Personal information

Emails & domains

Verified email addresses

Verified email domains

Other IDs

Scopus Author ID: 56342699700
ResearcherID: M-4902-2016

Keywords

severe plastic deformation, magnesium, titanium, glow discharge optical emission spectrometry, biodegradable materials

Countries

Czech Republic

Activities

Collapse all

Employment (2)

České Vysoké Učení Technické v Praze Fakulta Jaderná a Fyzikálně inženýrská: Praha, CZ

2018-08-01 to present | junior researcher (Department of Materials)
Employment
Source: Self-asserted source
Karel Tesař

FZU – Institute of Physics of the Czech Academy of Sciences: Praha, CZ

2011 to present (Department of Dielectrics)
Employment
Source: Self-asserted source
Karel Tesař

Works (23)

In vivo and in vitro study of resorbable magnesium wires for medical implants: Mg purity, surface quality, Zn alloying and polymer coating

Journal of Magnesium and Alloys
2024-06 | Journal article
DOI: 10.1016/j.jma.2024.06.003
Contributors: K. Tesař; J. Luňáčková; M. Jex; M. Žaloudková; R. Vrbová; M. Bartoš; P. Klein; L. Vištejnová; J. Dušková; E. Filová et al.
Source: check_circle
Crossref

Dispersion of stable quasicrystal phase by precipitation during extrusion in a Mg–Zn–Al alloy: Microstructure and mechanical properties

Materials Science and Engineering: A
2024-01 | Journal article
DOI: 10.1016/j.msea.2023.145979
Contributors: Alok Singh; Hidetoshi Somekawa; Takanobu Hiroto; Machiko Ode; Karel Tesař; Jaroslav Čech; Toru Hara
Source: check_circle
Crossref

Extraction of the dominant substructure of fracture surfaces in 3D

Engineering Failure Analysis
2023 | Journal article
DOI: 10.1016/j.engfailanal.2022.106999
EID:

2-s2.0-85144628320

Part of ISSN: 13506307
Contributors: Lauschmann, H.; Kukal, J.; Jiroušková, K.; Tesař, K.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier

Texture, elastic anisotropy and thermal stability of commercially pure titanium prepared by room temperature ECAP

Materials and Design
2023 | Journal article
DOI: 10.1016/j.matdes.2023.111678
EID:

2-s2.0-85147542696

Part of ISSN: 18734197 02641275
Contributors: Tesař, K.; Koller, M.; Vokoun, D.; Tyc, O.; Čech, J.; Sedlák, P.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier

Precipitation of stable icosahedral quasicrystal phase in a Mg-Zn-Al alloy

Acta Materialia
2022 | Journal article
DOI: 10.1016/j.actamat.2021.117563
EID:

2-s2.0-85121765517

Part of ISSN: 13596454
Contributors: Singh, A.; Hiroto, T.; Ode, M.; Takakura, H.; Tesař, K.; Somekawa, H.; Hara, T.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier

Achieving Yield Symmetry in an Extruded Mg-Zn-Y Alloy by More Effective Dispersion of Quasicrystalline <i>i</i>-Phase

Metallurgical and Materials Transactions A
2021 | Journal article
DOI: 10.1007/S11661-021-06209-5
WOSUID: WOS:000632360800004
Contributors: Tesar, Karel; Somekawa, Hidetoshi; Singh, Alok
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

3d textural analysis of fatigue fracture surfaces

Defect and Diffusion Forum
2020 | Journal article
DOI: 10.4028/www.scientific.net/DDF.405.259
EID:

2-s2.0-85097631698

Part of ISSN: 16629507 10120386
Contributors: Lauschmann, H.; Tesař, K.; Vronková, T.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier

Compression of ecaped titanium micro-pillars for two principal orientations

Acta Polytechnica CTU Proceedings
2020 | Conference paper
DOI: 10.14311/APP.2020.27.0001
EID:

2-s2.0-85100885280

Part of ISSN: 23365382
Contributors: Vokoun, D.; Maňák, J.; Tesař, K.; Habr, S.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier

Development of texture and grain size during extrusion of ZA63 alloy containing stable quasicrystalline i-phase and its effect on tensile and compression strength

Journal of Alloys and Compounds
2020 | Journal article
DOI: 10.1016/j.jallcom.2020.156340
EID:

2-s2.0-85089567020

Part of ISSN: 09258388
Contributors: Tesař, K.; Somekawa, H.; Singh, A.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier
grade
Preferred source (of 2)‎

Direct extrusion of thin Mg wires for biomedical applications

Transactions of Nonferrous Metals Society of China (English Edition)
2020 | Journal article
DOI: 10.1016/S1003-6326(20)65219-0
EID:

2-s2.0-85080107793
Contributors: TESAŘ, K.; BALÍK, K.; SUCHARDA, Z.; JÄGER, A.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier

Microstructure and micromechanical properties of GaV<inf>4</inf>S<inf>8</inf> ceramics prepared by single-step solid state synthesis

Ceramics International
2020 | Journal article
DOI: 10.1016/j.ceramint.2019.11.194
EID:

2-s2.0-85075889368
Contributors: Tesař, K.; Maňák, J.; Vaněk, P.; Drahokoupil, J.; Hlinka, J.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier

Nucleation of corrosion products on H-2 bubbles A problem for biodegradable magnesium implants?

Materials Today
2020 | Journal article
DOI: 10.1016/J.MATTOD.2020.04.001
WOSUID: WOS:000537707100027
Contributors: Tesar, K.; Balik, K.
Source: check_circle
Web of Science Researcher Profile Sync
grade
Preferred source (of 2)‎

Fe-stabilized duplex α/β microstructure containing γ titanium hydride in Ti grade 2 obtained by volumetrically incomplete phase transition

Materials Characterization
2019 | Journal article
DOI: 10.1016/j.matchar.2019.04.045
EID:

2-s2.0-85065226990
Contributors: Tesař, K.; Gärtnerová, V.; Němec, M.; Jäger, A.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier
grade
Preferred source (of 2)‎

Quantitative fractography of fatigue cracks: A new solution in 3D

Procedia Structural Integrity
2019 | Conference paper
DOI: 10.1016/j.prostr.2020.01.071
EID:

2-s2.0-85094210658

Part of ISSN: 24523216
Contributors: Lauschmann, H.; Tesař, K.; Jiroušková, K.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier

Raman scattering yields cubic crystal grain orientation

Scientific Reports
2019-06-28 | Journal article
DOI: 10.1038/s41598-019-45782-z
Contributors: K. Tesar; I. Gregora; P. Beresova; P. Vanek; P. Ondrejkovic; J. Hlinka
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Microstructure and micromechanical properties of Mg microtubes prepared by laser dieless drawing

Key Engineering Materials
2018 | Book
DOI: 10.4028/www.scientific.net/KEM.784.21
EID:

2-s2.0-85085196204

Part of ISSN: 16629795 10139826
Contributors: Jäger, A.; Tesař, K.; Nĕmeček, J.; Milenin, A.; Nĕmeček, J.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier

TiO<inf>2</inf> nanotubes grown on Ti substrates with different microstructure

Materials Research Bulletin
2018 | Journal article
DOI: 10.1016/j.materresbull.2018.03.036
EID:

2-s2.0-85044471783
Contributors: Sopha, H.; Tesar, K.; Knotek, P.; Jäger, A.; Hromadko, L.; Macak, J.M.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier
grade
Preferred source (of 2)‎

Flow softening and dynamic recrystallization behavior of BT9 titanium alloy: A study using process map development

Journal of Alloys and Compounds
2017 | Journal article
DOI: 10.1016/j.jallcom.2016.10.322
EID:

2-s2.0-85006961524
Contributors: Ghasemi, E.; Zarei-Hanzaki, A.; Farabi, E.; Tesař, K.; J�ger, A.; Rezaee, M.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier
grade
Preferred source (of 2)‎

Influence of alloying element Zn on the microstructural, mechanical and corrosion properties of binary Mg-Zn alloys after severe plastic deformation

Materials Characterization
2017-12 | Journal article
DOI: 10.1016/j.matchar.2017.10.017
Contributors: Martin Němec; Aleš Jäger; Karel Tesař; Viera Gärtnerová
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Self-organized Anodic TiO<inf>2</inf> Nanotube Layers: Influence of the Ti substrate on Nanotube Growth and Dimensions

Electrochimica Acta
2016 | Journal article
DOI: 10.1016/j.electacta.2015.12.121
EID:

2-s2.0-84954224930
Contributors: Sopha, H.; Jäger, A.; Knotek, P.; Tesař, K.; Jarosova, M.; Macak, J.M.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier
grade
Preferred source (of 2)‎

Twinning-detwinning assisted reversible plasticity in thin magnesium wires prepared by one-step direct extrusion

Materials and Design
2016 | Journal article
DOI: 10.1016/j.matdes.2016.08.016
EID:

2-s2.0-84983488606
Contributors: Jäger, A.; Habr, S.; Tesař, K.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier
grade
Preferred source (of 2)‎

Microstructure and anisotropy of the mechanical properties in commercially pure titanium after equal channel angular pressing with back pressure at room temperature

Materials Science and Engineering A
2015 | Journal article
DOI: 10.1016/j.msea.2015.07.038
EID:

2-s2.0-84938089995
Contributors: Jäger, A.; Gärtnerova, V.; Tesař, K.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier
grade
Preferred source (of 2)‎

Electron backscatter diffraction analysis of the crack development induced by uniaxial tension in commercially pure titanium

Materials Science and Engineering A
2014 | Journal article
DOI: 10.1016/j.msea.2014.08.028
EID:

2-s2.0-84906760992
Contributors: Tesař, K.; Jäger, A.
Source: Self-asserted source
Karel Tesař via Scopus - Elsevier
grade
Preferred source (of 2)‎

Peer review (1 review for 1 publication/grant)

Review activity for JOM. (1)
How many people are using ORCID?