Personal information

Activities

Works (32)

Classification models for impact damage of fiber reinforced concrete panels using Tree-based learning algorithms

Structures
2023-07 | Journal article
Contributors: Duc-Kien Thai; Dai-Nhan Le; Quoc Hoan Doan; Thai-Hoan Pham; Dang-Nguyen Nguyen
Source: check_circle
Crossref

Effects of Superplasticizer and Water–Binder Ratio on Mechanical Properties of One-Part Alkali-Activated Geopolymer Concrete

Buildings
2023-07-20 | Journal article
Contributors: Thanh-Tung Pham; Ngoc-Linh Nguyen; Tuan-Trung Nguyen; Trung-Tu Nguyen; Thai-Hoan Pham
Source: check_circle
Crossref

Ước lượng khả năng chịu nén đúng tâm của cột ống thép nhồi bê tông bằng thuật toán máy học

Tạp chí Khoa học Công nghệ Xây dựng (KHCNXD) - ĐHXD
2021-07-17 | Journal article
Part of ISSN: 2734-9268
Part of ISSN: 2615-9058
Source: Self-asserted source
Thai-Hoan Pham

Local damage of the RC tunnels under ballistic missile impact investigated by finite element simulations

Structures
2021-06 | Journal article
Part of ISSN: 2352-0124
Source: Self-asserted source
Thai-Hoan Pham

Prediction of residual strength of FRC columns under blast loading using the FEM method and regression approach

Construction and Building Materials
2021-03 | Journal article
Part of ISSN: 0950-0618
Source: Self-asserted source
Thai-Hoan Pham

Mechanical properties of constituent phases in structural steels and heat-affected zones investigated by statistical nanoindentation analysis

Construction and Building Materials
2021-01 | Journal article
Part of ISSN: 0950-0618
Source: Self-asserted source
Thai-Hoan Pham

Safety assessment of an underground tunnel subjected to missile impact using numerical simulations

Computers and Concrete
2021-01-25 | Journal article
Source: Self-asserted source
Thai-Hoan Pham

Microstructural characteristics of ultra-high performance concrete by grid nanoindentation and statistical analysis

Journal of Science and Technology in Civil Engineering (STCE) - NUCE
2021-01-22 | Journal article
Part of ISSN: 2734-9489
Part of ISSN: 1859-2996
Source: Self-asserted source
Thai-Hoan Pham

Behavior of composite CFST beam-concrete column joints

Steel and Composite Structures
2020 | Journal article
Source: Self-asserted source
Thai-Hoan Pham

Effect of Indentation Strain Rate on Plastic Properties in SS400 Steel Weld Zone

Lecture Notes in Civil Engineering
2020 | Book chapter
Part of ISBN: 9789811551437
Part of ISBN: 9789811551444
Part of ISSN: 2366-2557
Part of ISSN: 2366-2565
Source: Self-asserted source
Thai-Hoan Pham

Nghiên cứu xác định vị trí tối ưu của sườn tăng cường dọc của dầm cầu thép chịu uốn

Tạp chí Khoa học Công nghệ Xây dựng (KHCNXD) - ĐHXD
2020-09-29 | Journal article
Part of ISSN: 2734-9268
Part of ISSN: 2615-9058
Source: Self-asserted source
Thai-Hoan Pham

Experimental study on dynamic nanoindentation on structural weld zone

IOP Conference Series: Materials Science and Engineering
2020-07-10 | Journal article
Part of ISSN: 1757-899X
Source: Self-asserted source
Thai-Hoan Pham

Statistical analysis of yield strength spectrum from nanoindentation for identification of constituent phases in steel

IOP Conference Series: Materials Science and Engineering
2020-07-10 | Journal article
Part of ISSN: 1757-899X
Source: Self-asserted source
Thai-Hoan Pham

Khảo sát ảnh hưởng của mô hình hóa sàn lõi rỗng sử dụng phần mềm ETABS tới phản ứng động học của nhà nhiều tầng

Tạp chí Khoa học Công nghệ Xây dựng (KHCNXD) - ĐHXD
2020-03-17 | Journal article
Part of ISSN: 2734-9268
Part of ISSN: 2615-9058
Source: Self-asserted source
Thai-Hoan Pham

Damage assessment of reinforced concrete columns retrofitted by steel jacket under blast loading

The Structural Design of Tall and Special Buildings
2019-11-05 | Journal article
Part of ISSN: 1541-7794
Part of ISSN: 1541-7808
Source: Self-asserted source
Thai-Hoan Pham
grade
Preferred source (of 2)‎

Strain rate-dependent behaviors of mechanical properties of structural steel investigated using indentation and finite element analysis

Mechanics of Materials
2019-10 | Journal article
Contributors: Ngoc-Vinh Nguyen; Thai-Hoan Pham; Seung-Eock Kim
Source: check_circle
Crossref

Nghiên cứu khả năng chịu uốn của ống tròn hai lớp thép nhồi bê tông có liên kết mối nối bằng mô phỏng phần tử hữu hạn

Tạp chí Khoa học Công nghệ Xây dựng (KHCNXD) - ĐHXD
2019-09-23 | Journal article
Part of ISSN: 2615-9058
Part of ISSN: 2615-9058
Source: Self-asserted source
Thai-Hoan Pham

Indentation for investigation of strain rate effect on mechanical properties in structural steel weld zone

Journal of Science and Technology in Civil Engineering (STCE) - NUCE
2019-08-31 | Journal article
Part of ISSN: 1859-2996
Part of ISSN: 1859-2996
Source: Self-asserted source
Thai-Hoan Pham

Microstructure and strain rate sensitivity behavior of SM490 structural steel weld zone investigated using indentation

Construction and Building Materials
2019-05 | Journal article
Part of ISSN: 0950-0618
Source: Self-asserted source
Thai-Hoan Pham

Strain rate sensitivity behavior of a structural steel during low-cycle fatigue investigated using indentation

Materials Science and Engineering: A
2019-01 | Journal article
Contributors: Ngoc-Vinh Nguyen; Thai-Hoan Pham; Seung-Eock Kim
Source: check_circle
Crossref

Evaluation of ultimate bending moment of circular concrete–filled double skin steel tubes using finite element analysis

Journal of Science and Technology in Civil Engineering (STCE) - NUCE
2019-01-31 | Journal article
Part of ISSN: 1859-2996
Part of ISSN: 1859-2996
Source: Self-asserted source
Thai-Hoan Pham

Shear resistance of ultra-high-performance concrete reinforced with hybrid steel fiber subjected to impact loading

Journal of Science and Technology in Civil Engineering (STCE) - NUCE
2019-01-31 | Journal article
Part of ISSN: 1859-2996
Part of ISSN: 1859-2996
Source: Self-asserted source
Thai-Hoan Pham

Characterization of strain rate effects on the plastic properties of structural steel using nanoindentation

Construction and Building Materials
2018-02 | Journal article
Part of ISSN: 0950-0618
Source: Self-asserted source
Thai-Hoan Pham

Identification of the plastic properties of structural steel using spherical indentation

Materials Science and Engineering: A
2018-01 | Journal article
Part of ISSN: 0921-5093
Source: Self-asserted source
Thai-Hoan Pham

Characteristics of microstructural phases relevant to the mechanical properties in structural steel weld zone studied by using indentation

Construction and Building Materials
2017-11 | Journal article
Contributors: Thai-Hoan Pham; Seung-Eock Kim
Source: check_circle
Crossref

Determination of equi-biaxial residual stress and plastic properties in structural steel using instrumented indentation

Materials Science and Engineering: A
2017-03 | Journal article
Contributors: Thai-Hoan Pham; Seung-Eock Kim
Source: Self-asserted source
Thai-Hoan Pham via Crossref Metadata Search

Microstructure evolution and mechanical properties changes in the weld zone of a structural steel during low-cycle fatigue studied using instrumented indentation testing

International Journal of Mechanical Sciences
2016-08 | Journal article
Contributors: Thai-Hoan Pham; Seung-Eock Kim
Source: Self-asserted source
Thai-Hoan Pham via Crossref Metadata Search

Determination of mechanical properties in SM490 steel weld zone using nanoindentation and FE analysis

Journal of Constructional Steel Research
2015-11 | Journal article
Contributors: Thai-Hoan Pham; Seung-Eock Kim
Source: Self-asserted source
Thai-Hoan Pham via Crossref Metadata Search

Instrumented indentation testing and FE analysis for investigation of mechanical properties in structural steel weld zone

International Journal of Mechanical Sciences
2015-11 | Journal article
Contributors: Jung J. Kim; Thai-Hoan Pham; Seung-Eock Kim
Source: Self-asserted source
Thai-Hoan Pham via Crossref Metadata Search

Nanoindentation for investigation of microstructural compositions in SM490 steel weld zone

Journal of Constructional Steel Research
2015-07 | Journal article
Contributors: Thai-Hoan Pham; Seung-Eock Kim
Source: Self-asserted source
Thai-Hoan Pham via Crossref Metadata Search

Estimating constitutive equation of structural steel using indentation

International Journal of Mechanical Sciences
2015-01 | Journal article
Contributors: Thai-Hoan Pham; Jung J. Kim; Seung-Eock Kim
Source: Self-asserted source
Thai-Hoan Pham via Crossref Metadata Search

Estimation of microstructural compositions in the weld zone of structural steel using nanoindentation

Journal of Constructional Steel Research
2014-08 | Journal article
Contributors: Thai-Hoan Pham; Jung J. Kim; Seung-Eock Kim
Source: Self-asserted source
Thai-Hoan Pham via Crossref Metadata Search

Peer review (4 reviews for 4 publications/grants)

Review activity for Construction & building materials. (1)
Review activity for Probabilistic engineering mechanics. (1)
Review activity for Structures. (1)
Review activity for The Journal of constructional steel research. (1)