Personal information

Gas Turbine, Fluid Mechanics, Heat Transfer
Türkiye

Activities

Employment (1)

KIRIKKALE UNIVERSITY: KIRIKKALE, TR

1998-09-29 to present | Prof. (MECHANICAL ENGINEERING)
Employment
Source: Self-asserted source
Yahya Doğu

Education and qualifications (2)

Rensselaer Polytechnic Institute: Troy, NY, US

1994-01-01 to 1998-05-01 | Ph.D. (Dept. of Mechanical Engineering)
Education
Source: Self-asserted source
Yahya Doğu

Istanbul Technical University: Istanbul, TR

1989-09-21 to 1992-12-19 | M.Sc. (Mechanical Engineering Department)
Education
Source: Self-asserted source
Yahya Doğu

Works (32)

Experimental investigation of effects of single and mixed alternative fuels (gasoline, CNG, LPG, acetone, naphthalene, and boron derivatives) on a commercial i-DSI engine

Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
2024-12-31 | Journal article
Contributors: Yahya Doğu; Ahmet Alper Yontar; Emrah Kantaroğlu
Source: check_circle
Crossref

Ağır Silah Namlusunun Mekanik Otofretaj İşleminde Gerilme Dağılımının Sayısal Olarak İncelenmesi

Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi
2023-10-07 | Journal article
Contributors: Doğan BARAN; Osman BİCAN; Yahya DOĞU
Source: check_circle
Crossref

Influence of acetone addition into gasoline for i-DSI engine

Sādhanā
2022-03 | Journal article
Contributors: Emrah Kantaroğlu; Ahmet Alper Yontar; Yahya Doğu
Source: check_circle
Crossref

Investigation of Flow Behavior and Porous Medium Resistance Coefficients for Metallic-Cloth Fibers

Fibers
2020-12-07 | Journal article
Contributors: Erdem Gorgun; Yahya Dogu; Mahmut Faruk Aksit
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Design and cfd analysis of a 150kw 8-stage orc-rot (organic rankine cycle-radial outflow turbine) and performance degradation due to blade tip clearance of labyrinth seal

Proceedings of the ASME Turbo Expo
2018 | Conference paper
EID:

2-s2.0-85053863675

Contributors: Doǧu, Y.; Günaydin, I.; Kiliçaslan, Z.; Ileri, T.; Soǧanci, S.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Experimental and numerical investigation of effects of CNG and gasoline fuels on engine performance and emissions in a dual sequential spark ignition engine

Energy Sources, Part A: Recovery, Utilization and Environmental Effects
2018 | Journal article
EID:

2-s2.0-85049806246

Contributors: Yontar, A.A.; Doğu, Y.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier
grade
Preferred source (of 2)‎

Flow Resistance Coefficients of Porous Brush Seal as a Function of Pressure Load

Journal of Engineering for Gas Turbines and Power
2018 | Journal article
EID:

2-s2.0-85047841538

Contributors: Doǧu, Y.; Sertçakan, M.C.; Gezer, K.; Kocagül, M.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Investigation of the effects of gasoline and CNG fuels on a dual sequential ignition engine at low and high load conditions

Fuel
2018 | Journal article
EID:

2-s2.0-85047773596

Contributors: Yontar, A.A.; Doğu, Y.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Flow resistance coefficients of porous brush seal as a function of pressure load

Proceedings of the ASME Turbo Expo
2017 | Conference paper
EID:

2-s2.0-85029117326

Contributors: Doǧu, Y.; Sertçakan, M.C.; Gezer, K.; Kocagül, M.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Labyrinth seal leakage degradation due to various types of wear

Journal of Engineering for Gas Turbines and Power
2017 | Journal article
EID:

2-s2.0-85026876362

Contributors: Dogu, Y.; Sertçakan, M.C.; Gezer, K.; Kocagül, M.; Arican, E.; Ozmusul, M.S.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Leakage degradation of straight labyrinth seal due to wear of round tooth tip and acute trapezoidal rub-groove

Journal of Engineering for Gas Turbines and Power
2017 | Journal article
EID:

2-s2.0-85026868647

Contributors: Dogu, Y.; Sertçakan, M.C.; Gezer, K.; Kocagül, M.; Arican, E.; Ozmusul, M.S.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

1-D modelling comparative study to evaluate performance and emissions of a spark ignition engine fuelled with gasoline and LNG

MATEC Web of Conferences
2016 | Conference paper
EID:

2-s2.0-84996524174

Contributors: Yontar, A.A.; Doǧu, Y.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Computational fluid dynamics investigation of brush seal leakage performance depending on geometric dimensions and operating conditions

Journal of Engineering for Gas Turbines and Power
2016 | Journal article
EID:

2-s2.0-84944048818

Contributors: Dogu, Y.; Bahar, A.S.; Sertcakan, M.C.; Piskin, A.; Arican, E.; Kocagul, M.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Computational Fluid Dynamics Investigation of Labyrinth Seal Leakage Performance Depending on Mushroom-Shaped Tooth Wear

Journal of Engineering for Gas Turbines and Power
2016 | Journal article
EID:

2-s2.0-84942859872

Contributors: Dogu, Y.; Sertçakan, M.C.; Bahar, A.S.; Pişkin, A.; Arican, E.; Kocagül, M.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Labyrinth seal leakage degradation due to various types of wear

Proceedings of the ASME Turbo Expo
2016 | Conference paper
EID:

2-s2.0-84991676970

Contributors: Dogu, Y.; Sertçakan, M.C.; Gezer, K.; Kocagöl, M.; Arican, E.; Ozmusul, M.S.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Leakage degradation of straight labyrinth seal due to wear of round tooth tip and acute trapezoidal rub-groove

Proceedings of the ASME Turbo Expo
2016 | Conference paper
EID:

2-s2.0-84991738270

Contributors: Dogu, Y.; Sertçakan, M.C.; Gezer, K.; Kocagöl, M.; Arican, E.; Ozmusul, M.S.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

A simple FEM model for foil bearings under differential pressure

American Society of Mechanical Engineers, Tribology Division, TRIB
2010 | Conference paper
EID:

2-s2.0-80054770590

Contributors: Aksoy, S.; Aksit, M.F.; Dogu, Y.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Evaluation of flow behavior for clearance brush seals

Journal of Engineering for Gas Turbines and Power
2008 | Journal article
EID:

2-s2.0-42149136839

Contributors: Dogu, Y.; Aksit, M.F.; Demiroglu, M.; Dinc, O.S.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Oil temperature analysis of brush seals

2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007
2008 | Conference paper
EID:

2-s2.0-43349083438

Contributors: Duran, E.T.; Aksit, M.F.; Dogu, Y.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

A numerical model to determine temperature distribution in orthogonal metal cutting

Journal of Materials Processing Technology
2006 | Journal article
EID:

2-s2.0-29144472009

Contributors: Dogu, Y.; Aslan, E.; Camuscu, N.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

An investigation of pressure stiffness coupling in brush seals

Proceedings of the 11th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-11
2006 | Conference paper
EID:

2-s2.0-84866899807

Contributors: Aksit, M.F.; Dogu, Y.; Kandemir, I.; Kizil, H.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Brush seal temperature distribution analysis

Journal of Engineering for Gas Turbines and Power
2006 | Journal article
EID:

2-s2.0-33746146402

Contributors: Dogu, Y.; Aksit, M.F.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Effect of shear heat on hydrodynamic lift of brush seals in oil sealing

Collection of Technical Papers - AIAA/ASME/SAE/ASEE 42nd Joint Propulsion Conference
2006 | Conference paper
EID:

2-s2.0-34249282001

Contributors: Duran, E.T.; Aksit, M.F.; Dogu, Y.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Effects of geometry on brush seal pressure and flow fields - Part I: Front plate configurations

Journal of Turbomachinery
2006 | Journal article
EID:

2-s2.0-33745250123

Contributors: Dogu, Y.; Aksit, M.F.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Effects of geometry on brush seal pressure and flow fields - Part II: Backing plate configurations

Journal of Turbomachinery
2006 | Journal article
EID:

2-s2.0-33745271877

Contributors: Dogu, Y.; Aksit, M.F.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Brush seal temperature distribution analysis

Proceedings of the ASME Turbo Expo
2005 | Conference paper
EID:

2-s2.0-27744569103

Contributors: Dogu, Y.; Aksit, M.F.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Investigation of brush seal flow characteristics using bulk porous medium approach

Journal of Engineering for Gas Turbines and Power
2005 | Journal article
EID:

2-s2.0-15044345048

Contributors: Dogu, Y.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Evaluation of brush seal performance for oil sealing applications

39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit
2003 | Conference paper
EID:

2-s2.0-84897814273

Contributors: Aksit, M.; Bhate, N.; Bouchard, C.; Demiroglu, M.; Dogu, Y.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Investigation of brush seal flow characteristics using bulk porous medium approach

American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI
2003 | Conference paper
EID:

2-s2.0-0348217727

Contributors: Dogu, Y.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Thermal and flow analysis of cloth-seal in slot for gas turbine shroud applications

34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit
1998 | Conference paper
EID:

2-s2.0-84963813018

Contributors: Dogu, Y.; Aksit, M.; Bagepalli, B.; Burns, J.; Sexton, B.; Kellock, I.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Asymmetric glass temperature due to cold-spots on the furnace wall in the optical fiber drawing process

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD
1997 | Conference paper
EID:

2-s2.0-0031345697

Contributors: Dogu, Y.; Kaminski, D.A.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier

Effects of eccentricity on glass temperatures in the neck-down stage of the optical fiber drawing process

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD
1997 | Conference paper
EID:

2-s2.0-0031340934

Contributors: Dogu, Y.; Kaminski, D.A.
Source: Self-asserted source
Yahya Doğu via Scopus - Elsevier