Personal information

Activities

Employment (1)

Universidad Politécnica de Madrid - Technical University of Madrid: Madrid, ES

Employment
Source: check_circle
Universidad Politécnica de Madrid UPM

Works (29)

Model-Based input energy control for reproducible AISI 316L laser deposited tracks

Finite Elements in Analysis and Design
2024-09 | Journal article | Investigation
Part of ISSN: 0168-874X
Contributors: P. Álvarez; M.A. Montealegre; M. Díaz; S. Chacón-Fernández; A. García-Beltrán; I. Angulo; J.L. Ocaña; FRANCISCO CORDOVILLA BARO
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO

Tunable superhydrophobic titanium nitride surface by ultrafast laser processing

Ceramics International
2022 | Journal article
EID:

2-s2.0-85137639200

Part of ISSN: 02728842
Contributors: Radhakrishnan, J.; Diaz, M.; Cordovilla, F.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Development of model-based laser irradiation customization strategies for optimized material phase transformations in the laser hardening of Cr-Mo steels

Materials and Design
2021 | Journal article
EID:

2-s2.0-85098175506

Part of ISSN: 18734197 02641275
Contributors: Cordovilla, F.; García-Beltrán, A.; Montealegre, M.A.; Álvarez, P.; Angulo, I.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Characterization and analysis of a novel structural SOI piezoresistive pressure sensor with high sensitivity and linearity

Microsystem Technologies
2020 | Journal article
EID:

2-s2.0-85087650130

Part of ISSN: 14321858 09467076
Contributors: Li, C.; Zhao, L.; Ocaña, J.L.; Cordovilla, F.; Yin, Z.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Direct generation of high-aspect-ratio structures of aisi 316l by laser-assisted powder deposition

Materials
2020 | Journal article
EID:

2-s2.0-85097523880

Part of ISSN: 19961944
Contributors: Alvarez, P.; Montealegre, M.A.; Cordovilla, F.; García-Beltrán, A.; Angulo, I.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Efficacy of laser shock processing of biodegradable Mg and Mg-1Zn alloy on their in vitro corrosion and bacterial response

Surface and Coatings Technology
2020 | Journal article
EID:

2-s2.0-85077032512

Part of ISSN: 02578972
Contributors: Pacha-Olivenza, M.A.; Galván, J.C.; Porro, J.A.; Lieblich, M.; Díaz, M.; Angulo, I.; Cordovilla, F.; García-Galván, F.R.; Fernández-Calderón, M.C.; González-Martín, M.L. et al.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Improvement of metallic surfaces hydrophobicity and corrosion resistance by direct write and combined direct write-DLIP hierarchical micro-nano structuring

Proceedings of SPIE - The International Society for Optical Engineering
2020 | Conference paper
EID:

2-s2.0-85086045349

Part of ISSN: 1996756X 0277786X
Contributors: Ocaña, J.L.; Huerta-Murillo, D.; Lasagni, A.F.; Aguilar-Morales, A.I.; Alamri, S.; Cardoso, J.T.; García-Beltrán, A.; Cordovilla, F.; Angulo, I.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Integrated numerical-experimental assessment of the effect of the az31b anisotropic behaviour in extended-surface treatments by laser shock processing

Metals
2020 | Journal article
EID:

2-s2.0-85079069299

Part of ISSN: 20754701
Contributors: Angulo, I.; Cordovilla, F.; García-beltrán, Á.; Porro, J.A.; Díaz, M.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Modification of Ti6Al4V surface properties by combined DLW-DLIP hierarchical micro-nano structuring

Advanced Optical Technologies
2020 | Journal article
EID:

2-s2.0-85084401532

Part of ISSN: 21928584 21928576
Contributors: Ocaña, J.L.; Huerta-Murillo, D.; Lasagni, A.F.; Aguilar-Morales, A.I.; Alamri, S.; Cardoso, J.T.; García-Beltrán, A.; Cordovilla, F.; Angulo, I.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Customized laser beam intensity distribution for the laser surface treatment of geometrically convoluted components

Journal of Materials Processing Technology
2019 | Journal article
EID:

2-s2.0-85052145318

Part of ISSN: 09240136
Contributors: Sancho, P.; Cordovilla, F.; Dominguez, J.; Montealegre, M.Á.; Isaza, J.; García-Beltrán, Á.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Effect of Three Different Finishing Processes on the Surface Morphology and Fatigue Life of A357.0 Parts Produced by Laser-Based Powder Bed Fusion

Advanced Engineering Materials
2019 | Journal article
EID:

2-s2.0-85069893790

Part of ISSN: 15272648 14381656
Contributors: Gatto, A.; Bassoli, E.; Denti, L.; Sola, A.; Tognoli, E.; Comin, A.; Porro, J.A.; Cordovilla, F.; Angulo, I.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

The effect of material cyclic deformation properties on residual stress generation by laser shock processing

International Journal of Mechanical Sciences
2019 | Journal article
EID:

2-s2.0-85064092190

Part of ISSN: 00207403
Contributors: Angulo, I.; Cordovilla, F.; García-Beltrán, A.; Smyth, N.S.; Langer, K.; Fitzpatrick, M.E.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Wettability modification of laser-fabricated hierarchical surface structures in Ti-6Al-4V titanium alloy

Applied Surface Science
2019 | Journal article
EID:

2-s2.0-85052955201

Part of ISSN: 01694332
Contributors: Huerta-Murillo, D.; García-Girón, A.; Romano, J.M.; Cardoso, J.T.; Cordovilla, F.; Walker, M.; Dimov, S.S.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Design optimization and fabrication of a novel structural piezoresistive pressure sensor for micro-pressure measurement

Solid-State Electronics
2018 | Journal article
EID:

2-s2.0-85031752084

Part of ISSN: 00381101
Contributors: Li, C.; Cordovilla, F.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Design optimization and fabrication of a novel structural soi piezoresistive pressure sensor with high accuracy

Sensors (Switzerland)
2018 | Journal article
EID:

2-s2.0-85041441170

Part of ISSN: 14248220
Contributors: Li, C.; Cordovilla, F.; Jagdheesh, R.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Design, fabrication and characterization of an annularly grooved membrane combined with rood beam piezoresistive pressure sensor for low pressure measurements

Sensors and Actuators, A: Physical
2018 | Journal article
EID:

2-s2.0-85049464847

Part of ISSN: 09244247
Contributors: Li, C.; Xie, J.; Cordovilla, F.; Zhou, J.; Jagdheesh, R.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Laser shock processing as an advanced technique for the surface and mechanical resistance properties modification of bioabsorbable magnesium alloys

Materials Science Forum
2018 | Book
EID:

2-s2.0-85064091088

Part of ISSN: 16629752 02555476
Contributors: Ocaña, J.L.; González-Carrasco, J.L.; Lieblich, M.; Porro, J.A.; Díaz, M.; Cordovilla, F.; Angulo, I.; Izaguirre, I.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Minimization of the thermal impact in the laser welding of dissimilar stainless steels

Metals
2018 | Journal article
EID:

2-s2.0-85052550491

Part of ISSN: 20754701
Contributors: Cordovilla, F.; Tur, A.; García-Beltrán, Á.; Diaz, M.; Angulo, I.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Numerical-experimental study of the consolidation phenomenon in the selective laser melting process with a thermo-fluidic coupled model

Materials
2018 | Journal article
EID:

2-s2.0-85051775042

Part of ISSN: 19961944
Contributors: Cordovilla, F.; García-Beltrán, Á.; Garzón, M.; Muñoz, D.A.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Superhydrophobicity on hierarchical periodic surface structures fabricated via direct laser writing and direct laser interference patterning on an aluminium alloy

Optics and Lasers in Engineering
2018 | Journal article
EID:

2-s2.0-85052292107

Part of ISSN: 01438166
Contributors: Cardoso, J.T.; Aguilar-Morales, A.I.; Alamri, S.; Huerta-Murillo, D.; Cordovilla, F.; Lasagni, A.F.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Annularly grooved membrane combined with rood beam piezoresistive pressure sensor for low pressure applications

Review of Scientific Instruments
2017 | Journal article
EID:

2-s2.0-85015686819

Part of ISSN: 10897623 00346748
Contributors: Li, C.; Cordovilla, F.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Design and optimization of a novel structural MEMS piezoresistive pressure sensor

Microsystem Technologies
2017 | Journal article
EID:

2-s2.0-84994709406

Part of ISSN: 09467076
Contributors: Li, C.; Cordovilla, F.; Jagdheesh, R.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Minimization of the thermal material effects on pulsed dynamic laser welding

Journal of Materials Processing Technology
2017 | Journal article
EID:

2-s2.0-85015629566

Part of ISSN: 09240136
Contributors: Tur, A.; Cordovilla, F.; García-Beltrán, Á.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Robust generation of bio-inspired ultrahydrophobic metallic surfaces by nanosecond pulsed lasers

International Journal of Microstructure and Materials Properties
2017 | Journal article
EID:

2-s2.0-85045537287

Part of ISSN: 17418429 17418410
Contributors: Ocaña, J.L.; Jagdheesh, R.; Díaz, M.; Porro, J.A.; Cordovilla, F.; Angulo, I.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

The design and analysis of a novel structural piezoresistive pressure sensor for low pressure measurement

Microsystem Technologies
2017 | Journal article
EID:

2-s2.0-85018766277

Part of ISSN: 09467076
Contributors: Li, C.; Cordovilla, F.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Caracterización de la reacción de oxidación superficial y su influencia sobre la absorción de radiación durante el proceso de temple superficial con láser para el acero 42CrMo4 Characterization of the surface oxidation reaction and its influence on the radiation absorption during the surface laser hardening process of the 42CrMo4 steel

Revista de Metalurgia
2016 | Journal article
EID:

2-s2.0-84978370450

Part of ISSN: 19884222 00348570
Contributors: Cordovilla, F.; Domínguez, J.; Sancho, P.; García-Beltrán, A.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Numerical/experimental analysis of the laser surface hardening with overlapped tracks to design the configuration of the process for Cr-Mo steels

Materials and Design
2016 | Journal article
EID:

2-s2.0-84963963417

Part of ISSN: 18734197 02641275
Contributors: Cordovilla, F.; García-Beltrán, Á.; Sancho, P.; Domínguez, J.; Ruiz-de-Lara, L.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

Numerical-experimental analysis of the effect of surface oxidation on the laser transformation hardening of Cr-Mo steels

Applied Surface Science
2015 | Journal article
EID:

2-s2.0-84949519261

Part of ISSN: 01694332
Contributors: Cordovilla, F.; García-Beltrán, Á.; Dominguez, J.; Sancho, P.; Ocaña, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier

The practical implementation of laser surface hardening requires a proper determination of the specific working parameters for each application,Aplicación de modelos simplificados para la determinación de ventanas de trabajo para el temple de aceros por láser

Dyna (Spain)
2014 | Journal article
EID:

2-s2.0-84907484881

Part of ISSN: 19891490 00127361
Contributors: Cordovilla-Baró, F.; García-Beltrán, A.; Ocaña-Moreno, J.L.
Source: Self-asserted source
FRANCISCO CORDOVILLA BARO via Scopus - Elsevier