Personal information

Verified email addresses

Micro machining
South Korea

Activities

Employment (3)

Soongsil University: Seoul, KR

2009-03-01 to present | Professor (Department of Mechanical Engineering)
Employment
Source: Self-asserted source
Bo Hyun Kim

Andong National University: Andong, KR

2007-03-01 to 2009-08-31 | Prof. (School of Mechanical Engineering)
Employment
Source: Self-asserted source
Bo Hyun Kim

Seoul National University: Seoul, KR

2005-03-01 to 2007-02-28 | Researcher / Post Doc. (School of Mechanical and Aerospace Engineering)
Employment
Source: Self-asserted source
Bo Hyun Kim

Education and qualifications (1)

Seoul National University: Seoul, KR

1999-03-01 to 2005-02-28 | Ph.D. (School of Mechanical and Aerospace Engineering)
Education
Source: Self-asserted source
Bo Hyun Kim

Works (49)

Microneedle patch casting using a micromachined carbon master for enhanced drug delivery

Scientific Reports
2024-08-20 | Journal article
Part of ISSN: 2045-2322
Contributors: Hye Jin Choi; Asad Ullah; Mi Jin Jang; Ui Seok Lee; Min Chul Shin; Sang Hyun An; Dongseon Kim; Bo Hyun Kim; Gyu Man Kim
Source: Self-asserted source
Bo Hyun Kim

Machining Characteristics of Micro EDM of Silicon Carbide

Journal of the Korean Society for Precision Engineering
2024-02-01 | Journal article
Contributors: Ju Hyeon Lee; Chan Young Yang; Bo Hyun Kim
Source: check_circle
Crossref

Study on Micro Grooving of Tungsten Carbide Using Disk Tool

Journal of the Korean Society for Precision Engineering
2024-02-01 | Journal article
Contributors: Min Ki Kim; Chan Young Yang; Dae Bo Sim; Ji Hyo Lee; Bo Hyun Kim
Source: check_circle
Crossref

Fabrication of Micro Carbon Mold for Glass-Based Micro Hole Array

Micromachines
2024-01-27 | Journal article
Contributors: Ui Seok Lee; Dae Bo Sim; Ji Hyo Lee; Bo Hyun Kim
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Fabrication Methods for Microscale 3D Structures on Silicon Carbide

International Journal of Precision Engineering and Manufacturing
2022-12 | Journal article
Contributors: Younghak Cho; Jihong Hwang; Min-Soo Park; Bo Hyun Kim
Source: check_circle
Crossref

Microfluidic Chip Fabrication of Fused Silica Using Microgrinding

Micromachines
2022-12-30 | Journal article
Contributors: Pyeong An Lee; Ui Seok Lee; Dae Bo Sim; Bo Hyun Kim
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A Study of Microdrilling of Fused Silica Using EDMed PCD Tools

Applied Sciences
2022-11-03 | Journal article
Contributors: Pyeong An Lee; Bo Hyun Kim
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Machining of V-Shaped Microchannel on Cemented Carbide Using PCD Tools

Journal of the Korean Society for Precision Engineering
2022-10-01 | Journal article
Contributors: Dae Bo Sim; Chan Young Yang; Bo Hyun Kim
Source: check_circle
Crossref

Experimental Study on Micro-Grinding of Ceramics for Micro-Structuring

Applied Sciences
2021-08-31 | Journal article
Contributors: Yung Na; Ui Seok Lee; Bo Hyun Kim
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Micro Drilling of Single Crystal SiC Using Polycrystalline Diamond Tool

Journal of the Korean Society for Precision Engineering
2021-07-01 | Journal article
Contributors: Ui Seok Lee; Chan Young Yang; Ju Hyeon Lee; Bo Hyun Kim
Source: check_circle
Crossref

Rapid manufacturing of large diameter Cu micropillars by micro-electrical discharge machining and focused ion beam

The International Journal of Advanced Manufacturing Technology
2021-03-01 | Journal article
Contributors: Ui Seok Lee; Bo Hyun Kim; Sang-Min Kim; Chung-Seog Oh
Source: check_circle
Crossref

An Analytical Model for Grinding Force Prediction in Ultra-Precision Machining of WC with PCD Micro Grinding Tool

International Journal of Precision Engineering and Manufacturing-Green Technology
2020-11 | Journal article
Part of ISSN: 2288-6206
Part of ISSN: 2198-0810
Contributors: Sangjin Maeng; Pyeong An Lee; Bo Hyun Kim; Sangkee Min
Source: Self-asserted source
Bo Hyun Kim

Micro Pin Fabrication of Tungsten Carbide Using Polycrystalline Diamond

Journal of the Korean Society for Precision Engineering
2020-11-01 | Journal article
Contributors: Joo A Park; Ui Seok Lee; Bo Hyun Kim
Source: check_circle
Crossref

Superhydrophobic Polymer Surface with Hierarchical Patterns Fabricated in Hot Imprinting Process

International Journal of Precision Engineering and Manufacturing-Green Technology
2020-03 | Journal article
Part of ISSN: 2288-6206
Part of ISSN: 2198-0810
Contributors: In Yong Moon; Bo Hyun Kim; Ho Won Lee; Young-Seok Oh; Ji Hoon Kim; Seong-Hoon Kang
Source: Self-asserted source
Bo Hyun Kim

Nanoscale indentation and scratching tests of single crystal sapphire using molecular dynamics simulation

Computational Materials Science
2019-12 | Journal article
Contributors: Woo Kyun Kim; Dalei Xi; Bo Hyun Kim
Source: check_circle
Crossref

Microchannel Fabrication on Glass Materials for Microfluidic Devices

International Journal of Precision Engineering and Manufacturing
2019-03-12 | Journal article
Contributors: Jihong Hwang; Young Hak Cho; Min Soo Park; Bo Hyun Kim
Source: check_circle
Crossref

Effect of Vibration and Machining Area in the Fabrication of Micro Tool by Reverse EDM

Journal of the Korean Society for Precision Engineering
2019-02-01 | Journal article
Contributors: Yung Na; Bo Hyun Kim
Source: check_circle
Crossref

Fabrication of Micro Column Array by Micro EDM Using Eccentric Tool Electrodes

Journal of the Korean Society for Precision Engineering
2018-03-01 | Journal article
Contributors: Pyeong An Lee; Sun Keel Kim; Bo Hyun Kim
Source: check_circle
Crossref

The State of the Art in Electrochemical Micro Machining Technologies

Journal of the Korean Society for Precision Engineering
2018-03-01 | Journal article
Contributors: Pyeong An Lee; Eunseok Nam; Bo Hyun Kim
Source: check_circle
Crossref

A molecular dynamics study on atomistic mechanisms of nano-scale cutting process of sapphire

Journal of Mechanical Science and Technology
2017-09 | Journal article
Part of ISSN: 1738-494X
Part of ISSN: 1976-3824
Contributors: Woo Kyun Kim; Bo Hyun Kim
Source: Self-asserted source
Bo Hyun Kim

Surface polishing of quartz-based microfluidic channels using CO2 laser

Microfluidics and Nanofluidics
2016-06 | Journal article
Contributors: Seungman Jung; Pyeong An Lee; Bo Hyun Kim
Source: check_circle
Crossref

Influence of a micropatterned insert on characteristics of the tool–workpiece interface in a hard turning process

Journal of Materials Processing Technology
2016-03 | Journal article
Part of ISSN: 0924-0136
Contributors: Dong Min Kim; Ineon Lee; Sun Keel Kim; Bo Hyun Kim; Hyung Wook Park
Source: Self-asserted source
Bo Hyun Kim

Micro/nano-hybrid lens for enhancing light extraction using micro-milling and anodic aluminium oxide (AAO)

Journal of Micromechanics and Microengineering
2016-01-01 | Journal article
Part of ISSN: 0960-1317
Part of ISSN: 1361-6439
Contributors: Shin Hyeong Kim; Min Gu Kim; Jeong Jin Kang; Pyeong An Lee; Bo Hyun Kim; Young Hak Cho
Source: Self-asserted source
Bo Hyun Kim

Effect of low frequency vibration on micro EDM drilling

International Journal of Precision Engineering and Manufacturing
2015-12 | Journal article
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Contributors: Pyeong An Lee; Younghan Kim; Bo Hyun Kim
Source: Self-asserted source
Bo Hyun Kim

Finite element modeling of hard turning process via a micro-textured tool

The International Journal of Advanced Manufacturing Technology
2015-06 | Journal article
Part of ISSN: 0268-3768
Part of ISSN: 1433-3015
Contributors: Dong Min Kim; Vivek Bajpai; Bo Hyun Kim; Hyung Wook Park
Source: Self-asserted source
Bo Hyun Kim

Experimental investigation of ECDM for fabricating micro structures of quartz

International Journal of Precision Engineering and Manufacturing
2015-01 | Journal article
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Contributors: Khac-Ha Nguyen; Pyeong An Lee; Bo Hyun Kim
Source: Self-asserted source
Bo Hyun Kim

Facile fabrication of superhydrophobic poly(methyl methacrylate) substrates using ultrasonic imprinting

Journal of Micromechanics and Microengineering
2013-05-01 | Journal article
Part of ISSN: 0960-1317
Part of ISSN: 1361-6439
Contributors: Young Hak Cho; Young Soo Seo; In Yong Moon; Bo Hyun Kim; Keun Park
Source: Self-asserted source
Bo Hyun Kim

Analysis of the electrochemical behaviors of WC–Co alloy for micro ECM

Journal of Materials Processing Technology
2013-04 | Journal article
Part of ISSN: 0924-0136
Contributors: Se Hwan Choi; Bo Hyun Kim; Hong Shik Shin; Do Kwan Chung; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Hybrid micromachining of glass using ECDM and micro grinding

International Journal of Precision Engineering and Manufacturing
2013-01 | Journal article
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Contributors: Xuan Doan Cao; Bo Hyun Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Wire electrical discharge machining of carbon nanofiber mats for field emission

International Journal of Precision Engineering and Manufacturing
2012-04 | Journal article
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Contributors: Jin Woo Park; Do Kwan Chung; Bo Hyun Kim; Jong Girl Ok; Wal Jun Kim; Yong Hyup Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

High frequency micro wire EDM for electrolytic corrosion prevention

International Journal of Precision Engineering and Manufacturing
2011-12 | Journal article
Part of ISSN: 1229-8557
Part of ISSN: 2005-4602
Contributors: Do Kwan Chung; Hong Shik Shin; Bo Hyun Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Recent researches in micro electrical machining

International Journal of Precision Engineering and Manufacturing
2011-04 | Journal article
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Contributors: Do Kwan Chung; Hong Shik Shin; Min Soo Park; Bo Hyun Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Surface texturing by micro ECM for friction reduction

International Journal of Precision Engineering and Manufacturing
2010-10 | Journal article
Part of ISSN: 1229-8557
Part of ISSN: 2005-4602
Contributors: Jung Won Byun; Hong Shik Shin; Min Ho Kwon; Bo Hyun Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

FABRICATION OF MICRO PROBE-TYPE ELECTRODES FOR MICROELECTRO-CHEMICAL MACHINING USING MICROFABRICATION

International Journal of Modern Physics B
2010-06-30 | Journal article
Part of ISSN: 0217-9792
Part of ISSN: 1793-6578
Contributors: W. B. PARK; J. H. CHOI; C. W. PARK; G. M. KIM; H. S. SHIN; C. N. CHU; B. H. KIM
Source: Self-asserted source
Bo Hyun Kim

Electrochemical etching of stainless steel through laser masking

Journal of Micromechanics and Microengineering
2010-05-01 | Journal article
Part of ISSN: 0960-1317
Part of ISSN: 1361-6439
Contributors: Hong Shik Shin; Do Kwan Chung; Min Soo Park; Bo Hyun Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Hybrid micromachining using a nanosecond pulsed laser and micro EDM

Journal of Micromechanics and Microengineering
2010-01-01 | Journal article
Part of ISSN: 0960-1317
Part of ISSN: 1361-6439
Contributors: Sanha Kim; Bo Hyun Kim; Do Kwan Chung; Hong Shik Shin; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Micro electrochemical machining for complex internal micro features

CIRP Annals
2009 | Journal article
Part of ISSN: 0007-8506
Contributors: Chan Hee Jo; Bo Hyun Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Micro-structuring of glass with features less than 100μm by electrochemical discharge machining

Precision Engineering
2009-10 | Journal article
Part of ISSN: 0141-6359
Contributors: Xuan Doan Cao; Bo Hyun Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Surface finishing of micro-EDM holes using deionized water

Journal of Micromechanics and Microengineering
2009-04-01 | Journal article
Part of ISSN: 0960-1317
Part of ISSN: 1361-6439
Contributors: Do Kwan Chung; Hong Shik Shin; Bo Hyun Kim; Min Soo Park; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Analysis of the side gap resulting from micro electrochemical machining with a tungsten wire and ultrashort voltage pulses

Journal of Micromechanics and Microengineering
2008-07-01 | Journal article
Part of ISSN: 0960-1317
Part of ISSN: 1361-6439
Contributors: Hong Shik Shin; Bo Hyun Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Characteristics of MEDM for micro-holes with respect to circuit elements

Journal of Mechanical Science and Technology
2008-02 | Journal article
Part of ISSN: 1738-494X
Part of ISSN: 1976-3824
Contributors: Pil Joo Cho; Bo Hyun Kim; Deok Ki Choi; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Electrical discharge machining of carbon nanomaterials in air: machining characteristics and the advanced field emission applications

Journal of Micromechanics and Microengineering
2008-02-01 | Journal article
Part of ISSN: 0960-1317
Part of ISSN: 1361-6439
Contributors: Jong Girl Ok; Bo Hyun Kim; Do Kwan Chung; Woo Yong Sung; Seung Min Lee; Se Won Lee; Wal Jun Kim; Jin Woo Park; Chong Nam Chu; Yong Hyup Kim
Source: Self-asserted source
Bo Hyun Kim

Electrical Discharge Machining of Carbon Nanofiber for Uniform Field Emission

CIRP Annals
2007 | Journal article
Part of ISSN: 0007-8506
Contributors: B.H. Kim; J.G. Ok; Y.H. Kim; C.N. Chu
Source: Self-asserted source
Bo Hyun Kim

Micro electrical discharge milling using deionized water as a dielectric fluid

Journal of Micromechanics and Microengineering
2007-05-01 | Journal article
Part of ISSN: 0960-1317
Part of ISSN: 1361-6439
Contributors: Do Kwan Chung; Bo Hyun Kim; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Uniformity enhancement of carbon nanofiber emitters via electrical discharge machining

Applied Physics Letters
2007-01-15 | Journal article
Part of ISSN: 0003-6951
Part of ISSN: 1077-3118
Contributors: Jong Girl Ok; Bo Hyun Kim; Woo Yong Sung; Chong Nam Chu; Yong Hyup Kim
Source: Self-asserted source
Bo Hyun Kim

The Effects of Tool Electrode Size on Characteristics of Micro Electrochemical Machining

CIRP Annals
2006 | Journal article
Part of ISSN: 0007-8506
Contributors: B.J. Park; B.H. Kim; C.N. Chu
Source: Self-asserted source
Bo Hyun Kim

Fabrication of multiple electrodes by reverse EDM and their application in micro ECM

Journal of Micromechanics and Microengineering
2006-04-01 | Journal article
Part of ISSN: 0960-1317
Part of ISSN: 1361-6439
Contributors: Bo Hyun Kim; Byung Jin Park; Chong Nam Chu
Source: Self-asserted source
Bo Hyun Kim

Micro Electrochemical Machining of 3D Micro Structure Using Dilute Sulfuric Acid

CIRP Annals
2005 | Journal article
Part of ISSN: 0007-8506
Contributors: B.H. Kim; C.W. Na; Y.S. Lee; D.K. Choi; C.N. Chu
Source: Self-asserted source
Bo Hyun Kim

Micro electrochemical milling

Journal of Micromechanics and Microengineering
2005 | Journal article
Contributors: Kim, BH; Ryu, SH; Choi, DK; Chu, CN
Source: check_circle
Web of Science Researcher Profile Sync

Peer review (14 reviews for 3 publications/grants)

Review activity for International journal of precision engineering and manufacturing (10)
Review activity for International journal of precision engineering and manufacturing (Online) (1)
Review activity for International Journal of the Korean Society of Precision Engineering. (3)