Personal information

Verified email addresses

Activities

Employment (3)

Research Institute of Medium & Small Shipbuilding: Busan, KR

2024-06-10 to present | Senior researcher (Advanced Production Technology Center)
Employment
Source: Self-asserted source
Byung Joo Kim

Korea Institute of Materials Science: Changwon, KR

2022-05 to 2026-06 | Post doc. (Lightweight Materials Research Division)
Employment
Source: Self-asserted source
Byung Joo Kim

Pusan National University: Busan, KR

2016-03 to 2022-02 | Integrated Master's and Ph.D. Program (Department of Materials Science and Engineering)
Employment
Source: Self-asserted source
Byung Joo Kim

Works (22)

Influence of twist angle and diameter on yarn densification and mechanical-electrical properties of multi-ply carbon nanotube yarns

Journal of Materials Research and Technology
2025-03 | Journal article
Contributors: Yeongsu Jo; Byung-Joo Kim; Su-Hyeon Kim; Hyung Woo Lee
Source: check_circle
Crossref

Distinguished roles of static aging and strain aging in the microstructure and creep resistance of Mg-4Y-3.5Nd alloy

Journal of Materials Science and Technology
2024 | Journal article
EID:

2-s2.0-85177841840

Part of ISSN: 10050302
Contributors: Zhang, Z.; Huo, Q.; Zhang, Y.; Kim, B.-J.; Nagaumi, H.; Yang, X.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier
grade
Preferred source (of 2)‎

Effect of reaction temperature and holding time on the interfacial microstructure of Al–Si–Mg/Cu bimetals manufactured by hot-dip aluminizing

Materials Chemistry and Physics
2024 | Journal article
EID:

2-s2.0-85179001103

Part of ISSN: 02540584
Contributors: Kim, B.-J.; Cheon, H.-S.; Lee, Y.-H.; Kim, W.-K.; Lee, Y.-S.; Kim, S.-H.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier
grade
Preferred source (of 2)‎

Effect of Solution Temperature and Quench Delay on the Microstructure and Mechanical Properties of an Extruded Al-Mg-Si-Cu-Mn alloy,Al-Mg-Si-Cu-Mn 합금 압출재의 미세조직 및 기계적 성질에 미치는 용체화 온도와 칭 지연의 영향

Journal of Korean Institute of Metals and Materials
2024 | Journal article
EID:

2-s2.0-85186416759

Part of ISSN: 17388228
Contributors: Kim, J.; Jung, J.; Cheon, H.-S.; Kim, B.-J.; Lim, C.-Y.; Kim, S.-H.; Choi, Y.S.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier

Formation and Evolution of Interfacial Structure in Al–Si–Mg/Stainless Steel Bimetals during Hot-Dipping Process

Crystals
2024 | Journal article
EID:

2-s2.0-85191494569

Part of ISSN: 20734352
Contributors: Kim, B.-J.; Lim, H.-Y.; Kayani, S.H.; Lee, Y.-S.; Kim, S.-H.; Cha, J.-H.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier
grade
Preferred source (of 2)‎

Impact of intermetallic phases on the localised pitting corrosion and high-temperature tensile strength of Al–Si[sbnd]Mg[sbnd]Cu[sbnd]Ni alloys

Corrosion Science
2024 | Journal article
EID:

2-s2.0-85190735486

Part of ISSN: 0010938X
Contributors: Kayani, S.H.; Ha, H.-Y.; Kim, B.-J.; Cho, Y.-H.; Son, H.-W.; Lee, J.-M.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier

Impact of Intermetallic Phases on the Localized Pitting Corrosion and High-Temperature Tensile Strength of Al–Si‒Mg‒Cu‒Ni Alloys

SSRN
2024 | Other
EID:

2-s2.0-85186529618

Part of ISSN: 15565068
Contributors: Kayani, S.H.; Ha, H.-Y.; Kim, B.-J.; Cho, Y.-H.; Son, H.-W.; Lee, J.-M.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier

Solidification Behavior and Mechanical Properties of a Quaternary Eutectic Al-Cu-Si-Mg Alloy

SSRN
2024 | Other
EID:

2-s2.0-85195062903

Part of ISSN: 15565068
Contributors: Kim, B.-J.; Kayani, S.H.; Zhang, Z.; Cho, Y.-H.; Kim, S.-H.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier

Microstructure and Mechanical Behavior of Structural Materials

Crystals
2024-12-13 | Journal article
Contributors: Saif Haider Kayani; Byung-Joo Kim
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Solidification behavior and mechanical properties of a quaternary eutectic Al–Cu–Si–Mg alloy

Journal of Alloys and Compounds
2024-12-05 | Journal article
Part of ISSN: 0925-8388
Contributors: Byung-Joo Kim; Saif Haider Kayani; Zhirou Zhang; Young-Hee Cho; Su-Hyeon Kim
Source: Self-asserted source
Byung Joo Kim

Effect of prerolling before artificial aging on the mechanical properties of high-Zn-content Al–Zn–Mg–Cu–Sc–Zr–Mn alloy

Journal of Materials Research and Technology
2024-11 | Journal article
Contributors: Hyun-Seok Cheon; Byung-Joo Kim; Jisu Kim; Jeki Jung; Su-Hyeon Kim; Je In Lee
Source: check_circle
Crossref

The effect of melt thermal-rate treatment on precipitation hardening and mechanical properties of Al–Si–Mg alloys

Journal of Materials Research and Technology
2024-11 | Journal article
Part of ISSN: 2238-7854
Contributors: Sang-Ik Lee; Saif Haider Kayani; Yoon-Ho Lee; Byung-Joo Kim; Kwangjun Euh; Je-In Lee; Young-Hee Cho
Source: Self-asserted source
Byung Joo Kim

Influence of Powder Size on Pore Characteristics and Intermetallic Phase Kinetics in Porous Ti-Al Alloys

Crystals
2024-06-17 | Journal article
Part of ISSN: 2073-4352
Contributors: Saif Haider Kayani; Hafiz Muhammad Salman Ajmal; Byung-Joo Kim; Nho-Kwang Park; Kwangjun Euh
Source: Self-asserted source
Byung Joo Kim

Effect of Reaction Temperature and Holding Time on the Interfacial Microstructure of Al-Si-Mg/Cu Bimetals Manufactured by Hot-Dip Aluminizing

SSRN
2023 | Other
EID:

2-s2.0-85163136510

Part of ISSN: 15565068
Contributors: Kim, B.-J.; Cheon, H.-S.; Lee, Y.-H.; Kim, W.-K.; Lee, Y.-S.; Kim, S.-H.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier

Predicting the Hardness of Al-Sc-X Alloys with Machine Learning Models, Explainable Artificial Intelligence Analysis and Inverse Design,설명 가능한 인공지능으로 해석한 Al-Sc-X 합금의 경도 예측 기계학습 모델과 역설계

Journal of Korean Institute of Metals and Materials
2023 | Journal article
EID:

2-s2.0-85176231069

Part of ISSN: 17388228
Contributors: Park, J.; Kim, S.-H.; Kim, J.; Kim, B.-J.; Cheon, H.-S.; Oh, C.-S.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier

Melt thermal-rate treatment for uniform solute distribution and improved mechanical properties of an Al-Zn-Mg-Cu alloy prepared by direct-chill casting

Journal of Alloys and Compounds
2023-12 | Journal article
Part of ISSN: 0925-8388
Contributors: Byung-Joo Kim; Su-Hyeon Kim; Saif Haider Kayani; Yoon-Ho Lee; Won-Kyoung Kim; Hyun-Seok Cheon; Jisu Kim; Young-Hee Cho
Source: Self-asserted source
Byung Joo Kim
grade
Preferred source (of 2)‎

The effect of Sr additions on Al–Cu–Si ternary eutectic alloys for a high-ductility bimodal microstructure

Materials Science and Engineering: A
2022-01 | Journal article
Part of ISSN: 0921-5093
Contributors: Byung Joo Kim; Arne K. Dahle; Yong Ho Park; Young Cheol Lee
Source: Self-asserted source
Byung Joo Kim
grade
Preferred source (of 2)‎

Microstructural improvement of eutectic al + mg<sub>2</sub>si phases on al–zn–si–mg cast alloy with tib<sub>2</sub> particles additions

Materials
2021 | Journal article
EID:

2-s2.0-85107351709

Part of ISSN: 19961944
Contributors: Kim, B.; Hwang, J.; Park, Y.; Lee, Y.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier
grade
Preferred source (of 3)‎

Effect of Zn Additions on the Mechanical Properties of High Strength Al–Si–Mg–Cu Alloys

Minerals, Metals and Materials Series
2020 | Conference paper
EID:

2-s2.0-85079639357

Part of ISBN: 9783030364076
Part of ISSN: 23671696 23671181
Contributors: Jung, S.S.; Hwang, S.B.; Kim, B.J.; Park, Y.H.; Lee, Y.C.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier

Influence of TiB<sub>2</sub> Particles on Modification of Mg<sub>2</sub>Si Eutectic Phase in Al–Zn–Si–Mg–Cu Cast Alloys

Minerals, Metals and Materials Series
2020 | Conference paper
EID:

2-s2.0-85079619725

Part of ISBN: 9783030364076
Part of ISSN: 23671696 23671181
Contributors: Kim, B.J.; Jung, S.S.; Park, Y.H.; Lee, Y.C.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier

Preparation of fly ash/epoxy composites and its effects on mechanical properties

Polymers
2020 | Journal article
EID:

2-s2.0-85078350753

Part of ISSN: 20734360
Contributors: Sim, J.; Kang, Y.; Kim, B.J.; Park, Y.H.; Lee, Y.C.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier
grade
Preferred source (of 2)‎

Effect of eutectic Mg<sub>2</sub>si phase modification on the mechanical properties of Al-8Zn-6Si-4Mg-2Cu cast alloy

Metals
2019 | Journal article
EID:

2-s2.0-85059662193

Part of ISSN: 20754701
Contributors: Kim, B.J.; Jung, S.S.; Hwang, J.H.; Park, Y.H.; Lee, Y.C.
Source: Self-asserted source
Byung Joo Kim via Scopus - Elsevier
grade
Preferred source (of 3)‎