Personal information

Verified email domains

Activities

Employment (1)

Oak Ridge National Laboratory: Oak Ridge, TN, US

2017 to present | Staff Scientist (Energy Science and Technology Directorate)
Employment
Source: Self-asserted source
Corson Cramer

Education and qualifications (1)

Colorado State University: Fort Collins, CO, US

2014 to 2017 | PhD (Mechanical Engineering)
Education
Source: Self-asserted source
Corson Cramer

Works (33)

Apparent fracture toughness estimation of additively manufactured alumina from as‐printed chevron‐notched test specimens

Journal of the American Ceramic Society
2025-04 | Journal article
Contributors: Patrick L. Snarr; Kris V. Jones; Emily F. Ghezawi; Andrew A. Wereszczak; Corson L. Cramer
Source: check_circle
Crossref

Ability of x‐ray computed tomography to resolve critical flaw size in laser‐based, paste stereolithography ceramic printing of alumina

International Journal of Ceramic Engineering & Science
2024-09 | Journal article
Contributors: Corson L. Cramer; Andrés Márquez Rossy; Ryan R. Dehoff; Andrew T. Nelson
Source: check_circle
Crossref

Material selection and manufacturing for high‐temperature heat exchangers: Review of state‐of‐the‐art development, opportunities, and challenges

International Journal of Ceramic Engineering & Science
2024-09 | Journal article
Contributors: Corson L. Cramer; Edgar Lara‐Curzio; Amy M. Elliott; Trevor G. Aguirre; Bola Yoon; Brian A. Fricke; Vivek Rao; Prashant Jain; Kashif Nawaz
Source: check_circle
Crossref

Environmental stability of additively manufactured siliconized silicon carbide for applications in hybrid energy systems

Journal of the American Ceramic Society
2023-10 | Journal article
Contributors: Bola Yoon; Dylan Richardson; Saad A. Jajja; Corson L. Cramer; Michael J. Lance; Kashif Nawaz; Edgar Lara‐Curzio
Source: check_circle
Crossref

Hardness Measurements and Interface Behavior of SiC-B4C-Si Multiple Phase Particulate Composites Made with Melt Infiltration and Additive Manufacturing

Journal of Composites Science
2023-04-20 | Journal article
Contributors: Corson L. Cramer; Ercan Cakmak; Kinga A. Unocic
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of W and C addition on the microstructure and phase composition of W–ZrC composites prepared by using Zr2Cu alloy and variant reactant compositions

Open Ceramics
2022-12 | Journal article
Contributors: Rina K. Mudanyi; Corson L. Cramer; Amy M. Elliott; Dhananjay Kumar
Source: check_circle
Crossref

Additive Manufacturing of C/C-SiC Ceramic Matrix Composites by Automated Fiber Placement of Continuous Fiber Tow in Polymer with Pyrolysis and Reactive Silicon Melt Infiltration

Journal of Composites Science
2022-11-23 | Journal article
Contributors: Corson L. Cramer; Bola Yoon; Michael J. Lance; Ercan Cakmak; Quinn A. Campbell; David J. Mitchell
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Processing and 3D printing of SiCN polymer‐derived ceramics

International Journal of Applied Ceramic Technology
2022-03 | Journal article
Contributors: Mohammadreza Mahmoudi; Sungjin Kim; Arif M. Arifuzzaman; Tomonori Saito; Corson L. Cramer; Majid Minary‐Jolandan
Source: check_circle
Crossref

Testing and Modeling of Functionally Graded Aluminum‐Doped Zinc Oxide Using Spark Plasma Sintering and Discrete Powder Layers of Varying Composition

physica status solidi (a)
2022-01 | Journal article
Contributors: Corson L. Cramer; Hsin Wang; Michael J. Lance; Artem A. Trofimov; Ercan Cakmak; Zhi-He Jin
Source: check_circle
Crossref

Accuracy of stereolithography printed alumina with digital light processing

Open Ceramics
2021-12 | Journal article
Contributors: Corson L. Cramer; Jackson K. Wilt; Quinn A. Campbell; Lu Han; Tomonori Saito; Andrew T. Nelson
Source: check_circle
Crossref

Alumina‐based filters made via binder jet 3D printing of alumina powder, colloidal silica infiltration, and sintering

International Journal of Applied Ceramic Technology
2021-11 | Journal article
Contributors: Corson L. Cramer; Beth L. Armstrong; Artem A. Trofimov; Peter L. Wang; Derek H. Siddel; Hsin Wang; Ercan Cakmak; James W. Klett; Amy M. Elliott
Source: check_circle
Crossref

Properties of SiC‐Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration

Journal of the American Ceramic Society
2021-11 | Journal article
Contributors: Corson L. Cramer; Amy M. Elliott; Edgar Lara‐Curzio; Alexis Flores‐Betancourt; Michael J. Lance; Lu Han; Jesse Blacker; Artem A. Trofimov; Hsin Wang; Ercan Cakmak et al.
Source: check_circle
Crossref

A Lamination Model for Pressure-Assisted Sintering of Multilayered Porous Structures

Journal of Composites Science
2021-02-09 | Journal article
Contributors: Zhi-He Jin; Corson L. Cramer
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Processing and properties of SiC composites made via binder jet 3D printing and infiltration and pyrolysis of preceramic polymer

International Journal of Ceramic Engineering & Science
2020-11 | Journal article
Contributors: Corson L. Cramer; Herb Armstrong; Alexis Flores‐Betancourt; Lu Han; Amy M. Elliott; Edgar Lara‐Curzio; Tomonori Saito; Kashif Nawaz
Source: check_circle
Crossref

In-situ metal binder-phase formation to make WC-FeNi Cermets with spark plasma sintering from WC, Fe, Ni, and carbon powders

International Journal of Refractory Metals and Hard Materials
2020-04 | Journal article
Part of ISSN: 0263-4368
Source: Self-asserted source
Corson Cramer

Reaction-bond composite synthesis of SiC-TiB2 by spark plasma sintering/field-assisted sintering technology (SPS/FAST)

Journal of the European Ceramic Society
2020-04 | Journal article
Contributors: Corson L. Cramer; Jacob W. McMurray; Michael J. Lance; Richard A. Lowden
Source: check_circle
Crossref

Binder jet printed WC infiltrated with pre-made melt of WC and Co

International Journal of Refractory Metals and Hard Materials
2020-02 | Journal article
Part of ISSN: 0263-4368
Source: Self-asserted source
Corson Cramer

Binder jet additive manufacturing method to fabricate near net shape crack-free highly dense Fe-6.5 wt.% Si soft magnets

Heliyon
2019-11 | Journal article
Part of ISSN: 2405-8440
Source: Self-asserted source
Corson Cramer

Microstructure evolution during near-net-shape fabrication of NixAly-TiC cermets through binder jet additive manufacturing and pressureless melt infiltration

International Journal of Refractory Metals and Hard Materials
2019-11 | Journal article
Part of ISSN: 0263-4368
Source: Self-asserted source
Corson Cramer

Processing of complex-shaped collimators made via binder jet additive manufacturing of B4C and pressureless melt infiltration of Al

Materials & Design
2019-10 | Journal article
Part of ISSN: 0264-1275
Source: Self-asserted source
Corson Cramer

Shape retention and infiltration height in complex WC-Co parts made via binder jet of WC with subsequent Co melt infiltration

Additive Manufacturing
2019-10 | Journal article
Part of ISSN: 2214-8604
Source: Self-asserted source
Corson Cramer

Lightweight TiC–(Fe–Al) ceramic–metal composites made in situ by pressureless melt infiltration

Journal of Materials Science
2019-10-01 | Journal article
Contributors: Corson L. Cramer; Makayla S. Edwards; Jacob W. McMurray; Amy M. Elliott; Richard A. Lowden
Source: check_circle
Crossref

Evaluation of Binder Jetting and Chemical Vapor Infiltration as a Production Method for Silicon Carbide Parts for Nuclear Applications

2019-09-27 | Report
Contributors: Amy Elliott; Corson Cramer; Kurt Terrani
Source: check_circle
Crossref

Lithography-based Ceramics Manufacturing Technologies

2019-09-01 | Report
Contributors: Corson Cramer; Alicia Raftery; Andrew Nelson
Source: check_circle
Crossref

Highly dense, inexpensive composites via melt infiltration of Ni into WC/Fe preforms

International Journal of Refractory Metals and Hard Materials
2019-08 | Journal article
Part of ISSN: 0263-4368
Source: Self-asserted source
Corson Cramer

Infiltration studies of additive manufacture of WC with Co using binder jetting and pressureless melt method

Additive Manufacturing
2019-08 | Journal article
Part of ISSN: 2214-8604
Source: Self-asserted source
Corson Cramer

Effects of the addition of boron nitride nanoplate on the fracture toughness, flexural strength, and Weibull Distribution of hydroxyapatite composites prepared by spark plasma sintering

Journal of the Mechanical Behavior of Biomedical Materials
2019-05 | Journal article
Part of ISSN: 1751-6161
Source: Self-asserted source
Corson Cramer

Prediction of continuous porosity gradients in ceramics using ZnO as a model material

Journal of the American Ceramic Society
2019-02 | Journal article
Contributors: Corson L. Cramer; Trevor G. Aguirre; Troy B. Holland; Kaka Ma
Source: check_circle
Crossref

Additive manufacturing of ceramic nanopowder by direct coagulation printing

Additive Manufacturing
2018-10 | Journal article
Contributors: Tucker J. Hensen; Trevor G. Aguirre; Corson L. Cramer; Austin S. Wand; Kaka Ma; David A. Prawel; John D. Williams; Troy B. Holland
Source: check_circle
Crossref

Performance of Functionally Graded Thermoelectric Materials and Devices: A Review

Journal of Electronic Materials
2018-09 | Journal article
Part of ISSN: 0361-5235
Part of ISSN: 1543-186X
Source: Self-asserted source
Corson Cramer

Thermoelectric Properties and Morphology of Si/SiC Thin-Film Multilayers Grown by Ion Beam Sputtering

Coatings
2018-03 | Journal article
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Techniques for Mitigating Thermal Fatigue Degradation, Controlling Efficiency, and Extending Lifetime in a ZnO Thermoelectric Using Grain Size Gradient FGMs

Journal of Electronic Materials
2018-01 | Journal article
Part of ISSN: 0361-5235
Part of ISSN: 1543-186X
Source: Self-asserted source
Corson Cramer

Molybdenum oxide and molybdenum oxide-nitride back contacts for CdTe solar cells

Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
2015-07 | Journal article
Part of ISSN: 0734-2101
Part of ISSN: 1520-8559
Source: Self-asserted source
Corson Cramer

Peer review (7 reviews for 6 publications/grants)

Review activity for Additive manufacturing. (1)
Review activity for Composites. (1)
Review activity for Journal of electronic materials. (1)
Review activity for Journal of materials science. (2)
Review activity for Journal of the European Ceramic Society. (1)
Review activity for Results in materials. (1)