Personal information

Websites & social links

Ideko

Other IDs

Scopus Author ID: 16046979400

Countries

Spain

Activities

Collapse all

Employment (4)

IDEKO Research Center: Elgoibar, ES

2020 to present | ICT and Automation Department (Head of Department)
Employment
Source: Self-asserted source
Iñigo Bediaga

IDEKO Reseach Center: Elgoibar, ES

2016 to 2020 | Project Manager (ICT and Automation Dept)
Employment
Source: Self-asserted source
Iñigo Bediaga

IDEKO Research Center: Elgoibar, ES

2010 to 2016 | Project Manager (Dynamics and Control Dept.)
Employment
Source: Self-asserted source
Iñigo Bediaga

IDEKO Research Center: Elgoibar, ES

2002 to 2010 | Junior Researcher (Dynamics and Control Dept.)
Employment
Source: Self-asserted source
Iñigo Bediaga

Education and qualifications (2)

University of the Basque Country: Leioa, ES

2003 to 2009 | PhD. Dr. Mechanical Engineering (Faculty of Engineering Bilbao)
Qualification
Source: Self-asserted source
Iñigo Bediaga

University of Deusto: Bilbao, País Vasco, ES

1996 to 2002 | M.Sc. Industrial Automation and Electronics Engineering
Qualification
Source: Self-asserted source
Iñigo Bediaga

Professional activities (1)

Werkzeugmaschinenlabor der RWTH Aachen: Aachen, Nordrhein-Westfalen, DE

2010 to 2010 | Invited Post-Doctoral stage (Machine Tools )
Invited position
Source: Self-asserted source
Iñigo Bediaga

Works (34)

End-to-End Methodology for Predictive Maintenance Based on Fingerprint Routines and Anomaly Detection for Machine Tool Rotary Components

Journal of Manufacturing and Materials Processing
2025-01-03 | Journal article
DOI: 10.3390/jmmp9010012
Contributors: Amaia Arregi; Aitor Barrutia; Iñigo Bediaga
Source: check_circle
Crossref

Assessing Industrial Communication Protocols to Bridge the Gap between Machine Tools and Software Monitoring

Sensors
2023 | Journal article
DOI: 10.3390/s23125694
Part of ISSN: 1424-8220
Contributors: Tapia, Endika; Sastoque-Pinilla, Leonardo; Lopez-Novoa, Unai; Bediaga, Iñigo; López de Lacalle, Norberto
Source: Self-asserted source
Iñigo Bediaga

Vibration Analysis for Rotatory Elements Wear Detection in Paper Mill Machine

Communications in Computer and Information Science
2022 | Book chapter | Author
DOI: 10.1007/978-3-031-14343-4_19
Part of ISBN: 9783031143427
Part of ISBN: 9783031143434
Part of ISSN: 1865-0929
Part of ISSN: 1865-0937
Contributors: Amaia Arregi; IÑAKI INZA CANO; Iñigo Bediaga
Source: Self-asserted source
Iñigo Bediaga
grade
Preferred source (of 2)‎

VIRTUAL COMMISSIONING IN MACHINE TOOL MANUFACTURING: A SURVEY FROM INDUSTRY

DYNA
2021-11-01 | Journal article
DOI: 10.6036/10244
Part of ISSN: 1989-1490
Contributors: Miriam Ugarte Querejeta; LEIRE ETXEBERRIA ELORZA; Sagardui, G; Gorka Unamuno; IÑIGO BEDIAGA ESCUDERO
Source: Self-asserted source
Iñigo Bediaga

Hybrid Edge–Cloud-Based Smart System for Chatter Suppression in Train Wheel Repair

Applied Sciences
2019-10-12 | Journal article
DOI: 10.3390/app9204283
Part of ISSN: 2076-3417
Source: Self-asserted source
Iñigo Bediaga

Monitoring and analytics platform for machine tools

2018-04-18 | Conference paper
HAL: hal-01901110
Contributors: Xavier Beudaert; Jon Argandoña; Jerome Loc'H; Iñigo Bediaga; Jokin Munoa
Source: Self-asserted source
Iñigo Bediaga via HAL

In-Process Tool Wear Monitoring in Internal Broaching

2016-07-12 | Conference paper
HAL: hal-01353881
Contributors: Iñigo Bediaga; Christian Ramirez; Kepa Huerta; Christian Krella; Jokin Munoa
Source: Self-asserted source
Iñigo Bediaga via HAL

Implicit subspace iteration as an efficient method to compute milling stability lobe diagrams

The International Journal of Advanced Manufacturing Technology
2015-03 | Journal article
DOI: 10.1007/s00170-014-6470-7
Part of ISSN: 0268-3768
Part of ISSN: 1433-3015
Source: Self-asserted source
Iñigo Bediaga

Continuous variable feed rate: a novel method for improving infeed grinding processes

The International Journal of Advanced Manufacturing Technology
2014-07 | Journal article
DOI: 10.1007/s00170-014-5771-1
Part of ISSN: 0268-3768
Part of ISSN: 1433-3015
Source: Self-asserted source
Iñigo Bediaga

An integrated system for machine tool spindle head ball bearing fault detection and diagnosis

IEEE Instrumentation and Measurement Magazine
2013 | Journal article
DOI:

10.1109/MIM.2013.6495681
Contributors: Bediaga, I.; Etxaniz, I.; Mendizabal, X.; Munoa, J.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Ball bearing damage detection using traditional signal processing algorithms

IEEE Instrumentation and Measurement Magazine
2013 | Journal article
DOI:

10.1109/MIM.2013.6495676
Contributors: Arnaiz, A.; Bediaga, I.; Mendizabal, X.; Munoa, J.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Application of continuous spindle speed variation for chatter avoidance in roughing millingg

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
2011 | Journal article
DOI:

10.1177/2041297510394075
Contributors: Bediaga, I.; Lizarralde, R.; Muñoa, J.; Zatarain, M.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Effectiveness of continuous workpiece speed variation (CWSV) for chatter avoidance in throughfeed centerless grinding

International Journal of Machine Tools and Manufacture
2011 | Journal article
DOI:

10.1016/j.ijmachtools.2011.08.005
Contributors: Barrenetxea, D.; Bediaga, I.; Gallego, I.; Marquínez, J.I.; Álvarez, J.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Analysis of directional factors in milling: Importance of multi-frequency calculation and of the inclusion of the effect of the helix angle

International Journal of Advanced Manufacturing Technology
2010 | Journal article
DOI:

10.1007/s00170-009-2230-5
Contributors: Bediaga, I.; Insperger, T.; Muñoa, J.; Zatarain, M.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

An automatic spindle speed selection strategy to obtain stability in high-speed milling

International Journal of Machine Tools and Manufacture
2009 | Journal article
DOI:

10.1016/j.ijmachtools.2008.12.003
Contributors: Bediaga, I.; Hernández, J.; López de Lacalle, L.N.; Muñoa, J.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Continuous workpiece speed variation (CWSV): Model based practical application to avoid chatter in grinding

CIRP Annals - Manufacturing Technology
2009 | Journal article
DOI:

10.1016/j.cirp.2009.03.047
Contributors: Barrenetxea, D.; Bediaga, I.; Marquinez, J.I.; Uriarte, L.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Obtención de un corte estable en fresado a alta velocidad con una estrategia de regulación automática de la velocidad de giro

IMHE
2009 | Journal article
HAL: hal-01278396
Contributors: Iñigo Bediaga; Jokin Munoa; Javier Hernandez; Luis Norberto López de Lacalle
Source: Self-asserted source
Iñigo Bediaga via HAL

Analysis of Stability of Structural Modes in Milling Processes

2009-06-18 | Conference paper
HAL: hal-01022865
Contributors: Iñigo Bediaga; Mikel Zatarain; Jokin Munoa; Oier Zelaieta
Source: Self-asserted source
Iñigo Bediaga via HAL

Application of continuous spindle speed variation for chatter avoidance in milling. Optimisation of speed variation parameters

2008 | Conference paper
HAL: hal-01271076
Contributors: Iñigo Bediaga; Mikel Zatarain; Jokin Munoa; Rafael Lizarralde; Luis Norberto López de Lacalle
Source: Self-asserted source
Iñigo Bediaga via HAL

Stability of milling processes with continuous spindle speed variation: Analysis in the frequency and time domains, and experimental correlation

CIRP Annals - Manufacturing Technology
2008 | Journal article
DOI:

10.1016/j.cirp.2008.03.067
Contributors: Bediaga, I.; Lizarralde, R.; Muñoa, J.; Zatarain, M.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Aumento de la disponibilidad de máquina mediante el diagnóstico automático del estado de los rodamientos

2008-10-17 | Conference paper
HAL: hal-01623787
Contributors: Borja Gómez; Iñigo Bediaga; Javier Hernandez; Angel M Mendia
Source: Self-asserted source
Iñigo Bediaga via HAL

Estrategia de regulación automática de la velocidad de giro para la obtención de un corte estable en fresado a alta velocidad

2008-10-17 | Conference paper
HAL: hal-01221675
Contributors: Iñigo Bediaga; Jokin Munoa; Javier Hernandez; Luis Norberto Lopez de Lacalle
Source: Self-asserted source
Iñigo Bediaga via HAL

Influencia del ángulo de hélice en la estabilidad de procesos de fresado

2006 | Conference paper
HAL: hal-01075313
Contributors: Iñigo Bediaga; Mikel Zatarain; Jokin Munoa; Gregoire Peigné; Tamás Insperger
Source: Self-asserted source
Iñigo Bediaga via HAL

Reducción de la Inestabilidad en Cortes Interrumpidos en Fresado a Alta Velocidad mediante Variación de la Velocidad del Husillo

2006 | Conference paper
HAL: hal-01261543
Contributors: Iñigo Bediaga; Igor Egaña; Jokin Munoa
Source: Self-asserted source
Iñigo Bediaga via HAL

Determination of the Cutting Performance and Dynamic Behaviour of Universal Milling Machines by means of a Stability Model

2006-09-20 | Conference paper
HAL: hal-01071153
Contributors: Jokin Munoa; Mikel Zatarain; Iñigo Bediaga
Source: Self-asserted source
Iñigo Bediaga via HAL

Stability study of the milling process using an exponential force model in frequency domain

2006-06 | Conference paper
HAL: hal-01068124
Contributors: Jokin Munoa; Mikel Zatarain; Iñigo Bediaga; Grégoire Peigne
Source: Self-asserted source
Iñigo Bediaga via HAL

Automatic fault detection and diagnosis implementation based on intelligent approaches

IEEE Symposium on Emerging Technologies and Factory Automation, ETFA
2005 | Journal article
EID: 2-s2.0-33847264822
Contributors: Bediaga, I.; Fernández, A.; Gastón, A.; González, L.; Hernández, J.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Computer model for simulating and optimizing milling process

EUROCON 2005 - The International Conference on Computer as a Tool
2005 | Journal article
EID: 2-s2.0-33947318091
Contributors: Bediaga, I.; Egaña, I.; Muñoa, J.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Computer Model for Simulating and Optimizing Milling Process

2005 | Conference paper
HAL: hal-01069710
Contributors: Iñigo Bediaga; Jokin Munoa; Igor Egana
Source: Self-asserted source
Iñigo Bediaga via HAL

Evaluation study on detection techniques for bearing incipient faults

EUROCON 2005 - The International Conference on Computer as a Tool
2005 | Journal article
EID: 2-s2.0-33947328415
Contributors: Bediaga, I.; Fernández, A.; Gastón, A.; Hernández, J.
Source: Self-asserted source
Iñigo Bediaga via Scopus - Elsevier

Time and Frequency Domain Models for Chatter Prediction in Milling

2005 | Book chapter
HAL: hal-01057533
Contributors: Iñigo Bediaga; Igor Egana; Jokin Munoa
Source: Self-asserted source
Iñigo Bediaga via HAL

Optimization of Hard Material Roughing by means of a Stability Model

2005-05 | Conference paper
HAL: hal-01052558
Contributors: Jokin Munoa; Mikel Zatarain; Iñigo Bediaga; Rafael Lizarralde
Source: Self-asserted source
Iñigo Bediaga via HAL

Comparative Analysis of Spindle Speed Variation Techniques in Milling

2004-11-06 | Conference paper
HAL: hal-01015861
Contributors: Iñigo Bediaga; Javier Hernández; Jokin Munoa; Ramon Uribe-Etxeberria
Source: Self-asserted source
Iñigo Bediaga via HAL

Influencia de las Técnicas de Variación de Velocidad de Cabezal en la Estabilidad del Proceso de Fresado: Estudio Comparativo

2004-10-22 | Conference paper
HAL: hal-01030805
Contributors: Iñigo Bediaga; Javier Hernández; Jokin Munoa; Ramon Uribe-Etxeberria
Source: Self-asserted source
Iñigo Bediaga via HAL
How many people are using ORCID?