Personal information

Emails & domains

Verified email domains

Other IDs

Scopus Author ID: 56115188600

Countries

Poland

Activities

Collapse all

Employment (1)

Sieć Badawcza Łukasiewicz – Instytut Metali Nieżelaznych: Gliwice, PL

2015-09-01 to present
Employment
Source: Self-asserted source
Piotr Madej

Funding (1)

Environmentally friendly technology for the recovery of critical metals and strategic metals from petrochemical catalysts with reduced carbon footprint achieved through hybrid separation methods

2023-05 to 2026-05 | Grant
National Centre for Research and Development (Warsaw, PL)
GRANT_NUMBER:

LIDER13/0133/2022
Source: Self-asserted source
Piotr Madej

Works (21)

De-coppering of Metallurgical Slag Using Printed Circuit Boards as a Reducer

Archives of Foundry Engineering
2025-03-17 | Journal article
DOI: 10.24425/afe.2025.153784
Contributors: Ł. Kortyka; J. Łabaj; P. Madej; Ł. Myćka; M. Lewandowska; T. Matuła
Source: check_circle
Crossref

Studies on removal of petroleum fractions from spent petrochemical catalysts to prepare them for pyrometallurgical recovery of Ni, Mo and V

Scientific Reports
2025-03-14 | Journal article
DOI: 10.1038/s41598-025-91247-x
Part of ISSN: 2045-2322
Contributors: Piotr Madej; Anna Czech; Krzysztof Pęcak; Andrzej Cybulski
Source: Self-asserted source
Piotr Madej

Influence of the Reduction Rate of Slag from Oxidation Process of Cu–Fe–Pb Alloy During Reduction (De-coppering) on Its Viscosity

Metallurgical and Materials Transactions B
2024-12-10 | Journal article
DOI: 10.1007/s11663-024-03381-y
Part of ISSN: 1073-5615
Part of ISSN: 1543-1916
Contributors: Piotr Madej
Source: Self-asserted source
Piotr Madej

Fast Numerical Optimization of Electrode Geometry in a Two-Electrode Electric Resistance Furnace Using a Surrogate Criterion Derived Exclusively from an Electromagnetic Submodel

Applied Sciences
2024-11-26 | Journal article
DOI: 10.3390/app142310957
Contributors: Radosław Zybała; Jakub Wyciślik; Sławomir Golak; Piotr Ciepliński; Tomasz Sak; Piotr Madej
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Decoppering of Metallurgical Slag Using Printed Circuit Boards as a Reducer

2024-09-02 | Conference paper
DOI: 10.3390/proceedings2024108015
Contributors: Łukasz Kortyka; Łukasz Myćka; Piotr Madej; Jerzy Łabaj; Tomasz Matuła; Marta Lewandowska
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Reduction of Metallurgical Slag with High Cu and Pb Content Using a Bioreducer in the Form of Rapeseed Cake

2024-09-02 | Conference paper
DOI: 10.3390/proceedings2024108017
Contributors: Łukasz Myćka; Piotr Madej; Łukasz Kortyka; Jerzy Łabaj; Tomasz Matuła
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Process of Copper Slag Reduction in an Electric Furnace and the Possibilities of Its Modelling

2024-08-28 | Conference paper
DOI: 10.3390/proceedings2024108005
Contributors: Radosław Zybała; Sławomir Golak; Tomasz Sak; Piotr Madej
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Electrical and thermal analysis for the copper removal process in an electric furnace

Computer Methods in Material Science
2023 | Journal article
DOI: 10.7494/cmms.2023.4.0810
Contributors: Rados�aw Zyba�a; S�awomir Golak; Tomasz Sak; Piotr Madej
Source: check_circle
Crossref

Research of metals recovery from printed circuit board scrap in pilot scale test

Proceedings - European Metallurgical Conference, EMC 2023
2023 | Conference paper
EID:

2-s2.0-85182926280

Part of ISBN: 9783935797351
Contributors: Madej, P.; Lewandowska, M.; Krawiec, G.; Kostrzewa, M.; Sak, T.; Kortyka, Ł.; Myćka, Ł.; Zybała, R.; Jaworek, Ł.; Klejnowska, K.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier

Application of Spent Coffee Grounds (SCGs) as a Fuel and Alternative Reducer of Slags from the Copper Industry

Energies
2023-03-02 | Journal article
DOI: 10.3390/en16052415
Contributors: Tomasz Matula; Jerzy Labaj; Krzysztof Nowacki; Leszek Blacha; Lukasz Kortyka; Lukasz Mycka; Piotr Madej; Lukasz Jaworek; Tomasz Wojtal
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

The effect of adding iron powder from plasma cutting on the microstructure, mechanical properties of the composite based on aluminum powder matrix made using powder metallurgy

Archives of Metallurgy and Materials
2021 | Journal article
DOI: 10.24425/amm.2021.134785
EID:

2-s2.0-85099315956

Part of ISSN: 17333490
Contributors: Wȩdrychowicz, M.; Bydałek, A.W.; MIGAS, P.; SKRZEKUT, T.; NOGA, P.; MADEJ, P.; Kałasznikow, A.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier

Analysis of the mechanical strength, structure and possibilities of using waste phosphogypsum in aluminum powder composites

SN Applied Sciences
2019 | Journal article
DOI: 10.1007/s42452-019-0995-1
EID:

2-s2.0-85077150708

Part of ISSN: 25233971
Contributors: Wędrychowicz, M.; Bydałek, A.W.; Skrzekut, T.; Noga, P.; Gabryelewicz, I.; Madej, P.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier
grade
Preferred source (of 2)‎

Green revolution at KGHM – Next stage

Proceedings of the 10th European Metallurgical Conference, EMC 2019
2019 | Conference paper
EID:

2-s2.0-85081604740

Part of ISBN: 9783940276872
Contributors: Śmieszek, Z.; Krawiec, G.; Sak, T.; Madej, P.; Gut, M.; Przebindowski, Z.; Garycki, L.; Drapinski, A.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier

Influence of temperature and agitation on reduction rate of converter slag from CuŻePb alloy fining process

Proceedings of the 10th European Metallurgical Conference, EMC 2019
2019 | Conference paper
EID:

2-s2.0-85081606291

Part of ISBN: 9783940276872
Contributors: Madej, P.; Kortyka, Ł.; Sak, T.; Krawiec, G.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier

Examination of the flash smelting slag decoppering proces kinetics

Proceedings - European Metallurgical Conference, EMC 2017
2017 | Conference paper
EID:

2-s2.0-85081371024

Part of ISBN: 9783940276742
Contributors: Madej, P.; Czernecki, J.; Sak, T.; Krawiec, G.; Kortyka, Ł.; Klejnowska, K.; Onderka, B.; Palimąka, P.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier

Metallurgy of non-ferrous metals in Poland

Journal of Chemical Technology and Metallurgy
2017 | Journal article
EID:

2-s2.0-85014072006

Part of ISSN: 13147978 13147471
Contributors: Śmieszek, Z.; Czernecki, J.; Sak, T.; Madej, P.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier

Surface tension and density of the copper-rich Cu-Pb-Fe alloys

Proceedings - European Metallurgical Conference, EMC 2017
2017 | Conference paper
EID:

2-s2.0-85081378496

Part of ISBN: 9783940276728
Contributors: Sak, T.; Czernecki, J.; Madej, P.; Krawiec, G.; Kortyka, Ł.; Pietrzyk, S.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier

Influence of temperature on the rate of copper recovery from the slag of the flash direct-to-blister process by a solid carbon reducer

Archives of Metallurgy and Materials
2015 | Journal article
DOI: 10.1515/amm-2015-0289
EID:

2-s2.0-84949480689

Part of ISSN: 17333490
Contributors: Madej, P.; Kucharski, M.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier

A study on the copper recovery from the slag of the Outokumpu direct-to-copper process

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014 | Journal article
DOI: 10.1007/s11663-013-9961-2
EID:

2-s2.0-84898994531

Part of ISSN: 10735615
Contributors: Kucharski, M.; Sak, T.; Madej, P.; Wędrychowicz, M.; Mróz, W.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier
grade
Preferred source (of 2)‎

Recovery of tellurium from sodium carbonate slag

Archives of Metallurgy and Materials
2014 | Journal article
DOI: 10.2478/amm-2014-0009
EID:

2-s2.0-84898657836

Part of ISSN: 17333490
Contributors: Kucharski, M.; Madej, P.; Wedrychowicz, M.; Sak, T.; Mróz, W.
Source: Self-asserted source
Piotr Madej via Scopus - Elsevier
grade
Preferred source (of 2)‎

The Influence of the Carbon Surface on the Rate of Copper Recovery from Slag of the Direct-to-Blister Process

OALib
2014 | Journal article
DOI: 10.4236/oalib.1101057
Part of ISSN: 2333-9721
Part of ISSN: 2333-9705
Contributors: Piotr Madej; Marian Kucharski
Source: Self-asserted source
Piotr Madej
How many people are using ORCID?