Personal information

Verified email addresses

Verified email domains

Sweden

Biography

After studying and working at the universities in Istanbul, Munich, Berlin, Berkeley, and Ghent, November 2020, B. E. Abali joined the faculty as professor at Uppsala University in Sweden. A rigorous scientific and teaching expertise he has obtained over the years as a consequence of working and lecturing in several continents. Among others, he has sponsored courses in mechanics, composite materials, numerical methods, and multiphysics simulations. His first research monograph has been published in Springer entitled as Computational Reality, presenting thermodynamical derivation of coupled phenomena involving thermomechanics with electromagnetism in solid bodies and fluids as well as their computation via the finite element method with the aid of open-source codes developed under the FEniCS project.

Activities

Employment (8)

Uppsala University: Uppsala, SE

2020-11-01 to present | Associate Professor (Department of Materials Science and Engineering)
Employment
Source: Self-asserted source
Bilen Emek Abali

University of Natural Resources and Life Sciences: Vienna, AT

2019-09-15 to 2021-08-31 | Senior Researcher (Structural Engineering)
Employment
Source: Self-asserted source
Bilen Emek Abali

Technische Universität Berlin: Berlin, Berlin, DE

2020-09-16 to 2021-02-28 | Senior Researcher (Institut of Mechanics)
Employment
Source: Self-asserted source
Bilen Emek Abali

Ghent University: Ghent, BE

2019-09-15 to 2020-09-15 | Affiliated Researcher (Structural Engineering)
Employment
Source: Self-asserted source
Bilen Emek Abali

Technische Universität Berlin: Berlin, DE

2017-08-01 to 2019-09-15 | Postdoctoral Associate (Institute of Mechanics)
Employment
Source: Self-asserted source
Bilen Emek Abali

University of California Berkeley: Berkeley, CA, US

2016-08-01 to 2017-07-31 | Postdoctoral Fellow (Department of Mechanical Engineering)
Employment
Source: Self-asserted source
Bilen Emek Abali

Technische Universität Berlin: Berlin, DE

2014-05-01 to 2016-07-31 | Postdoctoral Associate (Institute of Mechanics)
Employment
Source: Self-asserted source
Bilen Emek Abali

Technische Universität Berlin: Berlin, DE

2009-02-09 to 2014-02-08 | Teaching and Research Assistant (Institute of Mechanics)
Employment
Source: Self-asserted source
Bilen Emek Abali

Education and qualifications (5)

Uppsala University: Uppsala, SE

2021-06-01 | Docent in Engineering Science (Faculty of Science and Technology)
Qualification
Source: Self-asserted source
Bilen Emek Abali

Technische Universität Berlin: Berlin, Berlin, DE

2014-05-01 to 2019-07-10 | Habilitation (Institute of Mechanics)
Qualification
Source: Self-asserted source
Bilen Emek Abali

Technische Universität Berlin: Berlin, Berlin, DE

2009-02-09 to 2014-02-14 | Dr.-Ing. (Ph.D) (Institute of Mechanics, Chair of Continuum Mechanics and Materials Theorie)
Education
Source: Self-asserted source
Bilen Emek Abali

Technische Universitat Munchen: Munchen, Bayern, DE

2006-10-16 to 2008-08-04 | M.Sc. (Institute of Mechanics, Chair of Computational Mechanics)
Education
Source: Self-asserted source
Bilen Emek Abali

Istanbul Teknik Universitesi: Istanbul, TR

2001-09-15 to 2006-02-08 | B.Sc. (Institute of Mechanics, Chair of Mechanics and Materials Theorie)
Education
Source: Self-asserted source
Bilen Emek Abali

Professional activities (4)

ISIMM, The International Society for the Interaction of Mechanics and Mathematics: Berlin, DE

Member
Membership
Source: Self-asserted source
Bilen Emek Abali

IACM, International Association for Computational Mechanics: Barcelona, ES

Member
Membership
Source: Self-asserted source
Bilen Emek Abali

GACM, German Association for Computational Mechanics: Hanover, DE

Member
Membership
Source: Self-asserted source
Bilen Emek Abali

DHV, Deutscher Hochschulverband: Bonn, DE

Member
Membership
Source: Self-asserted source
Bilen Emek Abali

Funding (5)

Multiphysics fracture modeling of batteries across length scales aiming for increasing lifetime and charging capacity

2023-10 to 2027-10 | Grant
Swedish Energy Agency (Eskilstuna, SE)
Source: Self-asserted source
Bilen Emek Abali

Additively manufactured multiscale materials

2021-06 to 2024-06 | Grant
Uppsala University (Uppsala, SE)
Source: Self-asserted source
Bilen Emek Abali

Multiphysics Computation of Li-Ion Batteries

2018-03 to 2020-03 | Grant
Daimler und Benz Stiftung (Ladenburg, DE)
GRANT_NUMBER: 0
Source: Self-asserted source
Bilen Emek Abali

Mechanochemistry of Advanced Anode Designs in Li-Ion Batteries

2017-05 to 2020-05 | Grant
Deutsche Forschungsgemeinschaft (Bonn, DE)
Part of GRANT_NUMBER: DFG - MU 1752/47
Source: Self-asserted source
Bilen Emek Abali

Evaluation of the continuum-to-continuum multiscale approach in a moving frame

Source: Self-asserted source
Bilen Emek Abali

Works (50 of 62)

Items per page:
Page 1 of 2

An experimental methodology to determine damage mechanics parameters for phase-field approach simulations using material extrusion-based additively manufactured tensile specimens

Virtual and Physical Prototyping
2025-12-31 | Journal article
Contributors: Mario Álvarez-Blanco; B. Emek Abali; Christina Völlmecke
Source: check_circle
Crossref

Multiphysics simulation of crystal growth with moving boundaries in FEniCS

Computer Methods in Applied Mechanics and Engineering
2025-03 | Journal article
Contributors: Arved Wintzer; Bilen Emek Abali; Kaspars Dadzis
Source: check_circle
Crossref

Digital twin of surface acoustic wave transceivers for a computational design of an optimal wave guiding layer thickness

Computational Mechanics
2025-01 | Journal article
Contributors: Ufuk Tan Baler; Ali Fethi Okyar; Bilen Emek Abali
Source: check_circle
Crossref

Damage Behavior in Additive Manufacturing based on Infill Pattern and Density with Carbon Particle Filled PolyLactic Acid (CF-PLA) Polymer Filaments

2024 | Book chapter
Contributors: Bilen Emek Abali; Reza Afshar; Nima Khaksar; Daniel Segersten; Ture Vedin
Source: check_circle
Crossref

Investigating the Morphology of a Free-Falling Jet with an Accurate Finite Element and Level Set Modeling

Fluids
2024-11-10 | Journal article
Contributors: Yiming Liu; Hua Yang; Bilen Emek Abali; Wolfgang H. Müller
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Multiphysics simulation of two-phase viscous fluid flow steered by electric field for jetting of microdroplets

International Journal of Multiphase Flow
2024-06 | Journal article
Contributors: Yiming Liu; Bilen Emek Abali; Wolfgang H. Müller
Source: check_circle
Crossref

Energy based methods applied in mechanics by using the extended Noether's formalism

ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
2023-12 | Journal article
Contributors: Bilen Emek Abali
Source: check_circle
Crossref

Sensitivity of a homogeneous and isotropic second‐gradient continuum model for particle‐based materials with respect to uncertainties

ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
2023-10 | Journal article
Contributors: Gabriele La Valle; Bilen Emek Abali; Giovanni Falsone; Christian Soize
Source: check_circle
Crossref

Nonlinear Material Modeling for Mechanical Characterization of 3-D Printed PLA Polymer With Different Infill Densities

Applied Composite Materials
2023-06 | Journal article
Contributors: Reza Afshar; Simon Jeanne; Bilen Emek Abali
Source: check_circle
Crossref

Thermo-mechano-chemical modeling and computation of thermosetting polymers used in post-installed fastening systems in concrete structures

Continuum Mechanics and Thermodynamics
2023-05 | Journal article
Contributors: Bilen Emek Abali; Jan Vorel; Roman Wan-Wendner
Source: check_circle
Crossref

The study of diffuse interface propagation of dynamic failure in advanced ceramics using the phase-field approach

Computer Methods in Applied Mechanics and Engineering
2023-02 | Journal article
Contributors: Benhour Amirian; Bilen Emek Abali; James David Hogan
Source: check_circle
Crossref

Towards Self-Reinforced PLA Composites for Fused Filament Fabrication

Applied Sciences
2023-02 | Journal article | Author
Contributors: Neha Yadav; Tim Richter; Oliver Loeschke; Bilen Emek Abali; Dietmar Auhl; Christina Völlmecke
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Mortar cure-dependent effects on adhesive anchor systems loaded in tension

Construction and Building Materials
2023-01 | Journal article
Contributors: Stefan Meißl; Krešimir Ninčević; Bilen Emek Abali; Roman Wan-Wendner
Source: check_circle
Crossref

Plate capacitor problem as a benchmark case for verifying the finite element implementation

Continuum Mechanics and Thermodynamics
2023-01 | Journal article
Contributors: Yiming Liu; Bilen Emek Abali; Hua Yang; Wolfgang H. Müller
Source: check_circle
Crossref

Correction to: Theoretical Analyses, Computations, and Experiments of Multiscale Materials

2022 | Book chapter
Contributors: Ivan Giorgio; Luca Placidi; Emilio Barchiesi; Bilen Emek Abali; Holm Altenbach
Source: check_circle
Crossref

A benchmark strain gradient elasticity solution in two-dimensions for verifying computational approaches by means of the finite element method

Mathematics and Mechanics of Solids
2022-10 | Journal article
Contributors: Navid Shekarchizadeh; Bilen Emek Abali; Alberto Maria Bersani
Source: check_circle
Crossref

Experimental analysis on metamaterials boundary layers by means of a pantographic structure under large deformations

Mechanics Research Communications
2022-10 | Journal article
Contributors: Marco Laudato; Luca Manzari; Peter Göransson; Ivan Giorgio; Bilen Emek Abali
Source: check_circle
Crossref

Investigating infill density and pattern effects in additive manufacturing by characterizing metamaterials along the strain-gradient theory

Mathematics and Mechanics of Solids
2022-10 | Journal article
Contributors: Gokhan Aydin; B Cagri Sarar; M Erden Yildizdag; B Emek Abali
Source: check_circle
Crossref

Phase-field approach to evolution and interaction of twins in single crystal magnesium

Computational Mechanics
2022-10 | Journal article
Contributors: Benhour Amirian; Hossein Jafarzadeh; Bilen Emek Abali; Alessandro Reali; James David Hogan
Source: check_circle
Crossref

Thermodynamically-consistent derivation and computation of twinning and fracture in brittle materials by means of phase-field approaches in the finite element method

International Journal of Solids and Structures
2022-10 | Journal article
Contributors: Benhour Amirian; Hossein Jafarzadeh; Bilen Emek Abali; Alessandro Reali; James David Hogan
Source: check_circle
Crossref

Influence of microstructure on size effect for metamaterials applied in composite structures

Mechanics Research Communications
2022-06 | Journal article
Contributors: Bilen Emek Abali; Bozo Vazic; Pania Newell
Source: check_circle
Crossref

Verification of asymptotic homogenization method developed for periodic architected materials in strain gradient continuum

International Journal of Solids and Structures
2022-03 | Journal article
Contributors: Hua Yang; B. Emek Abali; Wolfgang H. Müller; Salma Barboura; Jia Li
Source: check_circle
Crossref

Exploring the Role of Manufacturing Parameters on Microstructure and Mechanical Properties in Fused Deposition Modeling (FDM) Using PETG

Applied Composite Materials
2021-12 | Journal article
Contributors: Arda Özen; Bilen Emek Abali; Christina Völlmecke; Jonathan Gerstel; Dietmar Auhl
Source: check_circle
Crossref

Parameter identification of a second-gradient model for the description of pantographic structures in dynamic regime

Zeitschrift für angewandte Mathematik und Physik
2021-12 | Journal article
Contributors: Navid Shekarchizadeh; Marco Laudato; Luca Manzari; Bilen Emek Abali; Ivan Giorgio; Alberto Maria Bersani
Source: check_circle
Crossref

Verification of strain gradient elasticity computation by analytical solutions

ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
2021-12 | Journal article
Contributors: Hua Yang; Dmitry Timofeev; B. Emek Abali; Baotong Li; Wolfgang H. Müller
Source: check_circle
Crossref

Experimental investigation for modeling the hardening of thermosetting polymers during curing

Polymer Testing
2021-10 | Journal article
Contributors: Bilen Emek Abali; Mert Yücel Yardımcı; Michele Zecchini; Gilda Daissè; Flávio H. Marchesini; Geert De Schutter; Roman Wan-Wendner
Source: check_circle
Crossref

A novel phase‐field approach to brittle damage mechanics of gradient metamaterials combining action formalism and history variable

ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
2021-09 | Journal article
Contributors: Bilen Emek Abali; Andre Klunker; Emilio Barchiesi; Luca Placidi
Source: check_circle
Crossref

Inverse analysis of metamaterials and parameter determination by means of an automatized optimization problem

ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
2021-08 | Journal article
Contributors: Navid Shekarchizadeh; Bilen Emek Abali; Emilio Barchiesi; Alberto Maria Bersani
Source: check_circle
Crossref

Additive manufacturing introduced substructure and computational determination of metamaterials parameters by means of the asymptotic homogenization

Continuum Mechanics and Thermodynamics
2021-07-30 | Journal article
Contributors: Bilen Emek Abali; Emilio Barchiesi
Source: check_circle
Crossref

Cure Kinetics and Inverse Analysis of Epoxy-Amine Based Adhesive Used for Fastening Systems

Materials
2021-07-09 | Journal article
Contributors: Bilen Emek Abali; Michele Zecchini; Gilda Daissè; Ivana Czabany; Wolfgang Gindl-Altmutter; Roman Wan-Wendner
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Optimization of Manufacturing Parameters and Tensile Specimen Geometry for Fused Deposition Modeling (FDM) 3D-Printed PETG

Materials
2021-05-14 | Journal article
Contributors: Arda Özen; Dietmar Auhl; Christina Völlmecke; Josef Kiendl; Bilen Emek Abali
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Experimental validation of computational fluid dynamics for solving isothermal and incompressible viscous fluid flow

SN Applied Sciences
2020-09 | Journal article
Contributors: Bilen Emek Abali; Ömer Savaş
Source: check_circle
Crossref

Determination of metamaterial parameters by means of a homogenization approach based on asymptotic analysis

Continuum Mechanics and Thermodynamics
2020-09-19 | Journal article
Contributors: Hua Yang; Bilen Emek Abali; Dmitry Timofeev; Wolfgang H. Müller
Source: check_circle
Crossref

Verification of deforming polarized structure computation by using a closed-form solution

Continuum Mechanics and Thermodynamics
2020-05-14 | Journal article
Contributors: B. Emek Abali; Felix A. Reich
Source: check_circle
Crossref

Multiphysics computation of thermal tissue damage as a consequence of electric power absorption

Computational Mechanics
2020-01-22 | Journal article
Contributors: B. Emek Abali; Tarek I. Zohdi
Source: check_circle
Crossref

Effect of Core Nanostructure on the Thermomechanical Properties of Soft Nanoparticles

Chemistry of Materials
2020-01-14 | Journal article
Contributors: Ernesto Rafael Osorio-Blanco; Julian Bergueiro; Bilen Emek Abali; Svenja Ehrmann; Christoph Böttcher; Alejandro J. Müller; José Luis Cuéllar-Camacho; Marcelo Calderón
Source: check_circle
Crossref

Thin‐layer inertial effects in plasticity and dynamics in the Prandtl problem

ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik
2019-12 | Journal article
Contributors: D. V. Georgievskii; W. H. Müller; B. E. Abali
Source: check_circle
Crossref

Theory and computation of electromagnetic fields and thermomechanical structure interaction for systems undergoing large deformations

Journal of Computational Physics
2019-10 | Journal article
Contributors: B.E. Abali; A.F. Queiruga
Source: check_circle
Crossref

Revealing the physical insight of a length-scale parameter in metamaterials by exploiting the variational formulation

Continuum Mechanics and Thermodynamics
2019-07-13 | Journal article
Contributors: B. Emek Abali
Source: check_circle
Crossref

Numerical identification of constitutive parameters in reduced-order bi-dimensional models for pantographic structures: application to out-of-plane buckling

Archive of Applied Mechanics
2019-07-03 | Journal article
Contributors: Michele De Angelo; Emilio Barchiesi; Ivan Giorgio; B. Emek Abali
Source: check_circle
Crossref

An Accurate Finite Element Method for the Numerical Solution of Isothermal and Incompressible Flow of Viscous Fluid

Fluids
2019-01 | Journal article | Author
Contributors: Bilen Emek Abali
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Modeling of power transmission and stress grading for corona protection

Computational Mechanics
2018-09-12 | Journal article
Contributors: T. I. Zohdi; B. E. Abali
Source: check_circle
Crossref

Inverse Analysis of Cellulose by Using the Energy-Based Method and a Rotational Rheometer

Applied Sciences
2018-08 | Journal article
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Material characterization and computations of a polymeric metamaterial with a pantographic substructure

Zeitschrift für angewandte Mathematik und Physik
2018-08 | Journal article
Contributors: Hua Yang; Gregor Ganzosch; Ivan Giorgio; B. Emek Abali
Source: check_circle
Crossref

On the accuracy of reduced-order integrated circuit simulators for computing the heat production on electronic components

Journal of Computational Electronics
2018-06-23 | Journal article
Contributors: B. Emek Abali; Tarek I. Zohdi
Source: check_circle
Crossref

Computational study for reliability improvement of a circuit board

Mechanics of Advanced Materials and Modern Processes
2017-12 | Journal article
Contributors: B. Emek Abali
Source: check_circle
Crossref

Theory and computation of higher gradient elasticity theories based on action principles

Archive of Applied Mechanics
2017-09-05 | Journal article
Contributors: B. Emek Abali; Wolfgang H. Müller; Francesco dell’Isola
Source: check_circle
Crossref

An energy-based method to determine material constants in nonlinear rheology with applications

Continuum Mechanics and Thermodynamics
2016 | Journal article
EID:

2-s2.0-84940093115

Contributors: Abali, B.E.; Wu, C.-C.; Müller, W.H.
Source: Self-asserted source
Bilen Emek Abali via Scopus - Elsevier

Computational Reality

Source: Self-asserted source
Bilen Emek Abali

Numerical modeling of thermoelectric coupling

3rd ECCOMAS Young Investigators Conference
2015 | Conference paper
Source: Self-asserted source
Bilen Emek Abali
Items per page:
Page 1 of 2

Peer review (243 reviews for 51 publications/grants)

Review activity for Acta mechanica. (3)
Review activity for Additive manufacturing. (2)
Review activity for Advances in mathematical physics. (1)
Review activity for Applied composite materials. (28)
Review activity for Applied mathematics and computation. (2)
Review activity for Applied sciences. (3)
Review activity for Archive of applied mechanics. (6)
Review activity for Archives of Mechanics. (1)
Review activity for Biomedical engineering online (12)
Review activity for Composites and advanced materials. (1)
Review activity for Computational mechanics. (8)
Review activity for Computer methods in applied mechanics and engineering. (9)
Review activity for Computer methods in applied mechanics and engineering. (2)
Review activity for Continuum mechanics and thermodynamics. (20)
Review activity for Continuum mechanics and thermodynamics. (38)
Review activity for European journal of mechanics. (5)
Review activity for Finite elements in analysis and design. (1)
Review activity for IEEE transactions on circuits and systems. (2)
Review activity for Instruments. (1)
Review activity for International journal of hydrogen energy. (2)
Review activity for International journal of pressure vessels and piping. (3)
Review activity for International journal of solids and structures. (2)
Review activity for International journal of solids and structures. (1)
Review activity for Journal of applied polymer science. (2)
Review activity for Journal of applied polymer science. (1)
Review activity for Journal of manufacturing and materials processing. (1)
Review activity for Journal of petroleum exploration and production technology. (4)
Review activity for Journal of the Australian Ceramic Society. (2)
Review activity for Journal of the Australian Ceramic Society. (4)
Review activity for Journal of Theoretical and Applied Mechanics. (2)
Review activity for Materials and design. (2)
Review activity for Materials. (6)
Review activity for Mathematical and computational applications. (2)
Review activity for Mathematics and mechanics of complex systems. (1)
Review activity for Mathematics and mechanics of solids (17)
Review activity for Mathematics. (2)
Review activity for Mechanics research communications. (2)
Review activity for Medical engineering & physics. (1)
Review activity for Micromachines. (1)
Review activity for Ocean engineering. (3)
Review activity for Physics of fluids. (1)
Review activity for Polymer engineering and science. (2)
Review activity for Proceedings of the Institution of Mechanical Engineers. (1)
Review activity for Prosthesis (1)
Review activity for Research in nondestructive evaluation. (1)
Review activity for Sensors. (1)
Review activity for SN Applied Sciences (13)
Review activity for Symmetry. (1)
Review activity for The aeronautical journal. (5)
Review activity for Wave motion. (2)
Review activity for Zeitschrift für angewandte Mathematik und Mechanik. (9)