Personal information

Other IDs

Scopus Author ID: 7004535088

Activities

Collapse all

Employment (3)

University of Waterloo: Waterloo, ON, CA

2008-09-01 to present
Employment
Source: Self-asserted source
Abhijit Brahme

Max-Planck-Institut für Eisenforschung GmbH: Dusseldorf, Nordrhein-Westfalen, DE

2006-10-01 to 2008-08-31
Employment
Source: Self-asserted source
Abhijit Brahme

Carnegie Mellon University: Pittsburgh, PA, US

2005-09-01 to 2006-09-31
Employment
Source: Self-asserted source
Abhijit Brahme

Works (32)

Thermodynamically consistent damage evolution model coupled with rate-dependent crystal plasticity: Application to high-strength low alloy steel at various strain rates

International Journal of Plasticity
2025-03 | Journal article
DOI: 10.1016/j.ijplas.2025.104255
Contributors: Sandipkumar Dayani; Waqas Muhammad; Abhijit Brahme; Fatemah Hekmat; Trevor Sabiston; Kaan Inal
Source: check_circle
Crossref

Prediction of ductile damage evolution based on experimental data using artificial neural networks

International Journal of Solids and Structures
2022-12 | Journal article
DOI: 10.1016/j.ijsolstr.2022.111950
Contributors: A. Schowtjak; J. Gerlach; W. Muhammad; A.P. Brahme; T. Clausmeyer; K. Inal; A.E. Tekkaya
Source: check_circle
Crossref

A convolutional neural network based crystal plasticity finite element framework to predict localised deformation in metals

International Journal of Plasticity
2022-10 | Journal article
DOI: 10.1016/j.ijplas.2022.103374
Contributors: Olga Ibragimova; Abhijit Brahme; Waqas Muhammad; Daniel Connolly; Julie Lévesque; Kaan Inal
Source: check_circle
Crossref

Application of artificial neural networks in micromechanics for polycrystalline metals

International Journal of Plasticity
2019-09 | Journal article
DOI: 10.1016/j.ijplas.2019.05.001
Contributors: Usman Ali; Waqas Muhammad; Abhijit Brahme; Oxana Skiba; Kaan Inal
Source: check_circle
Crossref

A computational mechanics engineering framework for predicting the axial crush response of Aluminum extrusions

Thin-Walled Structures
2019-07 | Journal article
DOI: 10.1016/j.tws.2019.02.007
Contributors: Christopher P. Kohar; Abhijit Brahme; Fatemeh Hekmat; Raja K. Mishra; Kaan Inal
Source: check_circle
Crossref

Twinning and texture randomization in Mg and Mg-Ce alloys

International Journal of Plasticity
2019-06 | Journal article
DOI: 10.1016/j.ijplas.2019.03.001
Contributors: Raja K. Mishra; Abhijit Brahme; Rama Krushna Sabat; Li Jin; Kaan Inal
Source: check_circle
Crossref

Development of high crush efficient, extrudable aluminium front rails for vehicle lightweighting

International Journal of Impact Engineering
2016 | Journal article
DOI: 10.1016/j.ijimpeng.2016.04.004
EID:

2-s2.0-84965166228
Contributors: Kohar, C.P.; Zhumagulov, A.; Brahme, A.; Worswick, M.J.; Mishra, R.K.; Inal, K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Effect of extension {1012} twins on texture evolution at elevated temperature deformation accompanied by dynamic recrystallization

Materials and Design
2016 | Journal article
DOI: 10.1016/j.matdes.2016.02.042
EID:

2-s2.0-84960154474
Contributors: Popova, E.; Brahme, A.P.; Staraselski, Y.; Agnew, S.R.; Mishra, R.K.; Inal, K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Large strain cyclic simple shear behavior of aluminum extrusions: An experimental and numerical study

TMS Light Metals
2016 | Conference paper
EID:

2-s2.0-84974604193
Contributors: Muhammad, W.; Brahme, A.; Kang, J.; Mishra, R.; Inal, K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Large Strain Cyclic Simple Shear Behavior of Aluminum Extrusions: An xperimental and Numerical Study

Light Metals 2016
2016 | Book
DOI: 10.1002/9781119274780.ch29
EID:

2-s2.0-84982218119
Contributors: Muhammad, W.; Brahme, A.; Kang, J.; Mishra, R.; Inal, K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

New methodology to determine stable texture components under cold rolling in fcc metals

TMS Light Metals
2016 | Conference paper
EID:

2-s2.0-84974536481
Contributors: Ali, U.; Brahme, A.P.; Mishra, R.K.; Inal, K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

New Methodology to Determine Stable Texture Components Under Cold Rolling in FCC Metals

Light Metals 2016
2016 | Book
DOI: 10.1002/9781119274780.ch27
EID:

2-s2.0-84982223806
Contributors: Ali, U.; Brahme, A.P.; Mishra, R.K.; Inal, K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Coupled crystal plasticity - Probabilistic cellular automata approach to model dynamic recrystallization in magnesium alloys

International Journal of Plasticity
2015 | Journal article
DOI: 10.1016/j.ijplas.2014.04.008
EID:

2-s2.0-84961372802
Contributors: Popova, E.; Staraselski, Y.; Brahme, A.; Mishra, R.K.; Inal, K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Reconstruction of the 3D representative volume element from the generalized two-point correlation function

Modelling and Simulation in Materials Science and Engineering
2015 | Journal article
DOI: 10.1088/0965-0393/23/1/015007
EID:

2-s2.0-84919623524
Contributors: Staraselski, Y.; Brahme, A.; Mishra, R.K.; Inal, K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Effects of post-necking hardening behavior and equivalent stress-strain curves on the accuracy of M-K based forming limit diagrams

Computational Materials Science
2014 | Journal article
DOI: 10.1016/j.commatsci.2014.01.017
EID:

2-s2.0-84893216529
Contributors: Mohammadi, M.; Brahme, A.P.; Mishra, R.K.; Inal, K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Analytical estimation of distance-disorientation function of the material microstructure

Philosophical Magazine
2013 | Journal article
DOI: 10.1080/14786435.2013.807027
EID:

2-s2.0-84883598496
Contributors: Staraselski, Y.; Brahme, A.; Inal, K.; Mishra, R.K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Numerical analyses of surface roughness during bending of FCC single crystals and polycrystals

International Journal of Plasticity
2013 | Journal article
DOI: 10.1016/j.ijplas.2013.01.016
EID:

2-s2.0-84876903752
Contributors: Rossiter, J.; Brahme, A.; Inal, K.; Mishra, R.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Determination of the minimum scan size to obtain representative textures by electron backscatter diffraction

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2012 | Journal article
DOI: 10.1007/s11661-012-1364-5
EID:

2-s2.0-84870469564
Contributors: Brahme, A.; Staraselski, Y.; Inal, K.; Mishra, R.K.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

A new strain hardening model for rate-dependent crystal plasticity

Computational Materials Science
2011 | Journal article
DOI: 10.1016/j.commatsci.2011.05.006
EID:

2-s2.0-79959529598
Contributors: Brahme, A.P.; Inal, K.; Mishra, R.K.; Saimoto, S.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Distribution of stress triaxiality in face-centered cubic polycrystals under equibiaxial loading

Scripta Materialia
2011 | Journal article
DOI: 10.1016/j.scriptamat.2011.03.035
EID:

2-s2.0-79957471824
Contributors: Rossiter, J.; Brahme, A.; Inal, K.; Mishra, R.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

The backstress effect of evolving deformation boundaries in FCC polycrystals

International Journal of Plasticity
2011 | Journal article
DOI: 10.1016/j.ijplas.2011.02.006
EID:

2-s2.0-79956063630
Contributors: Brahme, A.P.; Inal, K.; Mishra, R.K.; Saimoto, S.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

A new crystal plasticity scheme for explicit time integration codes to simulate deformation in 3D microstructures: Effects of strain path, strain rate and thermal softening on localized deformation in the aluminum alloy 5754 during simple shear

International Journal of Plasticity
2010 | Journal article
DOI: 10.1016/j.ijplas.2010.02.007
EID:

2-s2.0-77958017908
Contributors: Rossiter, J.; Brahme, A.; Simha, M.H.; Inal, K.; Mishra, R.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Modeling texture evolution during recrystallization in aluminum

Modelling and Simulation in Materials Science and Engineering
2009 | Journal article
DOI: 10.1088/0965-0393/17/1/015005
EID:

2-s2.0-64049104816
Contributors: Brahme, A.; Fridy, J.; Weiland, H.; Rollett, A.D.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Prediction of cold rolling texture of steels using an Artificial Neural Network

Computational Materials Science
2009 | Journal article
DOI: 10.1016/j.commatsci.2009.04.014
EID:

2-s2.0-70349191618
Contributors: Brahme, A.; Winning, M.; Raabe, D.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

A texture component model for predicting recrystallization textures

Materials Science Forum
2007 | Book
EID:

2-s2.0-38349112977
Contributors: Winning, M.; Raabe, D.; Brahme, A.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

An overview of accomplishments and challenges in recrystallization and grain growth

Materials Science Forum
2007 | Book
EID:

2-s2.0-38349129169
Contributors: Rollett, A.D.; Brahme, A.P.; Roberts, C.G.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Modeling recrystallization in aluminum using input from experimental observations

Materials Science Forum
2007 | Book
EID:

2-s2.0-38349125140
Contributors: Brahme, A.; Fridy, J.; Rollett, A.D.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

3D reconstruction of microstructure in a commercial purity aluminum

Scripta Materialia
2006 | Journal article
DOI: 10.1016/j.scriptamat.2006.02.017
EID:

2-s2.0-33646168480
Contributors: Brahme, A.; Alvi, M.H.; Saylor, D.; Fridy, J.; Rollett, A.D.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

3D digital microstructures for prognosis modeling

Materials Damage Prognosis - Proceedings of a Symposium of the Materials Science and Technology 2004 Conference
2005 | Conference paper
EID:

2-s2.0-33244494211
Contributors: Brahme, A.; Saylor, D.; Campman, R.; Lee, S.; Fridy, J.; Rollett, A.D.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Simulation of fatigue crack initiation and propagation in aluminum alloys using realistic microstructures

11th International Conference on Fracture 2005, ICF11
2005 | Conference paper
EID:

2-s2.0-84869758147
Contributors: Anagnostou, E.; Brahme, A.; Cornwell, C.; El-Dasher, B.S.; Fridy, J.; Horstemeyer, M.F.; Ingraffea, A.R.; Lee, S.-B.; Maniatty, A.; Noack, R. et al.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Recrystallization kinetics in hot rolled aluminum: A combined experimental and simulation approach

TMS Annual Meeting
2003 | Conference paper
EID:

2-s2.0-0242303009
Contributors: Rollett, A.D.; Alvi, M.H.; Brahme, A.P.; Weiland, H.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier

Statistically representative three-dimensional microstructures for modeling microstructural evolution in aluminum

Metallurgical Modeling for Aluminum Alloys - Proceedings from Materials Solutions Conference 2003: 1st International Symposium on Metallurgical Modeling for Aluminum Alloys
2003 | Conference paper
EID:

2-s2.0-2342454342
Contributors: Brahme, A.; Saylor, D.M.; Fridy, J.; Rollett, A.D.
Source: Self-asserted source
Abhijit Brahme via Scopus - Elsevier
How many people are using ORCID?