Personal information

Activities

Employment (1)

Islamic University of Madinah: Madinah, SA

2023-10-04 to present | Professor (Mechanical Engineering)
Employment
Source: Self-asserted source
Essam R. I.

Education and qualifications (1)

Osaka University: Osaka, Osaka, JP

2005-10-01 to 2009-10-01 | Ph.D. (Materials Engineering and Technology)
Education
Source: Self-asserted source
Essam R. I.

Works (46)

Progression of high-adherent hard chromium-based coating on cast iron exploiting cathodic-arc PVD technique for higher wear resistance

The International Journal of Advanced Manufacturing Technology
2025-01 | Journal article
Part of ISSN: 0268-3768
Part of ISSN: 1433-3015
Contributors: Ahmed A. D. Sarhan; Mohamed I. Abdelaziz; Nestor K. Ankah; Akeem Yusuf Adesina; Mohamed A. Hussein; Mohammed Abdul Samad; Murtuza M. A. Baig; Ahmad A. Sorour; Abdulrahman Aljabri; Essam R. I. Mahmoud et al.
Source: Self-asserted source
Essam R. I.

Current–Pressure Dynamics Modeling on an Annular Magnetorheological Valve for an Adaptive Rehabilitation Device for Disabled Individuals

Micromachines
2025-01-26 | Journal article
Contributors: Fitrian Imaduddin; Zaenal Arifin; Ubaidillah; Essam Rabea Ibrahim Mahmoud; Abdulrahman Aljabri
Source: check_circle
Crossref
grade
Preferred source (of 5)‎

Modeling of size dependent buckling behavior of piezoelectric sandwich perforated nanobeams rested on elastic foundation with flexoelectricity

Mechanics Based Design of Structures and Machines
2025-01-02 | Journal article
Part of ISSN: 1539-7734
Part of ISSN: 1539-7742
Contributors: Alaa A. Abdelrahman; Hanaa E. Abdel-Mottaleb; Abdulrahman Aljabri; Essam R. I. Mahmoud; Mohamed A. Eltaher
Source: Self-asserted source
Essam R. I.
grade
Preferred source (of 2)‎

Enhanced Removal of Chlorpyrifos, Cu(II), Pb(II), and Iodine from Aqueous Solutions Using Ficus Nitida and Date Palm Biochars

ChemEngineering
2024-10-12 | Journal article
Part of ISSN: 2305-7084
Contributors: Essam R. I. Mahmoud; Hesham M. Aly; Noura A. Hassan; Abdulrahman Aljabri; Asim Laeeq Khan; Hashem F. El-Labban
Source: Self-asserted source
Essam R. I.

Utilizing Date Palm Leaf Biochar for Simultaneous Adsorption of Pb(II) and Iodine from Aqueous Solutions

Processes
2024-07-01 | Journal article
Contributors: Essam R. I. Mahmoud; Hesham M. Aly; Noura A. Hassan; Abdulrahman Aljabri; Asim Laeeq Khan; Hashem F. El-Labban
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Biochar from Date Palm Waste via Two-Step Pyrolysis: A Modified Approach for Cu (II) Removal from Aqueous Solutions

Processes
2024-06-09 | Journal article
Contributors: Essam R. I. Mahmoud; Hesham M. Aly; Noura A. Hassan; Abdulrahman Aljabri; Asim Laeeq Khan; Hashem F. El-Labban
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Theoretical Analysis of Rolling Force during Cold Rolling with Roll Crossing and Shifting System

Journal of Manufacturing and Materials Processing
2023-05-24 | Journal article
Part of ISSN: 2504-4494
Contributors: Abdulrahman Aljabri; Hasan Tibar; Essam R. I. Mahmoud; Hamad Almohamadi; Feijun Qu; Zhengyi Jiang
Source: Self-asserted source
Essam R. I.

Comparison of Machining Simulations of Aerospace Alloy Al6061-T6 Using Lagrangian and Smoothed Particle Hydrodynamics Techniques

Lubricants
2022-11-15 | Journal article
Part of ISSN: 2075-4442
Contributors: Muhammad Nauman Nawaz; Sohaib Zia Khan; Muhammad Asif; Abdulrahman Aljabri; Syed Asad Ali Zaidi; Essam R. I. Mahmoud
Source: Self-asserted source
Essam R. I.

Re-Entrant Honeycomb Auxetic Structure with Enhanced Directional Properties

Materials
2022-11-14 | Journal article
Part of ISSN: 1996-1944
Contributors: Farrukh Mustahsan; Sohaib Zia Khan; Syed Asad Ali Zaidi; Yaser H. Alahmadi; Essam R. I. Mahmoud; Hamad Almohamadi
Source: Self-asserted source
Essam R. I.

Corrosion Behavior of Cold-Rolled and Solution-Treated Fe36Mn20Ni20Cr16Al5Si3 HEA in Different Acidic Solutions

Materials
2022-10-19 | Journal article
Contributors: Essam R. I. Mahmoud; Lamiaa Z. Mohamed; Mohamed A. Gepreel; Saad Ebied; Aliaa Abdelfatah
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Assessment of Sand and Glass Industry in Saudi Arabia

Sustainability
2022-10-10 | Journal article
Contributors: Essam R. I. Mahmoud; Awaluddin Mohamed Shaharoun; Abdulrahman Aljabri; Hamad Almohamadi; Mohammed Farhan
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Free Intermetallic Cladding Interface between Aluminum and Steel through Friction Stir Processing

Crystals
2022-10-06 | Journal article
Part of ISSN: 2073-4352
Contributors: Essam R. I. Mahmoud; Sohaib Zia Khan; Abdulrahman Aljabri; Hamad Almohamadi; Mohamed Abdelghany Elkotb; Mohamed Abdelhady Gepreel; Saad Ebied
Source: Self-asserted source
Essam R. I.

Studying the Effect of Cold Rolling and Heat Treatment on the Microstructure and Mechanical Properties of the Fe36Mn20Ni20Cr16Al5Si3 High Entropy Alloy

Entropy
2022-07-28 | Journal article
Contributors: Essam R. I. Mahmoud; Awaludin Shaharoun; Mohamed A. Gepreel; Saad Ebied
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Phase Prediction, Microstructure and Mechanical Properties of Fe–Mn–Ni–Cr–Al–Si High Entropy Alloys

Metals
2022-07-08 | Journal article
Contributors: Essam R. I. Mahmoud; Awaluddin Shaharoun; Mohamed A. Gepreel; Saad Ebied
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

A novel modified re-entrant honeycomb structure to enhance the auxetic behavior: Analytical and numerical study by FEA

Materials Today: Proceedings
2021 | Journal article
Part of ISSN: 2214-7853
Contributors: Sohaib Z. Khan; Farrukh Mustahsan; Essam R.I. Mahmoud; S.H. Masood
Source: Self-asserted source
Essam R. I.

Laser surface cladding of mild steel with 316L stainless steel for anti-corrosion applications

Materials Today: Proceedings
2021 | Journal article
Part of ISSN: 2214-7853
Contributors: Essam R.I. Mahmoud; Sohaib Z. Khan; Muhammad Ejaz
Source: Self-asserted source
Essam R. I.

A Study on the Fiber YAG Laser Welding of 304L Stainless Steel

Metals
2021-12-14 | Journal article
Part of ISSN: 2075-4701
Contributors: Essam R. I. Mahmoud; Hamad Almohamadi; Abdulrahman Aljabri; Mohamed Abdelghany Elkotb
Source: Self-asserted source
Essam R. I.

Fabrication and Characterization of Steel-Base Metal Matrix Composites Reinforced by Yttria Nanoparticles through Friction Stir Processing

Materials
2021-12-10 | Journal article
Contributors: Essam R. I. Mahmoud; Hamad Almohamadi; Abdulrahman Aljabri; Sohaib Z. Khan; Ahmad N. Saquib; Mohammed Farhan; Mohammed Abdel-Ghani Elkotb
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Study on Microstructure Characterisation of Three Different Surface Coating Techniques on 6082-T6 Aluminum Alloy

Metals and Materials International
2021-10 | Journal article
Part of ISSN: 1598-9623
Part of ISSN: 2005-4149
Contributors: Essam R. I. Mahmoud; Ali Algahtani; Vineet Tirth
Source: Self-asserted source
Essam R. I.

MICROSTRUCTURE AND MECHANICAL CHARACTERIZATIONS OF LM6-AL/AL2O3 METAL MATRIX COMPOSITES PRODUCED BY STIR CASTING TECHNIQUE

Jurnal Teknologi
2021-08-01 | Journal article
Contributors: Essam R. !. Mahmoud; A. Shaharoun; S. Z. Khan; F. O. Elmahroogy; H. Almohamadi
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Catalytic Pyrolysis of Municipal Solid Waste: Effects of Pyrolysis Parameters

Bulletin of Chemical Reaction Engineering & Catalysis
2021-06-30 | Journal article
Contributors: Hamad AlMohamadi; Abdulrahman Aljabri; Essam R.I. Mahmoud; Sohaib Z. Khan; Meshal S. Aljohani; Rashid Shamsuddin
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Nanoparticles Synergistic Effect with Various Substrate Pretreatment and their Comparison on Biogas Production from Algae Waste

Bulletin of Chemical Reaction Engineering & Catalysis
2021-06-30 | Journal article
Contributors: Asad A. Zaidi; Sohaib Zia Khan; Hamad Almohamadi; Essam R. I. Mahmoud; Muhammad N. Naseer
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of pressure on ageing response of (SiC + Al2O3)/6063 composites

Journal of Materials Research and Technology
2020-09 | Journal article
Part of ISSN: 2238-7854
Contributors: Vineet Tirth; Mohammed Abdel Ghani Elkotb; Irfan Anjum Badruddin; Essam R.I. Mahmoud; Saiful Islam; Bahaa M. Kamel
Source: Self-asserted source
Essam R. I.

Microstructural characterization of different metal matrix composite claddings reinforced by TiC through YAG laser cladding

Materials Research Express
2020-06-01 | Journal article
Contributors: Essam R I Mahmoud; Vineet Tirth; Ali Algahtani; Sohaib Z Khan
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Kharif Crops Selection for Sustainable Farming Practices in the Rajasthan-India Using Multiple Attribute-Based Decision-Making

Agronomy
2020-04 | Journal article | Author
Contributors: Vineet Tirth; Ram Karan Singh; Saiful Islam; Irfan Anjum Badruddin; Rini Asnida Binti Abdullah; Ali Algahtani; Essam R. I.; Amir Arabi; Neeraj Kumar Shukla; Parul Gupta
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

The investigation of the fatigue failure of nickel-based superalloy 718 choke valve stems used in offshore subsea water injection service

Engineering Failure Analysis
2020-03 | Journal article
Part of ISSN: 1350-6307
Contributors: Muhammad Ejaz; Essam R.I. Mahmoud; Sohaib Z. Khan
Source: Self-asserted source
Essam R. I.

Compressive behaviour of Neovius Triply Periodic Minimal Surface cellular structure manufactured by fused deposition modelling

Virtual and Physical Prototyping
2019-10-02 | Journal article
Part of ISSN: 1745-2759
Part of ISSN: 1745-2767
Contributors: Sohaib Zia Khan; S. H. Masood; Essam Ibrahim; Zaini Ahmad
Source: Self-asserted source
Essam R. I.

Erosion and corrosion resistance of plasma electrolytic oxidized 6082 aluminum alloy surface at low and high temperatures

Journal of Materials Research and Technology
2019-05 | Journal article
Part of ISSN: 2238-7854
Contributors: Ali Algahtani; Essam R.I. Mahmoud
Source: Self-asserted source
Essam R. I.

Experimental Evaluation of Interfacial Surface Cracks in Friction Welded Dissimilar Metals through Image Segmentation Technique (IST)

Materials
2018-12-04 | Journal article
Part of ISSN: 1996-1944
Contributors: Dr. Gulam Mohammed Sayeed Ahmed; Ali Algahtani; Essam R. I. Mahmoud; Irfan Anjum Badruddin
Source: Self-asserted source
Essam R. I.

Tribological characterization of stir cast 2218 alloy-5%-alumina-titania hybrid microcomposites developed by liquid forging

Materials Express
2018-12-01 | Journal article
Part of ISSN: 2158-5849
Contributors: Vineet Tirth; Ali Algahtani; Essam R. I. Mahmoud
Source: Self-asserted source
Essam R. I.

Experimental Studies on Corrosion Behavior of Ceramic Surface Coating using Different Deposition Techniques on 6082-T6 Aluminum Alloy

Processes
2018-11-26 | Journal article
Part of ISSN: 2227-9717
Contributors: Ali Algahtani; Essam Mahmoud; Sohaib Zia Khan; Vineet Tirth
Source: Self-asserted source
Essam R. I.

Preparation and characterization of squeeze cast-Al–Si piston alloy reinforced by Ni and nano-Al2O3 particles

Journal of King Saud University - Engineering Sciences
2016-07 | Journal article
Part of ISSN: 1018-3639
Contributors: Hashem F. El-Labban; M. Abdelaziz; Essam R.I. Mahmoud
Source: Self-asserted source
Essam R. I.

Characterization of Aluminum-Based-Surface Matrix Composites with Iron and Iron Oxide Fabricated by Friction Stir Processing

Materials
2016-06-23 | Journal article
Part of ISSN: 1996-1944
Contributors: Essam Mahmoud; Mahmoud Tash
Source: Self-asserted source
Essam R. I.

Development of in-Situ Al-Si/CuAl2 Metal Matrix Composites: Microstructure, Hardness, and Wear Behavior

Materials
2016-06-02 | Journal article
Part of ISSN: 1996-1944
Contributors: Mahmoud Tash; Essam Mahmoud
Source: Self-asserted source
Essam R. I.

Fabrication of In-Situ Al–Cu Intermetallics on Aluminum Surface by Friction Stir Processing

Arabian Journal for Science and Engineering
2016-05 | Journal article
Part of ISSN: 1319-8025
Part of ISSN: 2191-4281
Contributors: Essam R. I. Mahmoud; Ali M. A. Al-qozaim
Source: Self-asserted source
Essam R. I.

Microstructure, Wear, and Corrosion Characteristics of TiC-Laser Surface Cladding on Low-Carbon Steel

Metallurgical and Materials Transactions B
2016-04 | Journal article
Part of ISSN: 1073-5615
Part of ISSN: 1543-1916
Contributors: Hashem F. El-Labban; Essam Rabea Ibrahim Mahmoud; Ali Algahtani
Source: Self-asserted source
Essam R. I.

Welding of AA 6028 Aluminum Alloy and Its Nanocomposite Using Different Filler Materials

MATERIALS TRANSACTIONS
2015 | Journal article
Part of ISSN: 1345-9678
Part of ISSN: 1347-5320
Contributors: Hashem F. El-Labban; Essam R. I. Mahmoud
Source: Self-asserted source
Essam R. I.

Formation of VC-composite surface layer on high C–Cr bearing tool steel by laser surface cladding

Journal of Manufacturing Processes
2015-10 | Journal article
Part of ISSN: 1526-6125
Contributors: Hashem F. El-Labban; Essam R.I. Mahmoud; Hussein Al-Wadai
Source: Self-asserted source
Essam R. I.

Characterizations of 304 stainless steel laser cladded with titanium carbide particles

Advances in Production Engineering & Management
2015-09-05 | Journal article
Part of ISSN: 1854-6250
Part of ISSN: 1855-6531
Contributors: E.R.I. Mahmoud
Source: Self-asserted source
Essam R. I.

Modification of microstructures for hypoeutectic, eutectic and hypereutectic Al–Cu binary alloys

International Journal of Cast Metals Research
2015-04 | Journal article
Part of ISSN: 1364-0461
Part of ISSN: 1743-1336
Contributors: H. F. El-Labban; E. R. I. Mahmoud
Source: Self-asserted source
Essam R. I.

Laser cladding of Ti-6Al-4V alloy with vanadium carbide particles

Advances in Production Engineering & Management
2014-12-04 | Journal article
Part of ISSN: 1854-6250
Part of ISSN: 1855-6531
Contributors: H.F. El-Labban; E.R.I. Mahmoud; H. Al-Wadai
Source: Self-asserted source
Essam R. I.

Coating of 6028 Aluminum Alloy Using Aluminum Piston Alloy and Al-Si Alloy-Based Nanocomposites Produced by the Addition of Al-Ti5-B1 to the Matrix Melt

Metallurgical and Materials Transactions B
2014-10 | Journal article
Part of ISSN: 1073-5615
Part of ISSN: 1543-1916
Contributors: Hashem F. El-Labban; M. Abdelaziz; Essam R. I. Mahmoud
Source: Self-asserted source
Essam R. I.

Microstructure and Wear Behavior of TiC Coating Deposited on Spheroidized Graphite Cast Iron Using Laser Surfacing

Engineering, Technology & Applied Science Research
2014-10-11 | Journal article
Part of ISSN: 1792-8036
Part of ISSN: 2241-4487
Contributors: E. R. I. Mahmoud; H. F. El-Labban
Source: Self-asserted source
Essam R. I.

Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing

Wear
2010-03 | Journal article
Part of ISSN: 0043-1648
Contributors: Essam R.I. Mahmoud; Makoto Takahashi; Toshiya Shibayanagi; Kenji Ikeuchi
Source: Self-asserted source
Essam R. I.
grade
Preferred source (of 2)‎

Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface

Science and Technology of Welding and Joining
2009-07 | Journal article
Part of ISSN: 1362-1718
Part of ISSN: 1743-2936
Contributors: E. R. I. Mahmoud; M. Takahashi; T. Shibayanagi; K. Ikeuchi
Source: Self-asserted source
Essam R. I.

Fabrication of SiC particle reinforced composite on aluminium surface by friction stir processing

Science and Technology of Welding and Joining
2008-10 | Journal article
Part of ISSN: 1362-1718
Part of ISSN: 1743-2936
Contributors: E. R. I. Mahmoud; K. Ikeuchi; M. Takahashi
Source: Self-asserted source
Essam R. I.
grade
Preferred source (of 2)‎