Personal information

Activities

Works (50)

Assessment of the as-sintered surfaces of ceramic components additively manufactured by vat Photopolymerization (CerAMVPP)

Open Ceramics
2024-12 | Journal article
Contributors: Nadine Lorenz; Uwe Scheithauer; Eric Schwarzer-Fischer; Sindy Mosch; Martin Propst; Jan Sieder-Katzmann; Christian Bach
Source: check_circle
Crossref

Influence of Various Binder Jet Printers on the Additive Manufacturing of Hardmetals

Crystals
2024-10-31 | Journal article
Contributors: Christian Berger; Johannes Pötschke; Uwe Scheithauer; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Ceramic additive manufacturing and microstructural analysis of tricalcium phosphate implants using X-ray microcomputed tomography

Open Ceramics
2024-09 | Journal article
Part of ISSN: 2666-5395
Contributors: Sascha Senck; Jonathan Glinz; Sarah Heupl; Johann Kastner; Klemens Trieb; Uwe Scheithauer; Sif Sofie Dahl; Martin Bonde Jensen
Source: Self-asserted source
Uwe Scheithauer

Additive manufacturing of ceramic single and multi-material components–A groundbreaking innovation for space applications too?

Acta Astronautica
2024-08 | Journal article
Contributors: Uwe Scheithauer; Eric Schwarzer-Fischer; Jan Sieder-Katzmann; Martin Propst; Johannes Abel; Lisa Gottlieb; Steven Weingarten; Lars Rebenklau; Henry Barth; Christian Bach
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

CerAMfacturing of a ceramic aerospike engine

Acta Astronautica
2024-07 | Journal article
Contributors: Uwe Scheithauer; Eric Schwarzer-Fischer; Jan Sieder-Katzmann; Martin Propst; Christian Bach
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Additive manufacturing of ceramic multi-material heating and ignition elements for a sustainable space access

Acta Astronautica
2024-06 | Journal article
Contributors: Justin Ziener; Uwe Scheithauer; Lisa Gottlieb; Steven Weingarten; Adheena Gana Joseph; Christian Bach
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Potential and challenges for Powder Bed Fusion – Laser Beam (PBF-LB) in industrial ceramic additive manufacturing

Open Ceramics
2024-06 | Journal article
Part of ISSN: 2666-5395
Contributors: Christian Berger; Gabriela Schimo-Aichhorn; Stefan Gronau; Franziska Saft; Sarah Seiringer; Uwe Scheithauer
Source: Self-asserted source
Uwe Scheithauer

Strength testing of additive manufactured ceramics – A round robin using the CharAM-methodology

Open Ceramics
2024-03 | Journal article
Part of ISSN: 2666-5395
Contributors: Maximilian Staudacher; Uwe Scheithauer; Maria Reichel; Nadine Lorenz; Martin Schwentenwein; Tanja Lube
Source: Self-asserted source
Uwe Scheithauer

Test Specimen for Strength Testing of Additive Manufactured Ceramics by the VPP Process: the CharAM-Specimen

2024-02-27 | Dataset
Contributors: Tanja Lube
Source: Self-asserted source
Uwe Scheithauer

Correlation of Different Cemented Carbide Starting Powders with the Resulting Properties of Components Manufactured via Binder Jetting

Metals
2023-11-04 | Journal article
Contributors: Christian Berger; Johannes Pötschke; Uwe Scheithauer; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A novel test specimen for strength testing of ceramics for additive manufacturing

Open Ceramics
2023-09 | Journal article
Part of ISSN: 2666-5395
Contributors: Maximilian Staudacher; Tanja Lube; Jürgen Glettler; Uwe Scheithauer; Martin Schwentenwein
Source: Self-asserted source
Uwe Scheithauer

Effect of infill strategy on the flexural strength of 3Y-TZP bars fabricated by thermoplastic 3D printing (T3DP)

Open Ceramics
2023-06 | Journal article
Contributors: Ipeknaz Özden; Uwe Scheithauer; Aljaž Iveković; Andraž Kocjan
Source: check_circle
Crossref

Potentials of Numerical Methods for Increasing the Productivity of Additive Manufacturing Processes

Ceramics
2023-03-01 | Journal article
Contributors: Uwe Scheithauer; Tetyana Romanova; Oleksandr Pankratov; Eric Schwarzer-Fischer; Martin Schwentenwein; Florian Ertl; Andreas Fischer
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

CerAMfacturing of silicon nitride by using lithography-based ceramic vat photopolymerization (CerAM VPP)

Journal of the European Ceramic Society
2023-02 | Journal article
Contributors: Eric Schwarzer-Fischer; Eveline Zschippang; Willy Kunz; Christof Koplin; Yannick Marian Löw; Uwe Scheithauer; Alexander Michaelis
Source: check_circle
Crossref

CerAMfacturing of Aluminum Nitride with High Thermal Conductivity via Lithography-Based Ceramic Vat Photopolymerization (CerAM VPP)

Ceramics
2023-02-02 | Journal article
Contributors: Eric Schwarzer-Fischer; Uwe Scheithauer; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Reducing the Distortion in Particle Filled Material Extrusion (MEX)-Based Additive Manufacturing (AM) by Means of Modifying the Printing Strategy

Ceramics
2022-12-08 | Journal article
Contributors: Johannes Abel; Siddharth Tiwari; Milán Kardos; Maria Reichel; Uwe Scheithauer
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Study on CerAMfacturing of Novel Alumina Aerospike Nozzles by Lithography-Based Ceramic Vat Photopolymerization (CerAM VPP)

Materials
2022-05-03 | Journal article
Contributors: Eric Schwarzer-Fischer; Johannes Abel; Jan Sieder-Katzmann; Martin Propst; Christian Bach; Uwe Scheithauer; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Study on CerAMfacturing of Novel Alumina Aerospike Nozzles by Lithography-based Ceramic Vat Photopolymerization (CerAM VPP)

2022-03-21 | Preprint
Contributors: Eric Schwarzer-Fischer; Jan Sieder-Katzmann; Johannes Abel; Martin Propst; Christian Bach; Uwe Scheithauer; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Laser Speckle Photometry investigation of the thermal conductivity of 3D printed ceramic green bodies using Multi Material Jetting

Open Ceramics
2021-12 | Journal article
Contributors: David Dang; Steven Weingarten; Fernando Frost; Beatrice Bendjus; Uwe Scheithauer
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Advanced Manufacturing for Advanced Ceramics

Procedia CIRP
2020 | Journal article
Part of ISSN: 2212-8271
Contributors: A. Michaelis; U. Scheithauer; T. Moritz; S. Weingarten; J. Abel; E. Schwarzer; W. Kunz
Source: Self-asserted source
Uwe Scheithauer

Process Data-Based Knowledge Discovery in Additive Manufacturing of Ceramic Materials by Multi-Material Jetting (CerAM MMJ)

Journal of Manufacturing and Materials Processing
2020-07-22 | Journal article
Contributors: Valentin Lang; Steven Weingarten; Hajo Wiemer; Uwe Scheithauer; Felix Glausch; Robert Johne; Alexander Michaelis; Steffen Ihlenfeldt
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Process development for additive manufacturing of functionally graded alumina toughened zirconia components intended for medical implant application

Journal of the European Ceramic Society
2019-02 | Journal article
Part of ISSN: 0955-2219
Contributors: Eric Schwarzer-Fischer; Stefan Holtzhausen; Uwe Scheithauer; Claudia Ortmann; Thomas Oberbach; Tassilo Moritz; Alexander Michaelis
Source: Self-asserted source
Uwe Scheithauer

Alternative Process Routes to Manufacture Porous Ceramics—Opportunities and Challenges

Materials
2019-02-22 | Journal article
Contributors: Uwe Scheithauer; Florian Kerber; Alexander Füssel; Stefan Holtzhausen; Wieland Beckert; Eric Schwarzer; Steven Weingarten; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Potentials and Challenges of Additive Manufacturing Technologies for Heat Exchanger

Advances in Heat Exchangers
2019-02-20 | Book chapter
Part of ISBN: 9781789850734
Part of ISBN: 9781789850741
Contributors: Uwe Scheithauer; Richard Kordaß; Kevin Noack; Martin F. Eichenauer; Mathias Hartmann; Johannes Abel; Gregor Ganzer; Daniel Lordick
Source: Self-asserted source
Uwe Scheithauer

Alternative Process Routes to Manufacture Porous Ceramics – Opportunities and Challenges

2019-02-04 | Preprint
Contributors: Uwe Scheithauer; Florian Kerber; Alexander Füssel; Stefan Holtzhausen; Wieland Beckert; Eric Schwarzer; Steven Weingarten; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Additive Manufacturing of Functionally Graded Ceramic Materials by Stereolithography

Journal of Visualized Experiments
2019-01-25 | Journal article
Part of ISSN: 1940-087X
Contributors: Pablo Gonzalez; Eric Schwarzer; Uwe Scheithauer; Norbertus Kooijmans; Tassilo Moritz
Source: Self-asserted source
Uwe Scheithauer

Fused Filament Fabrication (FFF) of Metal-Ceramic Components

Journal of Visualized Experiments
2019-01-11 | Journal article
Part of ISSN: 1940-087X
Contributors: Johannes Abel; Uwe Scheithauer; Thomas Janics; Stefan Hampel; Santiago Cano; Axel Müller-Köhn; Anne Günther; Christian Kukla; Tassilo Moritz
Source: Self-asserted source
Uwe Scheithauer

Multi-material Ceramic-Based Components – Additive Manufacturing of Black-and-white Zirconia Components by Thermoplastic 3D-Printing (CerAM - T3DP)

Journal of Visualized Experiments
2019-01-07 | Journal article
Part of ISSN: 1940-087X
Contributors: Steven Weingarten; Uwe Scheithauer; Robert Johne; Johannes Abel; Eric Schwarzer; Tassilo Moritz; Alexander Michaelis
Source: Self-asserted source
Uwe Scheithauer

Additive Manufacturing of Ceramic Heat Exchanger: Opportunities and Limits of the Lithography-Based Ceramic Manufacturing (LCM)

Journal of Materials Engineering and Performance
2018-01 | Journal article
Part of ISSN: 1059-9495
Part of ISSN: 1544-1024
Contributors: Uwe Scheithauer; Eric Schwarzer; Tassilo Moritz; Alexander Michaelis
Source: Self-asserted source
Uwe Scheithauer

Investigation of Droplet Deposition for Suspensions Usable for Thermoplastic 3D Printing (T3DP)

Journal of Materials Engineering and Performance
2018-01 | Journal article
Contributors: Uwe Scheithauer; Robert Johne; Steven Weingarten; Eric Schwarzer; Hans-Jürgen Richter; Tassilo Moritz; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Droplet-Based Additive Manufacturing of Hard Metal Components by Thermoplastic 3D Printing (T3DP)

J. Ceram. Sci. Tech.
2017 | Journal article
Contributors:
Source: Self-asserted source
Uwe Scheithauer

Lithography-based ceramic manufacturing (LCM) – Viscosity and cleaning as two quality influencing steps in the process chain of printing green parts

Journal of the European Ceramic Society
2017-12 | Journal article
Part of ISSN: 0955-2219
Contributors: E. Schwarzer; M. Götz; D. Markova; D. Stafford; U. Scheithauer; T. Moritz
Source: Self-asserted source
Uwe Scheithauer

Ceramic-Based 4D Components: Additive Manufacturing (AM) of Ceramic-Based Functionally Graded Materials (FGM) by Thermoplastic 3D Printing (T3DP)

Materials
2017-11-28 | Journal article
Contributors: Uwe Scheithauer; Steven Weingarten; Robert Johne; Eric Schwarzer; Johannes Abel; Hans-Jürgen Richter; Tassilo Moritz; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Ceramic-Based 4D-Components: Additive Manufacturing (AM) of Ceramic-Based Functionally Graded Materials (FGM) by Thermoplastic 3D-Printing (T3DP)

2017-10-10 | Preprint
Contributors: Uwe Scheithauer; Steven Weingarten; Robert Johne; Eric Schwarzer; Johannes Abel; Hans-Jürgen Richter; Tassilo Moritz; Alexander Michaelis
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Additive manufacturing of metallic and ceramic multimaterial components using thermoplastic 3D printing (T3DP) | Additive Herstellung mehrkomponentiger metallischer und keramischer Bauteile mittels Thermoplastischen 3D-Druckes (T3DP)

Keramische Zeitschrift
2016 | Journal article
EID:

2-s2.0-84962227523

Contributors: Hartel, A.; Scheithauer, U.; Schwarzer, E.; Weingarten, S.; Slawik, T.; Richter, H.-J.; Moritz, T.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Micro‐Reactors Made by Lithography‐Based Ceramic Manufacturing (LCM)

Ceramic Transactions Series
2016-05-31 | Conference paper
Part of ISBN: 9781119236009
Part of ISBN: 9781119236016
Part of ISSN: 2637-4390
Contributors: U. Scheithauer; E. Schwarzer; G. Ganzer; A. Kornig; W. Becker; E. Reichelt; M. Jahn; A. Har‐tel; H.J. Richter; T. Moritz et al.
Source: Self-asserted source
Uwe Scheithauer

Additive manufacturing of metal-ceramic-composites by thermoplastic 3D-printing (3DTP)

Journal of Ceramic Science and Technology
2015 | Journal article
EID:

2-s2.0-84932143035

Contributors: Scheithauer, U.; Slawik, T.; Schwarzer, E.; Richter, H.-J.; Moritz, T.; Michaelis, A.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Innovative and novel manufacturing methods of ceramics and metal-ceramic composites for biomedical applications

Journal of the European Ceramic Society
2015 | Journal article
EID:

2-s2.0-84952923283

Contributors: Ahlhelm, M.; Günther, P.; Scheithauer, U.; Schwarzer, E.; Günther, A.; Slawik, T.; Moritz, T.; Michaelis, A.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier
grade
Preferred source (of 2)‎

New lightweight kiln furniture made by combination of ceramic green tapes and extrudates

InterCeram: International Ceramic Review
2015 | Journal article
EID:

2-s2.0-84953231926

Contributors: Scheithauer, U.; Schwarzer, E.; Tscharntke, F.; Schmidt, T.; Jegust, S.; Richter, H.-J.; Moritz, T.; Michaelis, A.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Innovative kiln furniture, their influence on the temperature distribution within the kiln, and a new production technology

InterCeram: International Ceramic Review
2014 | Journal article
EID:

2-s2.0-84951953848

Contributors: Scheithauer, U.; Dannowski, M.; Schwarzer, E.; Slawik, T.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Studies on thermoplastic 3D printing of steel-zirconia composites

Journal of Materials Research
2014 | Journal article
EID:

2-s2.0-84911482674

Contributors: Scheithauer, U.; Bergner, A.; Schwarzer, E.; Richter, H.-J.; Moritz, T.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Thermoplastic 3D Printing-An Additive Manufacturing Method for Producing Dense Ceramics

International Journal of Applied Ceramic Technology
2014 | Journal article
EID:

2-s2.0-84906633060

Contributors: Scheithauer, U.; Schwarzer, E.; Richter, H.-J.; Moritz, T.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Prospects of a new generation of refractories made by ceramic multilayer technology

InterCeram: International Ceramic Review
2012 | Journal article
EID:

2-s2.0-84867122781

Contributors: Hein, J.; Scheithauer, U.; Haderk, K.; Kuna, M.; Michaelis, A.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Spiral winding of ceramic and metallic green tapes | Spiralwickeln keramischer und pulvermetallurgischer grünfolien

Keramische Zeitschrift
2012 | Journal article
EID:

2-s2.0-84857740252

Contributors: Scheithauer, U.; Slawik, T.; Scholl, R.; Handke, T.; Moritz, T.; Baumann, A.; Großmann, H.; Michaelis, A.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Spiral winding technology for multilayer ceramic sleeves | Spiralwickeltechnik für mehrlagige keramische Hülsen

Wochenblatt fuer Papierfabrikation
2012 | Other
EID:

2-s2.0-84888782870

Contributors: Slawik, I.; Handke, T.; Scholl, R.; Scheithauer, U.; Zelm, R.; Moritz, T.; Großmann, H.; Michaelis, A.; Baumann, A.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Development of ceramic tapes for thermal shock resistant calcium aluminate refractory materials with graded porosity

InterCeram: International Ceramic Review
2011 | Journal article
EID:

2-s2.0-84857701167

Contributors: Haderk, K.; Scheithauer, U.; Richter, H.-J.; Petasch, U.; Michaelis, A.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Laminated multilayer for thermal shock resistant refractories based on the material system calcium-aluminate

InterCeram: International Ceramic Review
2011 | Journal article
EID:

2-s2.0-84857754968

Contributors: Scheithauer, U.; Haderk, K.; Richter, H.-J.; Petasch, U.; Michaelis, A.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Microstructural analysis and mechanical properties of Pb(Zr,Ti)O 3 fibers derived by different processing routes

Journal of the American Ceramic Society
2010 | Journal article
EID:

2-s2.0-77955764085

Contributors: Dittmer, R.; Clemens, F.; Schoenecker, A.; Scheithauer, U.; Ismael, M.R.; Graule, T.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Robust LTCC/PZT sensor-actuator-module for aluminium die casting

2009 European Microelectronics and Packaging Conference, EMPC 2009
2009 | Conference paper
EID:

2-s2.0-70449921288

Contributors: Flössel, M.; Scheithauer, U.; Gebhardt, S.; Schönecker, A.; Michaelis, A.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

New technology for producing biaxially reinforced multi-layer knitted fabrics | Neue maschinentechnik zur herstellung von mehrlagengestricken

Melliand Textilberichte
2006 | Other
EID:

2-s2.0-33745599669

Contributors: Schulz, C.; Scheithauer, U.; Cherif, C.
Source: Self-asserted source
Uwe Scheithauer via Scopus - Elsevier

Peer review (2 reviews for 2 publications/grants)

Review activity for Journal of the European Ceramic Society. (1)
Review activity for SN Applied Sciences (1)