Personal information

Emails & domains

Verified email addresses

Verified email domains

Other IDs

SciProfiles: 1280967

Activities

Collapse all

Employment (2)

University of Science and Technology: Daejeon, KR

2013-09-01 to present | Professor (Department of Nano-mechatronics)
Employment
Source: Self-asserted source
Jeong Seok Oh

Korea Institute of Machinery and Materials: Daejeon, KR

2005-11-01 to present | Principal Researcher (Department of Ultra-Precision Machines and Systems)
Employment
Source: Self-asserted source
Jeong Seok Oh

Education and qualifications (3)

Korea Advanced Institute of Science and Technology: Daejeon, KR

2001-09-01 to 2005-08-19 | PhD (Mechanical Engineering)
Education
Source: Self-asserted source
Jeong Seok Oh

Korea Advanced Institute of Science and Technology: Daejeon, KR

1993-03-01 to 1995-02-17 | Master (Precision Engineering)
Education
Source: Self-asserted source
Jeong Seok Oh

Seoul National University: Seoul, KR

1989-03-01 to 1993-02-26 | Bachelor (Mechanical Engineering)
Education
Source: Self-asserted source
Jeong Seok Oh

Works (32)

Open-Air Testing of Dual-Comb Time-of-Flight Measurement

Sensors
2023-11-03 | Journal article
DOI: 10.3390/s23218949
Contributors: Wooram Kim; Jaewon Yang; Jaeyoung Jang; Jeong Seok Oh; Seongheum Han; Seungman Kim; Heesuk Jang; Young-Jin Kim; Seung-Woo Kim
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Improved Self-Calibration of a Multilateration System Based on Absolute Distance Measurement

Sensors
2020-12-18 | Journal article
DOI: 10.3390/s20247288
Part of ISSN: 1424-8220
Source: Self-asserted source
Jeong Seok Oh
grade
Preferred source (of 3)‎

Absolute laser ranging by time-of-flight measurement of ultrashort light pulses [Invited]

Journal of the Optical Society of America A
2020-09-01 | Journal article
DOI: 10.1364/josaa.395157
Part of ISSN: 1084-7529
Part of ISSN: 1520-8532
Source: Self-asserted source
Jeong Seok Oh

Multi-objective Optimization of Machine Tool Spindle-Bearing System

International Journal of Precision Engineering and Manufacturing
2020-08-10 | Journal article
DOI: 10.1007/s12541-020-00389-7
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Source: Self-asserted source
Jeong Seok Oh

Measurement of Location Errors in a Horizontal 4-axis Machine Tool using a Touch Trigger Probe

Journal of the Korean Society for Precision Engineering
2019-08-01 | Journal article
DOI: 10.7736/kspe.2019.36.8.745
Part of ISSN: 1225-9071
Part of ISSN: 2287-8769
Source: Self-asserted source
Jeong Seok Oh

Compensation of Sensor Gain Difference in Measuring Straightness Errors Using a Mixed Sequential Two-Probe Method

International Journal of Precision Engineering and Manufacturing
2019-02-22 | Journal article
DOI: 10.1007/s12541-019-00063-7
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Source: Self-asserted source
Jeong Seok Oh

Method for measuring location errors using a touch trigger probe on four-axis machine tools

The International Journal of Advanced Manufacturing Technology
2018-08-16 | Journal article
DOI: 10.1007/s00170-018-2506-8
Part of ISSN: 0268-3768
Part of ISSN: 1433-3015
Source: Self-asserted source
Jeong Seok Oh

3D Coordinate Measurement System Based on Multiple Absolute Distances for Mobile Machining Platform

Journal of the Korean Society of Manufacturing Technology Engineers
2017-12-31 | Journal article
DOI: 10.7735/ksmte.2017.26.6.632
Part of ISSN: 2508-5093
Part of ISSN: 2508-5107
Source: Self-asserted source
Jeong Seok Oh

Implementation and verification of a four-probe motion error measurement system for a large-scale roll lathe used in hybrid manufacturing

Measurement Science and Technology
2017-10-01 | Journal article
DOI: 10.1088/1361-6501/aa7d33
Part of ISSN: 0957-0233
Part of ISSN: 1361-6501
Source: Self-asserted source
Jeong Seok Oh

Development of a web-based simulator for estimating motion errors in linear motion stages

IOP Conference Series: Materials Science and Engineering
2017-08 | Journal article
DOI: 10.1088/1757-899x/227/1/012068
Part of ISSN: 1757-8981
Part of ISSN: 1757-899X
Source: Self-asserted source
Jeong Seok Oh

Precision measurement of Z-slide vertical error motion of an ultra-precision lathe by using three-probe method

International Journal of Precision Engineering and Manufacturing
2017-05 | Journal article
DOI: 10.1007/s12541-017-0078-4
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Source: Self-asserted source
Jeong Seok Oh

A Method of Calculating Motion Error in a Linear Motion Bearing Stage

The Scientific World Journal
2015 | Journal article
DOI: 10.1155/2015/696417
Part of ISSN: 2356-6140
Part of ISSN: 1537-744X
Source: Self-asserted source
Jeong Seok Oh

Comparison of Electromagnetic Force Characteristics and Experiment of Pitching Moment in Permanent Magnet Linear Synchronous Motor According to the Moving Iron Core and Stator Topology

The Transactions of The Korean Institute of Electrical Engineers
2015-12-01 | Journal article
DOI: 10.5370/kiee.2015.64.12.1695
Part of ISSN: 1975-8359
Source: Self-asserted source
Jeong Seok Oh

Influence of Parameter Setting in an Oil Cooler on the Temperature Characteristics of an Ultra-precision Hydrostatic Table

Journal of the Korean Society for Precision Engineering
2015-06-01 | Journal article
DOI: 10.7736/kspe.2015.32.6.571
Part of ISSN: 1225-9071
Source: Self-asserted source
Jeong Seok Oh

Simulation of Motion Accuracy Considering Loads in Linear Motion Units

Journal of the Korean Society for Precision Engineering
2015-05-01 | Journal article
DOI: 10.7736/kspe.2015.32.5.405
Part of ISSN: 1225-9071
Source: Self-asserted source
Jeong Seok Oh

Modelling vibration transmission in the mechanical and control system of a precision machine

CIRP Annals
2014 | Journal article
DOI: 10.1016/j.cirp.2014.03.133
Part of ISSN: 0007-8506
Source: Self-asserted source
Jeong Seok Oh

Precision evaluation of surface form error of a large-scale roll workpiece on a drum roll lathe

Precision Engineering
2014-10 | Journal article
DOI: 10.1016/j.precisioneng.2014.05.001
Part of ISSN: 0141-6359
Source: Self-asserted source
Jeong Seok Oh

Design of Velocity Ripple Controller using Phase Compensation Feedforward Control

Journal of the Korean Society for Precision Engineering
2014-08-01 | Journal article
DOI: 10.7736/kspe.2014.31.8.705
Part of ISSN: 1225-9071
Source: Self-asserted source
Jeong Seok Oh

Performance Evaluation of Hydrostatic Bearing Guided Rotary Table for Large Volume Multi-tasking Vertical Lathe

Journal of the Korean Society for Precision Engineering
2014-07-01 | Journal article
DOI: 10.7736/kspe.2014.31.7.635
Part of ISSN: 1225-9071
Source: Self-asserted source
Jeong Seok Oh

Measuring the Rail Profiles of a Long Hydrostatic Guideway in a Precision Roll Lathe

Key Engineering Materials
2014-05 | Journal article
DOI: 10.4028/www.scientific.net/kem.613.392
Part of ISSN: 1662-9795
Source: Self-asserted source
Jeong Seok Oh

Current Status and Technical Issues of Ultra-precision Machine Tools

Journal of the Korean Society for Precision Engineering
2014-03-01 | Journal article
DOI: 10.7736/kspe.2014.31.3.189
Part of ISSN: 1225-9071
Source: Self-asserted source
Jeong Seok Oh

Analysis of 5-DOF motion errors influenced by the guide rails of an aerostatic linear motion stage

International Journal of Precision Engineering and Manufacturing
2014-02 | Journal article
DOI: 10.1007/s12541-014-0336-7
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Source: Self-asserted source
Jeong Seok Oh

An Ultra-precision Lathe for Large-area Micro-structured Roll Molds

Journal of the Korean Society for Precision Engineering
2013-12-01 | Journal article
DOI: 10.7736/kspe.2013.30.12.1303
Part of ISSN: 1225-9071
Source: Self-asserted source
Jeong Seok Oh

Development of Multi-functional Centerless Grinding System with 600 mm Wide Grinding Wheels

Journal of the Korean Society for Precision Engineering
2013-11-01 | Journal article
DOI: 10.7736/kspe.2013.30.11.1129
Part of ISSN: 1225-9071
Source: Self-asserted source
Jeong Seok Oh

A Study on the Effect of the Sensor Gain Error in the Precision Measurement of Straightness Error Using Mixed Sequential Two-Probe Method

Journal of the Korean Society for Precision Engineering
2013-06-01 | Journal article
DOI: 10.7736/kspe.2013.30.6.607
Part of ISSN: 1225-9071
Source: Self-asserted source
Jeong Seok Oh

Analysis and Measurement of the Dynamic Motions of a Large-Scale Rotating Roll Workpiece

Key Engineering Materials
2012-11 | Journal article
DOI: 10.4028/www.scientific.net/kem.523-524.847
Part of ISSN: 1662-9795
Source: Self-asserted source
Jeong Seok Oh

Precision measurement of rail form error in a closed type hydrostatic guideway

International Journal of Precision Engineering and Manufacturing
2012-10 | Journal article
DOI: 10.1007/s12541-012-0243-8
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Source: Self-asserted source
Jeong Seok Oh

Spindle error motion measurement of a large precision roll lathe

International Journal of Precision Engineering and Manufacturing
2012-06 | Journal article
DOI: 10.1007/s12541-012-0112-5
Part of ISSN: 2234-7593
Part of ISSN: 2005-4602
Source: Self-asserted source
Jeong Seok Oh

Precision measurement of carriage slide motion error of a drum roll lathe

Precision Engineering
2012-04 | Journal article
DOI: 10.1016/j.precisioneng.2011.10.005
Part of ISSN: 0141-6359
Source: Self-asserted source
Jeong Seok Oh

Four-beam Interference Optical System for Laser Micro- structuring Using Picosecond Laser

Journal of the Optical Society of Korea
2009-03-25 | Journal article
DOI: 10.3807/JOSK.2009.13.1.075
Source: Self-asserted source
Jeong Seok Oh

Measuring and compensating for 5-DOF parasitic motion errors in translation stages using Twyman–Green interferometry

International Journal of Machine Tools and Manufacture
2006-11 | Journal article
DOI: 10.1016/j.ijmachtools.2005.12.002
Part of ISSN: 0890-6955
Source: Self-asserted source
Jeong Seok Oh

Femtosecond laser pulses for surface-profile metrology

Optics Letters
2005-10-01 | Journal article
DOI: 10.1364/ol.30.002650
Part of ISSN: 0146-9592
Part of ISSN: 1539-4794
Source: Self-asserted source
Jeong Seok Oh
How many people are using ORCID?