Personal information

Verified email addresses

Verified email domains

Hydrogen technology, HiperFer alloy development, High temperature materials

Activities

Employment (4)

Deggendorf Institute of Technology: Deggendorf, Bavaria, DE

2024-03-01 to present | Professor for Hydrogen technology: Electrolysis and fuel cell technology (Electrical Engineering and Media Technology)
Employment
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Hochschule RheinMain: Ruesselsheim, Hessen, DE

2023-01-01 to 2024-02-29 | Professor for Hydrogen Technology and Energy Storage (Faculty of Engineering)
Employment
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Forschungszentrum Jülich GmbH: Julich, Nordrhein-Westfalen, DE

2008-04-01 to 2022-12-31 | Subject Leader Metallic Materials and Joining Technology (Institute of Microstructure and Properties of Materials (IEK-2))
Employment
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

BMW (Germany): Munich, Bavaria, DE

2002-04-01 to 2008-03-31 | Technology Specialist (Future Power Train Technologies)
Employment
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Education and qualifications (2)

Technische Universität Clausthal: Clausthal-Zellerfeld, Niedersachsen, DE

2005-10-01 to 2008-03-31 | Dr.-Ing. (Fakultät Natur- und Materialwissenschaften, Institut für Metallurgie)
Education
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Ostbayerische Technische Hochschule Amberg-Weiden: Amberg, Bavaria, DE

1997-10-01 to 2002-04-30 | Dipl.-Ing. Environmental Technology
Education
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Professional activities (10)

10th EPRI International Conference on Advances in Materials, Manufacturing & Repair for Power Plants: Bonita Springs, Florida, US

2024-10-15 to 2024-10-18 | Scientific Advisory Board Member
Invited position
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Joint EPRI HiMat International Conference on Advances in High Temperature Materials: Nagasaki, JP

2019 to 2019 | Scientific Advisory Board Member
Service
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

European Creep Collaborative Committee: Rome, IT

2011 to 2018
Membership
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

International Conference on Advances in Materials Technology for Fossil Power Plants : Albufeira, PT

2016 to 2016 | Scientific Advisory Board Member
Service
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Institute of Materials Minerals and Mining: London, London, GB

2015-07-15 | Charles Hatchett Award
Distinction
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

International ECCC Conference on Creep & Fracture in High Temperature Components, Design & Life Assessment: Rome, IT

2014 to 2014 | Scientific Advisory Board Member, Session Chairman
Service
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

International European Conference on Steel and Composite Structures (Eurosteel): Naples, IT

2014 to 2014 | Scientific Advisory Board Member
Service
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Intl. Conference on Materials for Advanced Power Engineering (MAPE): Liége, Wallonia, BE

2009 to 2014 | (Co-)Chairman (2010) 2014, Scientific Advisory Board Member, Session Chairman, Organization Board Member
Service
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

International Conference on Advances in Materials Technology for Fossil Power Plants: Waikoloa Village, Hawaii, US

2013 to 2013 | Scientific Advisory Board Member
Service
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Baden-Württemberg Ministry of the Environment, Climate Protection and the Energy Sector: Stuttgart, Baden-Württemberg, DE

2008 | f-cell Award (Nomination)
Distinction
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Funding (30)

Niederzyklische Hochtemperaturermüdung von Zirkonium

2022 to 2022 | Grant
MAN ES (Deggendorf, Bavaria, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Materials for active crack obstruction (MaakRib)

2021 to present | Grant
Deutsche Forschungsgemeinschaft (Bonn, DE)
GRANT_NUMBER:

KU 2700/3-1

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

STERN - STeigerung der KostenEffizienz von FlüssigsalzReceiverN

2021 to 2024 | Grant
Federal Ministry for Economic Affairs and Climate Action (Berlin, DE)
GRANT_NUMBER:

FKZ: 3EE5048D

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Corrosion fatigue and pit/crack transition mechanisms

2021 to 2023 | Grant
Federal Ministry for Economic Affairs and Climate Action (Berlin, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Niederzyklische Ermüdung von Zirkonium für chemische Reaktoren

2020 to 2020 | Contract
MAN ES (Deggendorf, Bavaria, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Beeinflussung Wandwärme Ottomotor

2019 to 2021 | Grant
AiF Projekt GmbH (Berlin, DE)
Part of GRANT_NUMBER:

AiF Nr.: 20347 BG/3

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Project 291: Stress Relaxation Mitigation Strategy

2018 to 2019 | Contract
Materials Technology Institute (St. Louis, US)
GRANT_NUMBER:

RFP 291

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Creep of FeNiCo alloy in steam

2018 to 2018 | Contract
Siemens AG (Mülheim, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Creep of additively manufactured IN738

2017 to 2018 | Contract
Fraunhofer-Institut für Lasertechnik ILT (Aachen, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Stress Relaxation Cracking of Austenitic Stainless Steels Using 4-Point Bend Relaxation Test Method

2017 to 2018 | Contract
Electric Power Research Institute (Charlotte, US)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Tensile behavior of IN713C, MM247, GMR235 miniature specimens extracted from automotive turbo charger rotors

2017 to 2018 | Contract
ALD Vacuum Technologies GmbH (Hanau, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Thermomechanically induced precipitation of intermetallic phases in heat resisting ferritic steels

2016-01-01 to present | Grant
German Research Foundation (Bonn, DE)
GRANT_NUMBER: 314367510
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn via DimensionsWizard

Mechanical properties of coating systems in gas turbines

2015 to 2015 | Contract
Rolls-Rolls Germany Ltd (Berlin, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Stress Relaxation Cracking of TP347HFG welded joints

2015 to 2015 | Contract
Linde AG (München, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

THERRI - Ermittlung von Kennwerten zur Bewertung des thermischen Ermüdungsrisswachstums

2014 to 2017 | Grant
Bundesministerium für Wirtschaft und Energie (Berlin, DE)
GRANT_NUMBER:

03ET7024A

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Very high cycle fatigue resistance of steam turbine alloys

2014 to 2014 | Contract
Siemens AG (Mülheim, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

High-Temperature and Energy Materials - Welding of Ferritic Steels Strengthened by Precipitation of Intermetallic Phases

2013 to 2016 | Grant
German Federal Ministry of Education and Research (Bonn, DE)
GRANT_NUMBER:

03EK3032

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Fatigue Crack propagation in polycrystalline and directionally solidified Ni-base superalloys

2013 to 2015 | Contract
Siemens AG (Mülheim, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Mechanisches Verhalten RAB-gelöteter Metall-Keramik-Verbunde bei der Herstellung und im Betrieb unter Hochtemperaturbeanspruchung

2013 to 2015 | Grant
Deutsche Forschungsgemeinschaft (Bonn, DE)
Part of GRANT_NUMBER:

PAK 524

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Entwicklung eines mobilen, dieselbetriebenen Brennstoffzellen-systems zur Stromversorgung parkender Nutzfahrzeuge (ENSA III); subcontracted on „Characterization of mechanically robust RAB metal/ceramic joints“

2012 to 2015 | Contract
Bundesministerium für Wirtschaft und Energie (Bonn, DE)
Part of GRANT_NUMBER:

03ET2048A-C

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Robuste Modelle zur verbesserten Werkstoffausnutzung für aktuelle Turbinenschaufelwerkstoffe II (RoMoTurb II)

2011 to 2014 | Grant
Bundesministerium für Wirtschaft und Energie (Bonn, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Mechanisches Verhalten RAB-gelöteter Metall-Keramik-Verbunde bei der Herstellung und im Betrieb unter Hochtemperaturbeanspruchung

2011 to 2013 | Grant
Deutsche Forschungsgemeinschaft (Bonn, DE)
Part of GRANT_NUMBER:

PAK 524

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Creep of micro alloyed Fe3Al

2010 to 2010 | Contract
Volkswagen AG (Wolfsburg, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

High temperature strength of thermomechanically treated ferritic and austenitic steels

2010 to 2010 | Contract
Outokumpu Nirosta GmbH (Kreferld, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Stress Relaxation Cracking of IN617B welded joints

2010 to 2010 | Contract
EOn Engineering GmbH (Gelsenkirchen, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Stress-relaxation properties of ex-service Ni-base super alloys

2010 to 2010 | Contract
LaborElec GDF Suez (Linkebeek, BE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Entwicklung von Höchstleistungswerkstoffen für Hochtemperatur-wärmeübertrager und PKW-Abgasanlagen (Ferrit950)

2009 to 2012 | Grant
Bundesministerium für Bildung und Forschung (Bonn, DE)
Part of GRANT_NUMBER:

03X3520E

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Entwicklung Nebenaggregate SOFC-APU (ENSA II); subcontracted on „Development of mechanically robust RAB metal/ceramic joints“

2008 to 2012 | Contract
Bundesministerium für Wirtschaft und Energie (Bonn, DE)
Part of GRANT_NUMBER:

0327823A-C

Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Low cycle fatigue and stress relaxation properties of steam power plant materials

2008 to 2010 | Contract
MAN Diesel & Turbo SE (Oberhausen, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Microstructure and mechanical properties of candidate alloys for 700 °C AUSC steam power plants

2008 to 2009 | Contract
Siemens AG (Mülheim, DE)
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Works (50 of 106)

Items per page:
Page 1 of 3

HiperFerAM – A route towards fault tolerant steel for additive manufacturing

Reference Module in Materials Science and Materials Engineering
2024 | Book chapter
Part of ISBN: 9780128035818
Contributors: M.B. Wilms; T. Fischer; B. Kuhn; J. Zielinski; S.-K. Rittinghaus
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Influence of the strain rate on the fatigue behaviour of fully ferritic high chromium steel and P91 steel at high temperatures

International Journal of Fatigue
2024-09 | Journal article | Author
Contributors: Patrick Lehner; Bastian Blinn; T. Fischer; Prof. Dr.-Ing. Bernd Kuhn; T. Beck
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn
grade
Preferred source (of 2)‎

Development of Self-Passivating, High Strength Ferritic Alloys for CSP and TES Application

SolarPACES Conference Proceedings
2024-03-21 | Journal article
Contributors: Fadoua Aarab; Bernd Kuhn
Source: check_circle
Crossref

Development of Self-Passivating, High-Strength Ferritic Alloys for Concentrating Solar Power (CSP) and Thermal Energy Storage (TES) Applications

Energies
2023-05-14 | Journal article
Contributors: Fadoua Aarab; Bernd Kuhn
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Heat Treatment of High-Performance Ferritic (HiperFer) Steels

Materials
2023-05-01 | Journal article
Contributors: Bernd Kuhn; Michal Talik
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Laves Phase Precipitation Behavior in HiperFer (High Performance Ferritic) Steel with and without Boron Alloying

Metals
2023-01-26 | Journal article
Part of ISSN: 2075-4701
Contributors: Jana Pöpperlová; Daniela Wipp; Bernd Kuhn; Wolfgang Bleck
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn

Active Crack Obstruction Mechanisms in Crofer® 22H at 650 °C

Materials
2022-09-09 | Journal article
Contributors: Torsten Fischer; Bernd Kuhn
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Impact of Processing on the Creep Properties of High Performance Ferritic (HiperFer) Steels

Metals
2022-08-30 | Journal article
Contributors: Bernd Kuhn; Michal Talik
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Additive Manufacturing Potentials of High Performance Ferritic (HiperFer) Steels

Applied Sciences
2022-07-18 | Journal article
Contributors: Torsten Fischer; Bernd Kuhn; Xiuru Fan; Markus Benjamin Wilms
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

A New Approach to Low-Cost, Solar Salt-Resistant Structural Materials for Concentrating Solar Power (CSP) and Thermal Energy Storage (TES)

Metals
2021-12-07 | Journal article
Contributors: Fadoua Aarab; Bernd Kuhn; Alexander Bonk; Thomas Bauer
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Up-Scaling of Thermomechanically Induced Laves Phase Precipitation in High Performance Ferritic (HiperFer) Stainless Steels

Materials
2021-03-26 | Journal article
Contributors: Jana Pöpperlová; Xiuru Fan; Bernd Kuhn; Ulrich Krupp
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Compositional Optimization of High-Performance Ferritic (HiperFer) Steels—Effect of Niobium and Tungsten Content

Metals
2020-09-29 | Journal article
Contributors: Xiuru Fan; Bernd Kuhn; Jana Pöpperlová; Wolfgang Bleck; Ulrich Krupp
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Analysis of the Thermomechanical Fatigue Behavior of Fully Ferritic High Chromium Steel Crofer®22 H with Cyclic Indentation Testing

Applied Sciences
2020-09-16 | Journal article
Contributors: Bastian Blinn; David Görzen; Torsten Fischer; Bernd Kuhn; Tilmann Beck
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Impact of Thermomechanical Fatigue on Microstructure Evolution of a Ferritic-Martensitic 9 Cr and a Ferritic, Stainless 22 Cr Steel

Applied Sciences
2020-09-11 | Journal article
Contributors: Bernd Kuhn; Jennifer Lopez Barrilao; Torsten Fischer
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Thermomechanically Induced Precipitation in High-Performance Ferritic (HiperFer) Stainless Steels

Applied Sciences
2020-08-18 | Journal article
Contributors: Xiuru Fan; Bernd Kuhn; Jana Pöpperlová; Wolfgang Bleck; Ulrich Krupp
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Fatigue Cracking of Additively Manufactured Materials—Process and Material Perspectives

Applied Sciences
2020-08-11 | Journal article
Contributors: Torsten Fischer; Bernd Kuhn; Detlef Rieck; Axel Schulz; Ralf Trieglaff; Markus Benjamin Wilms
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Impact of Tungsten on Thermomechanically Induced Precipitation of Laves Phase in High Performance Ferritic (HiperFer) Stainless Steels

Applied Sciences
2020-06-28 | Journal article
Contributors: Jana Pöpperlová; Xiuru Fan; Bernd Kuhn; Wolfgang Bleck; Ulrich Krupp
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Deuterium retention in tungsten and reduced activation steels after 3 MeV proton irradiation

Nuclear Materials and Energy
2020-05 | Journal article
Contributors: S. Möller; R. Krug; R. Rayaprolu; B. Kuhn; E. Joußen; A. Kreter
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Science and Technology of High Performance Ferritic (HiperFer) Stainless Steels

Metals
2020-04-02 | Journal article
Contributors: Bernd Kuhn; Michal Talik; Torsten Fischer; Xiuru Fan; Yukinori Yamamoto; Jennifer Lopez Barrilao
Source: check_circle
Crossref

Science and Technology of High Performance Ferritic (HiperFer) Stainless Steels

2020-03-07 | Other
Contributors: Bernd Kuhn; Michal Talik; Torsten Fischer; Xiuru Fan; Yukinori Yamamoto; Jennifer Lopez Barrilao
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

"Reactive" Microstructure: The Key to Cost-Effective, Fatigue-Resistant High-Temperature Structural Materials

2019 | Lecture/speech
SOURCE-WORK-ID: FZJ-2019-06141
Contributors: Kuhn, Bernd; Lopez Barrilao, Jennifer; Fischer, Torsten
Source: check_circle
Forschungszentrum Jülich

"Reactive" Microstructure: The Key to Cost-Effective, Fatigue-Resistant High-Temperature Structural Materials

2019 | Conference paper
SOURCE-WORK-ID: FZJ-2019-06138
Contributors: Kuhn, Bernd; Lopez Barrilao, Jennifer; Fischer, Torsten
Source: check_circle
Forschungszentrum Jülich

Impact of frequency, hold time and atmosphere on creep-fatigue of a 9–12% Cr steel from 300 °C−600 °C

International journal of fatigue
2019 | Journal article
SOURCE-WORK-ID: FZJ-2019-02506
Part of ISSN: 0142-1123
WOSUID:

WOS:000470940100027

Contributors: Fischer, T.; Kuhn, B.
Source: check_circle
Forschungszentrum Jülich

Influence of Steam Atmosphere on theCcrack Propagation Behavior of a 9–12% Cr Ferritic/Martensitic Steel at Temperatures from 300 °C to 600 °C Depending on Frequency and Hold Time

International journal of fatigue
2019 | Journal article
SOURCE-WORK-ID: FZJ-2018-05858
Part of ISSN: 0142-1123
WOSUID:

WOS:000451362300007

Contributors: Fischer, T.; Kuhn, B.
Source: check_circle
Forschungszentrum Jülich

New Insights Into the Threshold Behavior of a 9–12% Cr Ferritic/Martensitic Steel – Separation and Quantification of Crack Closure Mechanisms

International journal of fatigue
2019 | Journal article
SOURCE-WORK-ID: FZJ-2019-04000
Part of ISSN: 0142-1123
WOSUID:

WOS:000482492600043

Contributors: Fischer, T.; Kuhn, B.
Source: check_circle
Forschungszentrum Jülich

Potentials and Issues of Additive Manufactured components for Nuclear Power Plants

2019 | Conference paper
SOURCE-WORK-ID: FZJ-2019-05187
Contributors: Schulz, A.; Fischer, Torsten; Beckert, M.; Kuhn, Bernd; Trieglaff, R.
Source: check_circle
Forschungszentrum Jülich

Science and Technology of High Performance Ferritic (HiperFer) Steels

2019 | Lecture/speech
SOURCE-WORK-ID: FZJ-2019-06140
Contributors: Kuhn, Bernd; Lopez Barrilao, Jennifer; Fischer, Torsten
Source: check_circle
Forschungszentrum Jülich

A novel ferritic steel family hardened by intermetallic compound G-phase

Materials Science and Engineering: A
2019-02 | Journal article
Contributors: Mujin Yang; Jiahua Zhu; Tao Yang; Junhua Luan; Zengbao Jiao; Xiuru Fan; Bernd Kuhn; Xiangyuan Xiong; Cuiping Wang; Chain Tsuan Liu et al.
Source: check_circle
Crossref

High Performance Ferrite (HiperFer) - Properties and Application Potentials

2018 | Lecture/speech
SOURCE-WORK-ID: FZJ-2018-02284
Contributors: Lopez Barrilao, Jennifer; Kuhn, Bernd; Talik, M.; Yamamoto, Y.
Source: check_circle
Forschungszentrum Jülich

HiperFer, a reduced activation ferritic steel tested for nuclear fusion applications

Nuclear Materials and Energy
2018-12 | Journal article
Contributors: S. Möller; B. Kuhn; R. Rayaprolu; S. Heuer; M. Rasinski; A. Kreter
Source: check_circle
Crossref

Microstructure evolution and dislocation behaviour in high chromium, fully ferritic steels strengthened by intermetallic Laves phases

Micron
2018-05 | Journal article
Contributors: Jennifer Lopez Barrilao; Bernd Kuhn; Egbert Wessel
Source: check_circle
Crossref

Frequency and hold time influence on crack growth behavior of a 9 - 12% Cr ferritic martensitic steel at temperatures from 300 °C to 600 °C in air.

International Journal of Fatigue
2018-03 | Journal article
Contributors: T. Fischer; B. Kuhn
Source: check_circle
Crossref

Energiewende - Kraftwerksbetrieb im Wandel und die Herausforderungen durch neue Technologien

2017 | Lecture/speech
SOURCE-WORK-ID: FZJ-2017-03458
Contributors: Kuhn, Bernd; Beck, T.; Quadakkers, Willem J.; Naumenko, Dmitry; Malzbender, Jürgen; Singheiser, Lorenz
Source: check_circle
Forschungszentrum Jülich

High Performance Ferrite (HiperFer) - A New Alloy Family

2017 | Lecture/speech
SOURCE-WORK-ID: FZJ-2017-07141
Contributors: Kuhn, Bernd; Talik, M.; Lopez Barrilao, Jennifer; Skiera, Erik; Yamamoto, Y.; Trunova, O.
Source: check_circle
Forschungszentrum Jülich

High Performance Ferrite (HiperFer) - A New Alloy Family

2017 | Conference paper
SOURCE-WORK-ID: FZJ-2017-07140
Contributors: Kuhn, Bernd; Talik, M.; Lopez Barrilao, Jennifer; Skiera, Erik; Yamamoto, Y.; Trunova, O.; Schmitz-Niederau, M.
Source: check_circle
Forschungszentrum Jülich

Identification, Size Classification and Evolution of Laves Phase Precipitates in High Chromium, Fully Ferritic Steels

Micron
2017 | Journal article
SOURCE-WORK-ID: FZJ-2017-07118
Part of ISSN: 0968-4328
WOSUID:

WOS:000413283300029

Contributors: Lopez Barrilao, Jennifer; Kuhn, Bernd; Wessel, Egbert
Source: check_circle
Forschungszentrum Jülich

Microstructure Evolution of Fully Ferritic and Advanced HiperFer Steels

2017 | Conference poster
SOURCE-WORK-ID: FZJ-2017-07227
Contributors: Lopez Barrilao, Jennifer; Kuhn, Bernd; Wessel, Egbert; Skiera, Erik; Talik, M.
Source: check_circle
Forschungszentrum Jülich

Microstructure of Intermetallic Particle Strengthened Fully Ferritic and Advanced HiperFer Steels

2017 | Lecture/speech
SOURCE-WORK-ID: FZJ-2017-07228
Contributors: Lopez Barrilao, Jennifer; Kuhn, Bernd; Wessel, Egbert; Skiera, Erik; Talik, M.
Source: check_circle
Forschungszentrum Jülich

Microstructure of intermetallic particle strengthened high-chromium fully ferritic steels

Materials Science and Technology
2017-06 | Journal article
Contributors: J. Lopez Barrilao; B. Kuhn; E. Wessel; M. Talík
Source: check_circle
Crossref

Mechanical Properties of Porous ITM Alloy

International journal of hydrogen energy
2016 | Journal article
SOURCE-WORK-ID: FZJ-2016-02304
Part of ISSN: 0360-3199
WOSUID:

WOS:000368955300059

Contributors: Vasechko, V.; Pecanac, G.; Kuhn, Bernd; Malzbender, Jürgen
Source: check_circle
Forschungszentrum Jülich
grade
Preferred source (of 3)‎

Microstructure and Intermetallic Particle Evolution in Fully Ferritic Steels

2016 | Lecture/speech
SOURCE-WORK-ID: FZJ-2016-06588
Contributors: Lopez Barrilao, Jennifer; Kuhn, Bernd; Wessel, Egbert
Source: check_circle
Forschungszentrum Jülich

Microstructure and Intermetallic Particle Evolution in Fully Ferritic Steels

2016 | Conference paper
SOURCE-WORK-ID: FZJ-2016-06587
Contributors: Lopez Barrilao, Jennifer; Kuhn, Bernd; Wessel, Egbert
Source: check_circle
Forschungszentrum Jülich

Microstructure, Creep and Thermomechanical Fatigue of Novel Solid Solution and Laves Phase Strengthened Cr<inf>2</inf>O<inf>3</inf> and Al<inf>2</inf>O<inf>3</inf> Forming Ferrites for Car Engine Exhaust and Heat Exchanger Systems

Transactions of the Indian Institute of Metals
2016 | Journal article
EID:

2-s2.0-84954397270

Contributors: Beck, T.; Kuhn, B.; Eckardt, T.; Singheiser, L.
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn via Scopus - Elsevier
grade
Preferred source (of 2)‎

Characterization of Laves phase in Crofer 22 H stainless steel

Micron
2015 | Journal article
EID:

2-s2.0-84929380059

Contributors: Hsiao, Z.-W.; Kuhn, B.; Chen, D.; Singheiser, L.; Kuo, J.-C.; Lin, D.-Y.
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn via Scopus - Elsevier
grade
Preferred source (of 2)‎

Ferritische Hochleistungswerkstoffe (HiperFer) - Ein Entwicklungsstatus

2015 | Lecture/speech
SOURCE-WORK-ID: FZJ-2015-07739
Contributors: Kuhn, Bernd; Talik, Michal; Lopez Barrilao, Jennifer; Singheiser, Lorenz
Source: check_circle
Forschungszentrum Jülich

High Temperature Mechanical Properties of a 17wt% Cr High Performance Ferritic (HiperFer) Steel Strengthened by Intermetallic Laves Phase Particles

2015 | Lecture/speech
SOURCE-WORK-ID: FZJ-2015-06238
Contributors: Talik, Michal; Lopez Barrilao, Jennifer; Kuhn, Bernd
Source: check_circle
Forschungszentrum Jülich

Microstructure Evolution of High Temperature Fully Ferritic Steels

2015 | Lecture/speech
SOURCE-WORK-ID: FZJ-2015-06237
Contributors: Lopez Barrilao, Jennifer; Talik, Michal; Kuhn, Bernd; Wessel, Egbert
Source: check_circle
Forschungszentrum Jülich

Microstructure of Intermetallic Particle Strengthened High Chromium Fully Ferritic Steels

2015 | Lecture/speech
SOURCE-WORK-ID:

FZJ-2015-06239

Contributors: Lopez, Jennifer; Talik, Michal; Kuhn, Bernd
Source: check_circle
Forschungszentrum Jülich

Microstructure Stability of Ferritic-Martensitic, Austenitic and Fully Ferritic Steels Under Fluctuating Loading Conditions

2015 | Lecture/speech
SOURCE-WORK-ID: FZJ-2015-06236
Contributors: Kuhn, Bernd; Talik, Michal; Lopez Barrilao, Jennifer; Singheiser, Lorenz
Source: check_circle
Forschungszentrum Jülich

Achievements in reactive air brazing

Advanced Engineering Materials
2014 | Journal article
EID:

2-s2.0-84923139291

Contributors: Kuhn, B.; Beck, T.
Source: Self-asserted source
Prof. Dr.-Ing. Bernd Kuhn via Scopus - Elsevier
grade
Preferred source (of 2)‎
Items per page:
Page 1 of 3

Peer review (36 reviews for 17 publications/grants)

Review activity for Corrosion science. (1)
Review activity for Functional materials letters. (1)
Review activity for International journal of hydrogen energy. (3)
Review activity for Journal of alloys and compounds. (1)
Review activity for Journal of materials engineering and performance. (2)
Review activity for Journal of testing and evaluation. (1)
Review activity for Journal of the Electrochemical Society. (1)
Review activity for Materials at high temperatures. (1)
Review activity for Materials letters. (1)
Review activity for Materials science and engineering. (4)
Review activity for Materials science and technology. (3)
Review activity for Materialwissenschaft und Werkstofftechnik. (1)
Review activity for Metals. (11)
Review activity for Nuclear engineering and design. (1)
Review activity for SN Applied Sciences (1)
Review activity for Surface and coatings technology. (1)
Review activity for Tungsten. (2)