z.-Y.; Xu, Y.-B.; Wang, J.-F.; Wu, D.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Microstructure and texture of Nb+Ti-IF steels after ultra-short annealing

Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research
2012 | Journal article
EID:

2-s2.0-84863258923
Contributors: Hou, Z.; Xu, Y.; Wu, D.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Microstructure, Mechanical Properties and Texture of a Cold Rolled High Nb-IF Steel Sheet

Journal of Iron and Steel Research
2012 | Journal article
EID:

2-s2.0-84864432658
Contributors: Hou, Z.-Y.; Xu, Y.-B.; Wu, D.; Wang, G.-D.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Recrystallization of ultra-low carbon steel sheet after ultra-rapid annealing

Jinshu Xuebao/Acta Metallurgica Sinica
2012 | Journal article
DOI: 10.3724/SP.J.1037.2012.00115
EID:

2-s2.0-84868225271
Contributors: Hou, Z.; Xu, Y.; Wu, D.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Study of microstructure and texture of Nb-IF high strength steel after cold rolling and annealing

Advanced Materials Research
2012 | Book
DOI: 10.4028/www.scientific.net/AMR.538-541.1208
EID:

2-s2.0-84868362532
Contributors: Hou, Z.; Xu, Y.; Wu, D.; Wang, G.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Microstructure and mechanical properties of ULCB steels affected by advanced TMCP technology

Materials Science Forum
2011 | Book
DOI: 10.4028/www.scientific.net/MSF.689.289
EID:

2-s2.0-79959924208
Contributors: Hou, Z.; Xu, Y.; Wu, D.; Sun, W.; Hu, S.-E.; Wang, G.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Effect of the on-line heating treatment process on microstructure of an ULCB steel plate with high performance

Proceedings of the 10th International Conference on Steel Rolling
2010 | Conference paper
EID:

2-s2.0-84867649222
Contributors: Hou, Z.; Xu, Y.; Sun, W.; Hu, S.; Wu, D.; Wang, G.
Source: Self-asserted source
ziyong hou via Scopus - Elsevier

Peer review (15 reviews for 8 publications/grants)

Review activity for Acta materialia. (1)
Review activity for Applied sciences. (1)
Review activity for Journal of Iron and Steel Research International. (5)
Review activity for Journal of materials science. (1)
Review activity for Materials. (2)
Review activity for Metals. (3)
Review activity for Steel research international (1)
Review activity for The Journal of constructional steel research. (1)
How many people are using ORCID?