Personal information

Nanomaterials, Reactive Multilayers, Intermetallics, Shape Memory Alloys, Sputtering, Dissimilar Joining, High Entropy Alloys, Additive Manufacturing
Portugal

Biography

Ana Sofia Figueira Ramos is Assistant Professor at the Department of Mechanical Engineering (DEM) of the Faculty of Sciences and Technology of the University of Coimbra (FCTUC), since September 2019. She belongs to the Centre for Mechanical Engineering, Materials and Processes - CEMMPRE (ex CEMUC). Since April 2022 intregrates CEMMPRE board as vice-coordinator. A.S. Ramos completed her 5 year degree in Chemical Engineering by the University of Coimbra (UC) in 1994. In 1997 she finished the MSc in Materials Engineering and in 2002 she completed a PhD in Mechanical Engineering with full honour (MSc and PhD FCT studentship). Later, she received a Post-Doc grant. From June 2008 to May 2013 she was Auxiliary Researcher (Ciência 2007) at the Centre for Mechanical Engineering of UC (CEMUC). From June 2013 to September 2015 A.S. Ramos was Auxiliary Researcher under the project "MT4MOBI - Materials and Technologies for Greener Manufacturing & Products Applied to Mobility". From October 2015 to December 2018 she was FCT Post-doc fellow. From September 2017 to December 2018 she was also Invited Assistant Professor. Between January and September 2019 she was Researcher at DEM-FCTUC.
A.S. Ramos participated in several R&D projects, e.g.: PTDC/EME/TME/100990/2008 (Microbond), PTDC/CTM/69645/2006 (Nanobrazing), POCTI/CTM/55970/2004, ALMOULD G5ST-CT-2001-00403 (European Project), PRAXIS XXI 3/3.1/CTAE/1904/95. After approval-funded she conducted experiments at renowned synchrotron facilities (ESRF - European Synchrotron Research Facilities and DESY - Deutsch Electron Synchrotron). She was Principal Investigator of Project "CrackFree - Towards self-repairing metallic materials" - PTDC/CTM-CTM/29101/2017 (2018-2021). She was also the responsible at UC of the Project "NanoTiC - Nanojoining of Titanium to Ceramics" - PTDC/CTM-CTM/31579/2017 (2018-2021) leaded by the University of Porto. Currently she participates in three Mobilizing Agendas for Business Innovation within the scope of the PRR – Portuguese Recovery and Resilience Facility (DRIVOLUTION/ AM2R/ INOV.AM), being responsible at UC for two Workpackges.
A.S. Ramos edited 1 book and published 1 book chapter, 76 papers in international peer-review journals, 3 in national journals and 12 in conf. proceedings with refereeing. 69 papers were published in ISI journals, most belonging to top quartile (h index=22, Scopus). A.S. Ramos reviews papers on a regular basis (https://www.webofscience.com/wos/author/record/K-8450-2012) and has been recognized as Elsevier Reviewer. A.S. Ramos is Editorial Board Member of the MDPI journal Coatings. She was Guest Editor of "Intermetallics 2016" special issue of Metals open access journal, and currently she guest edits the "Nanoscale Multilayer Thin Films/Foils" special issue of the open access journal Coatings. AS. Ramos attended 47 International Conferences (33 oral communications from which 4 were invited, 10 posters). In September 2016 she gave a keynote lecture at PSE 2016 - 15th International Conference on Plasma Surface Engineering. She was invited to WEDB - Symposium of World Experts in Diffusion Bonding, and opened it with the oral presentation "Reaction-assisted diffusion bonding of dissimilar materials" (UK, June 2017). As co-author she has 46 oral communications and 22 posters. She was on the organizing committee of Materiais 2013 - XVI Conference of Sociedade Portuguesa dos Materiais, VII International Materials Symposium and of the International Conference Junior Euromat 2022. She is member of International Institute of Welding (IIW) Commission XVII (Brazing, Soldering and Diffusion Bonding), Commission VII (Nano and Microjoining) and European Community Joining Sub-Platform. She completed the co-supervision of 13 MSc theses and the supervision of 6 MSc, one of which the student won the 1st prize of the 2009 contest of the Portuguese Materials Society. She co-supervised a PhD student.

Activities

Employment (9)

University of Coimbra: Coimbra, PT

2019-09-01 to present | Assistant Professor (Mechanical Engineering Department)
Employment
Source: Self-asserted source
A.S. Ramos

University of Coimbra: Coimbra, PT

2019-01-01 to 2019-08-31 | PhD Researcher (Mechanical Engineering Department)
Employment
Source: Self-asserted source
A.S. Ramos

Portuguese Science and Technology Foundation: Coimbra, PT

2015-10-01 to 2018-12-31 | Post-Doc Fellowship (Mechanical Engineering Department, University of Coimbra)
Employment
Source: Self-asserted source
A.S. Ramos

University of Coimbra: Coimbra, PT

2013-06-01 to 2015-09-30 | Assistant Researcher Department (Mechanical Engineering Department)
Employment
Source: Self-asserted source
A.S. Ramos

Faculty of Sciences and Technology of University of Coimbra: Coimbra, PT

2008-06-01 to 2013-05-31 | Assistant Researcher (Mechanical Engineering Department)
Employment
Source: Self-asserted source
A.S. Ramos

Portuguese Science and Technology Foundation: Coimbra, PT

2002-06-01 to 2008-05-31 | Post-Doc Fellowship (Mechanical Engineering Department, University of Coimbra)
Employment
Source: Self-asserted source
A.S. Ramos

Instituto Pedro Nunes: Coimbra, PT

2001-08-01 to 2002-05-31 | Project Researcher
Employment
Source: Self-asserted source
A.S. Ramos

Portuguese Science and Technology Foundation: Coimbra, PT

1997-04-01 to 2001-07-31 | PhD Studentship (Mechanical Engineering Department, University of Coimbra)
Employment
Source: Self-asserted source
A.S. Ramos

Portuguese Science and Technology Foundation: Coimbra, PT

1995-01-01 to 1996-12-31 | MSc Studentship (Mechanical Engineering Department, University of Coimbra)
Employment
Source: Self-asserted source
A.S. Ramos

Education and qualifications (3)

University of Coimbra: Coimbra, PT

1997-04-01 to 2002-05-27 | PhD Mechanical Engineering, specialization in Materials Science (Mechanical Engineering Department)
Education
Source: Self-asserted source
A.S. Ramos

University of Coimbra: Coimbra, PT

1995-01-01 to 1997-03-25 | MSc Materials Engineering (Mechanical Engineering Department)
Education
Source: Self-asserted source
A.S. Ramos

University of Coimbra: Coimbra, PT

1988-10-06 to 1994-07-13 | Graduation Chemical Engineering (5 years) (Chemical Engineering Department)
Education
Source: Self-asserted source
A.S. Ramos

Funding (16)

I9LOGO - Innovation in the development and production of logos for the automotive industry

2021-03-01 to 2023-06-30 | Contract
Agência Nacional de Inovação SA (Porto, PT)
GRANT_NUMBER:

POCI-01-0247-FEDER-072607

Source: check_circle
CIÊNCIAVITAE

Highlight - New solutions for ultra high gloss injection moulds

2021-01-01 to 2023-06-30 | Contract
Agência Nacional de Inovação SA (Porto, PT)
GRANT_NUMBER:

POCI-01-0247-FEDER-047156

Source: check_circle
CIÊNCIAVITAE

Add.Powder - Development of metallic materials adapted to additive manufacturing (FDMet)

2019-08 to 2022-07 | Contract
Agência Nacional de Inovação SA (Porto, PT)
GRANT_NUMBER:

CENTRO-01-0247-FEDER-039910

Source: check_circle
CIÊNCIAVITAE

CrackFree - Towards self-repairing metallic materials

2018-07 to present | Contract
COMPETE2020 and FCT (Lisboa, PT)
GRANT_NUMBER:

POCI-01-0145-FEFER-029101

Source: Self-asserted source
A.S. Ramos

NanoTiC - Nanojoining of Titanium to Ceramics

2018-07 to present | Contract
COMPETE2020 and FCT (Lisboa, PT)
Part of GRANT_NUMBER:

POCI-01-0145-FEFER-031579

Source: Self-asserted source
A.S. Ramos

Challenges in joining of titanium alloys

2016-01 to 2017-12 | Grant
Fundação para a Ciência e a Tecnologia (Lisbon, PT)
GRANT_NUMBER:

PT-SL 3365

Source: check_circle
CIÊNCIAVITAE

Towards self-healing in metallic alloys

2015-10 to 2018-12 | Grant
FCT - Fundação para a Ciência e a Tecnologia (Lisboa, PT)
Source: Self-asserted source
A.S. Ramos

MT4MOBI - Materials and Technologies for Greener Manufacturing & Products Applied to Mobility

2013-06 to 2015-09 | Contract
European Regional Development Fund (Brussels, BE)
GRANT_NUMBER:

CENTRO-07-0224-FEDER-002001

Source: check_circle
CIÊNCIAVITAE

Joining micro to small scale systems in shape memory alloys using last generation infrared lasers

2010-01 to 2013-06 | Contract
Fundação para a Ciência e a Tecnologia (Lisbon, PT)
GRANT_NUMBER:

PTDC-EME-TME-100990-2008

Source: check_circle
CIÊNCIAVITAE

Nano-brazing of advanced materials

2007-11 to 2011-04 | Contract
Fundação para a Ciência e a Tecnologia (Lisbon, PT)
GRANT_NUMBER:

PTDC/CTM/69645/2006

Source: check_circle
CIÊNCIAVITAE

Making bridges between 2D and 3D nc-materials

2005-05 to 2008-04 | Contract
Fundação para a Ciência e a Tecnologia (Lisbon, PT)
GRANT_NUMBER:

POCTI/CTM/55970/2004

Source: check_circle
CIÊNCIAVITAE

Nanometric multilayers for joining intermetallic compounds

2002-06 to 2008-05 | Grant
FCT - Fundação para a Ciência e a Tecnologia (Lisboa, PT)
Source: Self-asserted source
A.S. Ramos

EFRIC Development of new environment friendly industrial ceramics

2001-08 to 2002-05 | Contract
European Commission (Brussels, BE)
GRANT_NUMBER:

G5ST-CT-2001-00244

Source: check_circle
CIÊNCIAVITAE

Mechanical and Chemical Behaviour of Ti-Al-(M) Thin Films

1997-04 to 2001-07 | Grant
FCT - Fundação para a Ciência e Tecnologia (Lisboa, PT)
Source: Self-asserted source
A.S. Ramos

Production of new intermetallic matrix materials for the aeronautical industry

1997 to 2010 | Contract
Fundação para a Ciência e a Tecnologia (Lisbon, PT)
GRANT_NUMBER:

PRAXIS XXI 3/3.1/CTAE/1904/95

Source: check_circle
CIÊNCIAVITAE

Production and Characterization of Ceramic/Metal Coatings

1995-01 to 1996-12 | Grant
JNICT - Junta Nacional de Investigação Científica e Tecnológica (Lisboa, PT)
Source: Self-asserted source
A.S. Ramos

Works (50 of 94)

Items per page:
Page 1 of 2

Design multifunctional Mg-Zr coatings regulating Mg alloy bioabsorption

Journal of Magnesium and Alloys
2024-04-30 | Journal article
SOURCE-WORK-ID:

cv-prod-id-4262447

Contributors: Zohra Benzarti; Sandesh Itani; Castro, Jose David; Carvalho, Sandra; Ramos, Ana Sofia; Corresponding author: Zohra Benzarti.
Source: check_circle
CIÊNCIAVITAE

Advanced medical monitoring: 3D printed prosthetics with integrated strain sensor

Progress in Additive Manufacturing
2024-04-15 | Journal article
SOURCE-WORK-ID:

cv-prod-id-4255840

Part of ISSN: 2363-9512
Part of ISSN: 2363-9520
Contributors: Resendes, Tomás; Freitas Rodrigues, Patrícia; Cruz, Francisco; Gatões, Daniel; Santos, Vítor Miguel; Ramos, Ana Sofia; Vieira, Maria Teresa
Source: check_circle
CIÊNCIAVITAE

Exploring the Influence of the Deposition Parameters on the Properties of NiTi Shape Memory Alloy Films with High Nickel Content

Coatings
2024-01-20 | Journal article
Contributors: André V. Fontes; Patrícia Freitas Rodrigues; Daniela Santo; Ana Sofia Ramos
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Powder Bed Fusion For Chemical Composition Optimization Of Tool Steels

Euro PM2023 Proceedings
2023-09-15 | Conference paper
Contributors: Francisco Cruz; Daniel Gatões; Nanci Alves; Sofia Ramos; Teresa Vieira
Source: Self-asserted source
A.S. Ramos
grade
Preferred source (of 2)‎

Searching New Solutions for NiTi Sensors through Indirect Additive Manufacturing

Materials
2022-07-19 | Journal article
Contributors: Pedro Carreira; Daniel Gatões; Nuno Alves; Ana Sofia Ramos; Maria Teresa Vieira
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Joining of Ti6Al4V to Al2O3 Using Nanomultilayers

Nanomaterials
2022-02-21 | Journal article
Contributors: Marcionilo Silva, Jr.; Ana Sofia Ramos; Maria Teresa Vieira; Sónia Simões
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Development of Actuators for Repairing Cracks by Coating W Wires with Reactive Multilayers

Materials
2022-01-24 | Journal article
Contributors: Gabriel Santos Silva; Lukasz Maj; Jerzy Morgiel; Maria Teresa Vieira; Ana Sofia Ramos
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Joining Ti6Al4V to Alumina by Diffusion Bonding Using Titanium Interlayers

Metals
2021-10-29 | Journal article
Contributors: Marcionilo Silva, Jr.; Ana S. Ramos; Sónia Simões
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Investigating a Commercial Functional Adhesive with 12-MDPB and Reactive Filler to Strengthen the Adhesive Interface in Eroded Dentin

Polymers
2021-10-15 | Journal article
Contributors: Madalena Belmar da Costa; António HS Delgado; Tomás Amorim Afonso; Luís Proença; Ana Sofia Ramos; Ana Mano Azul
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Experimental Analysis of NiTi Alloy during Strain-Controlled Low-Cycle Fatigue

Materials
2021-08-09 | Journal article
Contributors: Pedro Cunha Lima; Patrícia Freitas Rodrigues; Ana Sofia Ramos; José D. M. da Costa; Francisco Manuel Braz Fernandes; Maria Teresa Vieira
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Diffusion Bonding of Ti6Al4V to Al2O3 Using Ni/Ti Reactive Multilayers

Metals
2021-04-17 | Journal article
Contributors: Marcionilo Silva, Jr.; Ana S. Ramos; M. Teresa Vieira; Sónia Simões
Source: check_circle
Crossref
grade
Preferred source (of 3)‎

Effect of Deposition Parameters on the Reactivity of Al/Ni Multilayer Thin Films

Coatings
2020-07-23 | Journal article
Contributors: Ana Sofia Ramos; Sónia Simões; Lukasz Maj; Jerzy Morgiel; Maria Teresa Vieira
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Follow-up structural evolution of Ni/Ti reactive nano and microlayers during diffusion bonding of NiTi to Ti6Al4V in a synchrotron beamline

Journal of Materials Processing Technology
2020-01 | Journal article
Contributors: A.J. Cavaleiro; A.S. Ramos; F.M. Braz Fernandes; N. Schell; M.T. Vieira
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Characterization of ultrasonic soldering of Ti and Ni with Ni/Al reactive multilayer deposition

Welding Technology Review
2019-11-02 | Journal article
SOURCE-WORK-ID:

cv-prod-id-1276652

Part of ISSN: 2449-7959
Part of ISSN: 0033-2364
Contributors: Hodulova, Erika; Ramos, Ana S.; Kolenak, Roman; Kostolny, Igor; Simekova, Beata; Kovarikova, Ingrid
Source: check_circle
CIÊNCIAVITAE

New WC-Cu composites for the divertor in fusion reactors

Journal of Nuclear Materials
2019-08 | Journal article
Contributors: M. Dias; N. Pinhão; R. Faustino; R.M.S. Martins; A.S. Ramos; M.T. Vieira; J.B. Correia; E. Camacho; F.M. Braz Fernandes; B. Nunes et al.
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Diffusion Bonding of TiAl to Ti6Al4V Using Nanolayers

Journal of Materials Engineering and Performance
2018 | Journal article
EID:

2-s2.0-85045145140

Contributors: Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Interaction between Ni/Ti Nanomultilayers and Bulk Ti-6Al-4V during Heat Treatment

Metals
2018-10 | Journal article | Author
Contributors: André João Cavaleiro; A.S. Ramos; Francisco Braz Fernandes; Carsten Baehtz; MTVieira; Teresa Vieira; Maria Teresa Vieira
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Microstructural Characterization of Dissimilar Titanium Alloys Joints Using Ni/Al Nanolayers

Metals
2018-09 | Journal article | Author
Contributors: Sónia Simões; Filomena Viana; A.S. Ramos; M. Teresa Vieira; M.F. Vieira
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 3)‎

Coating of tungsten wire with Ni/Al multilayers for self-healing applications

Metals
2017 | Journal article
EID:

2-s2.0-85039957496

Contributors: Ramos, A.S.; Maj, L.; Morgiel, J.; Vieira, M.T.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 3)‎

Intermetallics 2016

MDPI
2017 | Edited book
SOURCE-WORK-ID:

cv-prod-id-324005

Contributors: Ramos, A.S.
Source: check_circle
CIÊNCIAVITAE

The effect of heating rate on the phase transformation of Ni/Ti multilayer thin films

Vacuum
2017 | Journal article
EID:

2-s2.0-85012110475

Contributors: Cavaleiro, A.J.; Ramos, A.S.; Martins, R.M.S.; Braz Fernandes, F.M.; Vieira, M.T.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 3)‎

TiAl diffusion bonding using Ni/Ti multilayers

Welding in the World
2017 | Journal article
EID:

2-s2.0-85031773513

Contributors: Simões, S.; Sofia Ramos, A.; Viana, F.; Teresa Vieira, M.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Intermetallics

Metals
2017-10-20 | Journal article
Contributors: Ana Sofia Ramos
Source: check_circle
Crossref

Characterization of TiAl diffusion bonds using Ni/Ti nanolayers

Microscopy and Microanalysis
2016 | Journal article
SOURCE-WORK-ID:

cv-prod-id-1276561

Contributors: Ramos, Ana Sofia
Source: check_circle
CIÊNCIAVITAE

Cold rolled versus sputtered Ni/Ti multilayers for reaction-assisted diffusion bonding

Welding in the World
2016 | Journal article
EID:

2-s2.0-84958817813

Contributors: Emadinia, O.; Simões, S.; Viana, F.; Vieira, M.F.; Cavaleiro, A.J.; Ramos, A.S.; Vieira, M.T.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Joining of TiAl to steel by diffusion bonding with Ni/Ti reactive multilayers

Metals
2016 | Journal article
EID:

2-s2.0-84964900850

Contributors: Simões, S.; Ramos, A.S.; Viana, F.; Vieira, M.T.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 3)‎

Microstructural Characterization of Diffusion Bonds Assisted by Ni/Ti Nanolayers

Journal of Materials Engineering and Performance
2016 | Journal article
EID:

2-s2.0-84976617742

Contributors: Simões, S.; Viana, F.; Sofia Ramos, A.; Teresa Vieira, M.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Ni/Al Multilayers Produced by Accumulative Roll Bonding and Sputtering

Journal of Materials Engineering and Performance
2016 | Journal article
EID:

2-s2.0-84983468917

Contributors: Simões, S.; Ramos, A.S.; Viana, F.; Emadinia, O.; Vieira, M.T.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Reaction-assisted diffusion bonding of TiAl alloy to steel

Materials Chemistry and Physics
2016 | Journal article
EID:

2-s2.0-84957848888

Contributors: Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Characterization of nanolayers at TiAl diffusion bonds

Microscopy and Microanalysis
2015 | Journal article
SOURCE-WORK-ID:

cv-prod-id-2424475

Contributors: S. Simões; F. Viana; A.S. Ramos; M.T. Vieira; M.F. Vieira
Source: check_circle
CIÊNCIAVITAE

NiTi Wires Coated by Nanomultilayers - A Solution for Self-healing?

Microscopy and Microanalysis
2015 | Journal article
EID:

2-s2.0-84944076849

Contributors: Caiano, A.; Ramos, A.S.; Vieira, M.T.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Phase transformations in Ni/Ti multilayers investigated by synchrotron radiation-based x-ray diffraction

Journal of Alloys and Compounds
2015 | Journal article
EID:

2-s2.0-84937598317

Contributors: Cavaleiro, A.J.; Ramos, A.S.; Martins, R.M.S.; Fernandes, F.M.B.; Morgiel, J.; Baehtz, C.; Vieira, M.T.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

TEM and HRTEM Characterization of TiAl Diffusion Bonds Using Ni/Al Nanolayers

Microscopy and Microanalysis
2015 | Journal article
EID:

2-s2.0-84925248499

Contributors: Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Erratum to: In Situ Phase Evolution of Ni/Ti Reactive Multilayers (J. of Materi Eng and Perform, DOI 10.1007/s11665-014-1072-y)

Journal of Materials Engineering and Performance
2014 | Journal article
EID:

2-s2.0-84957844842

Contributors: Cavaleiro, A.J.; Ramos, A.S.; Martins, R.M.S.; Baehtz, C.; Vieira, M.T.; Braz Fernandes, F.M.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier

In situ characterization of NiTi/Ti6Al4V joints during reaction-assisted diffusion bonding using Ni/Ti multilayers

Journal of Materials Engineering and Performance
2014 | Journal article
EID:

2-s2.0-84901035140

Contributors: Cavaleiro, A.J.; Ramos, A.S.; Braz Fernandes, F.M.; Schell, N.; Vieira, M.T.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

In situ phase evolution of Ni/Ti reactive multilayers

Journal of Materials Engineering and Performance
2014 | Journal article
EID:

2-s2.0-84904791376

Contributors: Cavaleiro, A.J.; Ramos, A.S.; Martins, R.M.S.; Baetz, C.; Vieira, M.T.; Braz Fernandes, F.M.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

In-situ thermal evolution of Ni/Ti multilayer thin films

Intermetallics
2014 | Journal article
EID:

2-s2.0-84897835724

Contributors: Cavaleiro, A.J.; Santos, R.J.; Ramos, A.S.; Vieira, M.T.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Thermal stability of nanoscale metallic multilayers

Thin Solid Films
2014 | Journal article
EID:

2-s2.0-84919875441

Contributors: Ramos, A.S.; Cavaleiro, A.J.; Vieira, M.T.; Morgiel, J.; Safran, G.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Reaction zone formed during diffusion bonding of TiNi to Ti6Al4V using Ni/Ti nanolayers

Journal of Materials Science
2013 | Journal article
EID:

2-s2.0-84882615206

Contributors: Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

An efficient strategy to detect latent fingermarks on metallic surfaces

Forensic Science International
2012 | Journal article
EID:

2-s2.0-84858798775

Contributors: Ramos, A.S.; Vieira, M.T.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Diffusion bonding of gamma-TiAl using modified Ti/Al nanolayers

Journal of Alloys and Compounds
2012 | Journal article
EID:

2-s2.0-84865698228

Contributors: Duarte, L.I.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Leinenbach, C.; Klotz, U.E.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Intermetallic compound formation in Pd/Al multilayer thin films

Intermetallics
2012 | Journal article
EID:

2-s2.0-84858112829

Contributors: Ramos, A.S.; Vieira, M.T.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Microstructure of reaction zone formed during diffusion bonding of TiAl with Ni/Al multilayer

Journal of Materials Engineering and Performance
2012 | Journal article
EID:

2-s2.0-84862186284

Contributors: Simões, S.; Viana, F.; Koç Ak, M.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Anisothermal solid-state reactions of Ni/Al nanometric multilayers

Intermetallics
2011 | Journal article
EID:

2-s2.0-78650519283

Contributors: Simões, S.; Viana, F.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Diffusion bonding of TiAl alloys to steel using Ni/Al nanolayers

International Congress on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems
2011 | Conference paper
SOURCE-WORK-ID:

cv-prod-id-2425690

Contributors: S. Simões; F. Viana; A.S. Ramos; M.T. Vieira; M.F. Vieira
Source: check_circle
CIÊNCIAVITAE

Diffusion bonding of TiAl using reactive Ni/Al nanolayers and Ti and Ni foils

Materials Chemistry and Physics
2011 | Journal article
EID:

2-s2.0-79955841436

Contributors: Simões, S.; Viana, F.; Koak, M.; Ramos, A.S.; Vieira, M.T.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

A corrosion study of nanocrystalline copper thin films

Corrosion Science
2010 | Journal article
EID:

2-s2.0-77957676072

Contributors: Pinto, E.M.; Ramos, A.S.; Vieira, M.T.; Brett, C.M.A.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Developments in diffusion bonding and brazing of advanced materials

Proc. of the Int. Conf. on Advances in Welding Science and Technology for Construction, Energy and Transportation, AWST 2010, held in Conj. with the 63rd Annual Assembly of IIW 2010
2010 | Conference paper
EID:

2-s2.0-79952591929

Contributors: Vieira, M.F.; Vieira, M.T.; Ramos, A.S.; Simões, S.; Viana, F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Diffusion bonding of TiAl using Ni/Al multilayers

Journal of Materials Science
2010 | Journal article
EID:

2-s2.0-77955473677

Contributors: Simões, S.; Viana, F.; Ventzke, V.; Koçak, M.; Sofia Ramos, A.; Teresa Vieira, M.; Vieira, M.F.
Source: Self-asserted source
A.S. Ramos via Scopus - Elsevier
grade
Preferred source (of 2)‎

Reaction-assisted diffusion bonding of advanced materials

Defect and Diffusion Forum
2010 | Journal article
EID:

2-s2.0-77952304218

Source: Self-asserted source
A.S. Ramos
grade
Preferred source (of 3)‎
Items per page:
Page 1 of 2