Personal information

Biography

Dr. Piyush P. Gohil is working as Associate Professor in Mechanical Engineering Department at Faculty of Technology & Engineering, The M S University of Baroda, Vadodara (Gujarat), He did his Ph.D. in August- 2010 from SVNIT-Surat (Gujarat) INDIA. Dr. Gohils area of research includes Design, Manufacturing and Tribology of Composites. He is a life member of ISTE, TSI, ISAMPE, FRP Institute and annual member of SAE. He has guided 04 PhD students and 04 are pursuing, also guided 35 ME/M.Tech Dissertations. He has more than 70 research papers in referred journals, national & international conferences. He has also published 05 book chapters in reputed publishers like SPRINGER, ACME etc. and also Edited one conference proceeding and one thematic journal issue. He has delivered more than 30 expert lectures in various faculty development programmes and many expert lectures to student community. He is acting as reviewer in many national and international journals of SAGE, SPRINGER, ELSEVIER, INDERSCIECE publishers in his area of research. He has completed two MODROB projects of AICTE-New Delhi INDIA. He has also received research project grants from DST Delhi and GUJCOST Gandhingar. He was awarded travel grants as a Young Scientist from DST INDIA in March 2011 for Malaysia & under UGC Merged scheme in March 2015 for London. Dr. Gohil is also acting as External Expert BOS member at BVM, CHRUSAT. He is also a part of various national level body at AICTE committee.

Activities

Employment (1)

Maharaja Sayajirao University of Baroda Faculty of Technology and Engineering: Vadodara, Gujarat, IN

2013-11-30 to present | ASSOCIATE PROFESSOR (MECHANICAL ENGINEERING)
Employment
Source: Self-asserted source
PIYUSH GOHIL

Education and qualifications (1)

Sardar Vallabhbhai National Institute of Technology: Surat, Gujarat, IN

2005-07-01 to 2010-08-10 | PHD MECHANICAL (MECHANICAL ENGINEERING)
Education
Source: Self-asserted source
PIYUSH GOHIL

Works (27)

Design, analysis and development of prosthetic and orthotic elements by additive manufacturing process

International Journal of Lightweight Materials and Manufacture
2025-03 | Journal article
Contributors: Piyush Patel; Piyush Gohil
Source: check_circle
Crossref

Enhancing Mechanical and Thermal Properties of Jute-Polyester Composites Through Filler Modification

2024 | Book chapter
Contributors: Vijay Parmar; Sagar Chokshi; Piyush Gohil; Vijaykumar Chaudhary
Source: check_circle
Crossref

Optimization of reinforcement ratio and stirring speed on mechanical properties of Al-TiB2-B4C hybrid composite using Taguchi – grey relational analysis

Materials Research Express
2024-12-01 | Journal article
Contributors: Sheetal Soni; Piyush Gohil
Source: check_circle
Crossref

Experimental investigations on high speed drilling of unidirectional GFRP composites

International Journal on Interactive Design and Manufacturing (IJIDeM)
2024-08-08 | Journal article
Contributors: Ashish B. Chaudhari; Piyush P. Gohil; Vijaykumar Chaudhary
Source: check_circle
Crossref

Tensile strength prediction of natural fiber and natural fiber yarn: Strain rate variation upshot

Materials Today: Proceedings
2020-02 | Journal article
Contributors: Sagar Chokshi; Piyush Gohil; Amul Lalakiya; Parth Patel; Amit Parmar
Source: check_circle
Crossref

An overview of diversified reinforcement on aluminum metal matrix composites: Tribological aspects

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
2017 | Journal article
EID:

2-s2.0-85011884932

Contributors: Mistry, J.M.; Gohil, P.P.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Experimental investigation and prediction of wear behavior of cotton fiber polyester composites

Friction
2017 | Journal article
EID:

2-s2.0-85019352714

Contributors: Parikh, H.H.; Gohil, P.P.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Effect of bamboo hybridization and staking sequence on mechanical behavior of bamboo-glass hybrid composite

Green Approaches to Biocomposite Materials Science and Engineering
2016 | Book
EID:

2-s2.0-85014312605

Contributors: Gohil, P.P.; Patel, K.; Chaudhary, V.; Ramjiyani, R.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Investigations on Drilling of Bidirectional Cotton Polyester Composite

Materials and Manufacturing Processes
2016 | Journal article
EID:

2-s2.0-84951872552

Contributors: Chaudhary, V.; Gohil, P.P.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Composites as TRIBO materials in engineering systems: Significance and applications

Processing Techniques and Tribological Behavior of Composite Materials
2015 | Book
EID:

2-s2.0-84946106530

Contributors: Parikh, H.H.; Gohil, P.P.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Development of potential composites through natural fiber reinforcement

Journal of Scientific and Industrial Research
2015 | Journal article
EID:

2-s2.0-84922471905

Contributors: Chaudhary, V.; Gohil, P.P.; Shaikh, A.A.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Investigation on Drilling of Banana Fibre Reinforced Composites

Proceedings of the 2nd International Conference on Civil, Materials and Environmental Sciences
2015 | Conference paper
Contributors: Kundan Patel; Vijaykumar Chaudhary; Piyush P. Gohil; Keval Patel
Source: Self-asserted source
PIYUSH GOHIL via Crossref Metadata Search

Modeling of Mechanical Properties and Morphological Analysis of Glass Fiber Nylon 6 Composite

Proceedings of the 2nd International Conference on Civil, Materials and Environmental Sciences
2015 | Conference paper
Contributors: Piyush P. Gohil; Jitendra M. Mistry; Vijay P. Chaudhary
Source: Self-asserted source
PIYUSH GOHIL via Crossref Metadata Search

Natural fiber-reinforced composites: Potential, applications, and properties

Agricultural Biomass Based Potential Materials
2015 | Book
EID:

2-s2.0-84944226563

Contributors: Gohil, P.P.; Chaudhary, V.; Shaikh, A.A.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Tribology of fiber reinforced polymer matrix composites - A review

Journal of Reinforced Plastics and Composites
2015 | Journal article
EID:

2-s2.0-84938261898

Contributors: Parikh, H.H.; Gohil, P.P.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Strength characterization of fibers and fibrous materials: Experimental-reliability based novel approach

Materials and Design
2013 | Journal article
EID:

2-s2.0-84877318695

Contributors: Gohil, P.P.; Shaikh, A.A.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier
grade
Preferred source (of 2)‎

Investigations of Friction and Wear in Pultruded Glass Fibre Epoxy Composites

Proceedings of International Conference on Advances in Tribology and Engineering Systems
2013-10 | Other
Contributors: Piyush P. Gohil; Hiral H. Parikh; Vimal B. Patel
Source: Self-asserted source
PIYUSH GOHIL via Crossref Metadata Search

Cotton-epoxy composites: Development and mechanical characterization

Key Engineering Materials
2011 | Book
EID:

2-s2.0-79952943941

Contributors: Gohil, P.P.; Shaikh, A.A.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier
grade
Preferred source (of 2)‎

Analytical investigation and comparative assessment of interphase influence on elastic behavior of fiber reinforced composites

Journal of Reinforced Plastics and Composites
2010 | Journal article
EID:

2-s2.0-77949376311

Contributors: Gohil, P.P.; Shaikh, A.A.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Experimental investigation and micro mechanics assessment for longitudinal elastic modulus in unidirectional cotton-polyester composites

International Journal of Engineering and Technology
2010 | Journal article
EID:

2-s2.0-84859998578

Contributors: Gohil, P.P.; Shaikh, A.A.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Modelling and vibration analysis of a road profile measuring system

International Journal of Automotive and Mechanical Engineering
2010 | Journal article
EID:

2-s2.0-84875406377

Contributors: Patel, C.B.; Gohil, P.P.; Borhade, B.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Transverse elastic modulus in unidirectional fiber reinforced composites: Modeling with varying interphase using numerical integration

International Journal of Nanomechanics Science and Technology
2010 | Journal article
EID:

2-s2.0-78751608201

Contributors: Gohil, P.P.; Shaikh, A.A.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier
grade
Preferred source (of 2)‎

UNIDIRECTIONAL BANANA-EPOXY-REINFORCED COMPOSITE: EXPERIMENTATION AND THEORETICAL ESTIMATION

Comp Mech Comput Appl Int J
2010 | Journal article
Contributors: A. A. Shaikh; Piyush P. Gohil
Source: Self-asserted source
PIYUSH GOHIL via Crossref Metadata Search

Experimental Evaluation for Mechanical Property of Unidirectional Banana Reinforced Polyester Composites

AMR
2010-08 | Journal article
Contributors: Piyush P. Gohil; A.A. Shaikh
Source: Self-asserted source
PIYUSH GOHIL via Crossref Metadata Search

Simulation of three-roller bending process using ANN: A parametric study

International Journal of Manufacturing Research
2009 | Journal article
EID:

2-s2.0-67649598660

Contributors: Gandhi, A.H.; Gohil, P.P.; Raval, H.K.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

To study the effect of surface roughness and embedded length in steel-polyester composite

Journal of Reinforced Plastics and Composites
2009 | Journal article
EID:

2-s2.0-59549103756

Contributors: Gohil, P.P.; Shaikh, A.A.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier

Performance assessment of multi-cylinder engine using CNG

Energy Conversion and Resources 2005
2005 | Conference paper
EID:

2-s2.0-33645679082

Contributors: Mistry, C.S.; Gohil, P.P.; Sharma, D.M.
Source: Self-asserted source
PIYUSH GOHIL via Scopus - Elsevier
grade
Preferred source (of 2)‎