Personal information

Activities

Collapse all

Employment (1)

Iran University of Science and Technology: Tehran, Tehran, IR

Assistant professor (School of Metallurgy and Materials Engineering)
Employment
Source: Self-asserted source
Salehi, M.

Works (18)

Investigation on nanocrystallization, thermal stability and hardness of amorphous Al86Cu6Y6Co2 alloy

Journal of Thermal Analysis and Calorimetry
2025-01-19 | Journal article
DOI: 10.1007/s10973-024-13948-1
Contributors: M. Salehi; S. G. Shabestari; M. Dadashi
Source: check_circle
Crossref

Microstructure, mechanical properties and bio-corrosion behavior of Mg–2Zn-0.3Ca-x (x= 0, 0.5, 1.0) Y alloys

Journal of Materials Research and Technology
2024-07 | Journal article
DOI: 10.1016/j.jmrt.2024.06.121
Contributors: F. Mozaffari; M. Salehi; S.G. Shabestari
Source: check_circle
Crossref

Investigation of the Effect of Sub-rapid Solidification Processes on the Microstructure and Mechanical Properties of Al86Cu6Co2Y6 (at.%) Alloy

Journal of Materials Engineering and Performance
2023-12-19 | Journal article
DOI: 10.1007/s11665-023-09051-5
Part of ISSN: 1059-9495
Part of ISSN: 1544-1024
Contributors: Moein G. Shabestari; M. Salehi
Source: Self-asserted source
Salehi, M.

Mechanical Properties of Ultrafine-Structured Al-Si-Mg Alloy Produced by Hot Consolidation of Rapidly Solidified Flakes

Journal of Materials Engineering and Performance
2023-10-02 | Journal article
DOI: 10.1007/s11665-023-08745-0
Part of ISSN: 1059-9495
Part of ISSN: 1544-1024
Contributors: M. Golmohammadi; M. Salehi; H. Saghafian
Source: Self-asserted source
Salehi, M.

The Effects of Rapid Solidification on the Microstructure and Mechanical Properties of Al5083

Iranian Journal of Materials Science and Engineering
2023-06 | Journal article
DOI: 10.22068/ijmse.3178
Contributors: Maryam Salehi; Milad Dadashi; S. Parsa Kashani Sani
Source: Self-asserted source
Salehi, M.

Microstructural evaluation and mechanical properties of bulk nanostructured Al86Cu6Y6La2 (at.%) alloy produced by hot consolidation of amorphous melt-spun flakes

Journal of Non-Crystalline Solids
2023-01 | Journal article
DOI: 10.1016/j.jnoncrysol.2022.122032
Contributors: M. Dadashi; M. Salehi; S.G. Shabestari
Source: check_circle
Crossref

Preparation, characterization, and photocatalytic degradation of methylene blue of SnO2/RGO nanocomposite produced by facile hydrothermal process

Journal of the Korean Ceramic Society
2022-09 | Journal article
DOI: 10.1007/s43207-022-00210-3
Contributors: S. Moghaddas; M. Salehi; S. Bagheri-Kazemabad
Source: check_circle
Crossref

Nanostructure evolution, thermal stability and hardness of amorphous Al–Cu-Y (Co, La) (at.%) alloys

Journal of Non-Crystalline Solids
2022-08 | Journal article
DOI: 10.1016/j.jnoncrysol.2022.121663
Contributors: M. Salehi; S.G. Shabestari
Source: check_circle
Crossref

Impact strength and structural refinementof A380 aluminum alloy produced through gas-induced semi-solid process and Sr addition

Trans. Nonferrous Met. Soc. China
2022-05-01 | Journal article
DOI: 10.1016/S1003-6326(22)65882-5
Contributors: Salehi, M.
Source: Self-asserted source
Salehi, M.

Nano-Devitrification and Structural Evolution of Rapidly Solidified Amorphous Al-TM (Cu-Co)-Y (at.%) Alloy

Journal of Ultrafine Grained and Nanostructured Materials
2021-12 | Journal article
DOI: 10.22059/jufgnsm.2021.02.03
Source: Self-asserted source
Salehi, M.

Microstructure and mechanical properties of Al 5083 alloy produced by rapid solidification

Founding Research Journal
2021-12-01 | Journal article
DOI: 10.22034/FRJ.2021.291894.1136
Source: Self-asserted source
Salehi, M.

Nanocrystallization and mechanical properties of rapidly solidified amorphous Al<inf>86</inf>Ni<inf>6</inf>Y<inf>6</inf>Ce<inf>2</inf> (at.%) alloy

Advanced Materials Research
2014 | Book
DOI: 10.4028/www.scientific.net/AMR.829.20
EID:

2-s2.0-84891499305
Contributors: Salehi, M.; Shabestari, S.G.; Boutorabi, S.M.A.
Source: Self-asserted source
Salehi, M. via Scopus - Elsevier

Nanostructure and Mechanical Properties of Bulk Al<inf>86</inf>Ni<inf>6</inf>Y<inf>6</inf>Ce<inf>2</inf> Alloy Produced by Hot Consolidation of Amorphous Melt-Spun Flakes

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014 | Journal article
DOI: 10.1007/s11661-014-2542-4
EID:

2-s2.0-84919665025
Contributors: Salehi, M.; Shabestari, S.G.; Boutorabi, S.M.A.
Source: Self-asserted source
Salehi, M. via Scopus - Elsevier

Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology

Journal of Ultrafine Grained and Nanostructured Materials
2014-06-01 | Journal article
DOI: 10.7508/JUFGNSM.2014.01.005
Source: Self-asserted source
Salehi, M.

Nano-crystal development and thermal stability of amorphous Al-Ni-Y-Ce alloy

Journal of Non-Crystalline Solids
2013 | Journal article
DOI: 10.1016/j.jnoncrysol.2013.04.059
EID:

2-s2.0-84879063405
Contributors: Salehi, M.; Shabestari, S.G.; Boutorabi, S.M.A.
Source: Self-asserted source
Salehi, M. via Scopus - Elsevier

Nanostructure evolution and mechanical properties of rapidly solidified Al3Ni3RE (Y, Ce) alloys

Materials Science and Engineering A
2013 | Journal article
DOI: 10.1016/j.msea.2013.08.040
EID:

2-s2.0-84883613981
Contributors: Salehi, M.; Shabestari, S.G.; Boutorabi, S.M.A.
Source: Self-asserted source
Salehi, M. via Scopus - Elsevier

Comparing the melt-spun nanostructured aluminum 6061 foils with conventional direct chill ingot

Materials Science and Engineering A
2008 | Journal article
DOI: 10.1016/j.msea.2007.12.017
EID:

2-s2.0-44949204500
Contributors: Dehghani, K.; Salehi, M.; Salehi, M.; Aboutalebi, H.
Source: Self-asserted source
Salehi, M. via Scopus - Elsevier

Structure and properties of nanostructured aluminum A413.1 produced by melt spinning compared with ingot microstructure

Journal of Alloys and Compounds
2008 | Journal article
DOI: 10.1016/j.jallcom.2007.03.117
EID:

2-s2.0-42649145879
Contributors: Salehi, M.; Dehghani, K.
Source: Self-asserted source
Salehi, M. via Scopus - Elsevier

Peer review (12 reviews for 3 publications/grants)

Review activity for Journal of alloys and compounds. (9)
Review activity for Materials today communications. (1)
Review activity for Results in engineering. (2)
How many people are using ORCID?