Personal information

Verified email domains

Numerical simulation, Secondary steelmaking, Continuous Casting, Physical modeling, Metallurgy
Slovakia

Activities

Employment (1)

Technical University of Košice: Košice, SK

doc. Ing., PhD./ docent (INSTITUTE OF METALLURGY)
Employment
Source: Self-asserted source
Peter Demeter

Education and qualifications (1)

Technical University of Košice: Košice, SK

2009-10-01 to present | doc. Ing., PhD./ docent (INSTITUTE OF METALLURGY)
Education
Source: Self-asserted source
Peter Demeter

Works (44)

Numerical and Physical Modeling of Steel Flow Behavior in the Two Strand Tundish During Nonconventional Pouring Conditions

Archives of Foundry Engineering
2024-12-30 | Journal article
Contributors: A. Cwudziński; B. Bul'ko; P. Demeter
Source: check_circle
Crossref

Influence of Casting on Two Strands in Three-Strand Tundish on Length of Transient Areas

2024-09-02 | Conference paper
Contributors: Peter Šmigura; Branislav Buľko; Peter Demeter; Dominik Dubec; Jaroslav Demeter; Lukáš Fogaraš; Slavomír Hubatka
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

New-Generation Materials for Hydrogen Storage in Medium-Entropy Alloys

Materials
2024-06-13 | Journal article
Contributors: Dagmara Varcholová; Katarína Kušnírová; Lenka Oroszová; Jens Möllmer; Marcus Lange; Katarína Gáborová; Branislav Buľko; Peter Demeter; Karel Saksl
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

An Overview Analysis of Current Research Status in Iron Oxides Reduction by Hydrogen

Metals
2024-05-17 | Journal article
Contributors: Zuzana Miškovičová; Jaroslav Legemza; Peter Demeter; Branislav Buľko; Slavomír Hubatka; Martina Hrubovčáková; Peter Futáš; Róbert Findorák
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Preface of the 30th International Scientific Conference on Modern Metallurgy—Iron and Steelmaking 2023

2024-04-29 | Conference paper
Contributors: Branislav Buľko; Dana Baricová; Peter Demeter; Róbert Dzurňák
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Statement of Peer Review

2024-04-29 | Conference paper
Contributors: Branislav Buľko; Dana Baricová; Peter Demeter; Róbert Dzurňák
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

The Benefits of Using an Advanced Material for Production of Spherical Impact Pad for Tundish

2024-04-04 | Conference paper
Contributors: Branislav Buľko; Peter Demeter; Ivan Priesol; Slavomír Hubatka; Lukáš Fogaraš; Jaroslav Demeter; Martina Hrubovčáková; Andrii Pylypenko; Dominik Dubec; Dagmara Varcholová et al.
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

The Impact of Implementing Carbon Border Adjustment Mechanisms on the Steel Industry until 2034: A Forecasting Study

2024-03-12 | Conference paper
Contributors: Slavomír Hubatka; Branislav Buľko; Dana Baricová; Lukáš Fogaraš; Andrii Pylypenko; Dominik Dubec; Jaroslav Demeter; Peter Demeter
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Optimizing Pig Iron Desulfurization Using Physics-Informed Neural Networks (PINNs)

2024-02-21 | Conference paper
Contributors: Andrii Pylypenko; Peter Demeter; Branislav Buľko; Slavomír Hubatka; Lukáš Fogaraš; Jaroslav Legemza; Jaroslav Demeter
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Evaluation of Factors Affecting the MgO–C Refractory Lining Degradation in a Basic Oxygen Furnace

Applied Sciences
2023-11-18 | Journal article
Contributors: Jaroslav Demeter; Branislav Buľko; Peter Demeter; Martina Hrubovčáková
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Rudomain Iron Ore Treatment by High-Temperature Reduction

Applied Sciences
2023-09-26 | Journal article
Contributors: Jaroslav Legemza; Róbert Findorák; Dana Baricová; Branislav Buľko; Peter Demeter; Slavomír Hubatka; Kostyantyn Karamanits
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Deep Steel Desulfurization Practice

Transactions of the Indian Institute of Metals
2022-11 | Journal article
Contributors: Branislav Buľko; Marek Molnár; Peter Demeter; Michal Červenka; Gabriel Tréfa; Mária Mochnacká; Dana Baricová; Slavomír Hubatka; Lukáš Fogaraš; Vladimír Šabík
Source: check_circle
Crossref

The Adjustment of the Tundish Water Model of Continuous Casting

Archives of Metallurgy and Materials
2021-05-26 | Journal article
Contributors: P. Blaško; B. Bulko; J. Petrík; P. Demeter; V. Socha; L. Hanáková; P. Palfy; M. Solc; A. Vasilňáková
Source: check_circle
Crossref

Examination of Behavior from Selected Foundry Sands with Alkali Silicate-Based Inorganic Binders

Metals
2020-02-10 | Journal article
Contributors: Iveta Vasková; László Varga; Ingo Prass; Viktoria Dargai; Martin Conev; Martina Hrubovčáková; Marianna Bartošová; Branislav Buľko; Peter Demeter
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Geometric Modification of the Tundish Impact Point

Metals
2018-11 | Journal article | Author
Contributors: Branislav Buľko; Ivan Priesol; Peter Demeter; Peter Gasparovic; Dana Baricová; Martina Hrubovčáková
Source: check_circle
Multidisciplinary Digital Publishing Institute
grade
Preferred source (of 2)‎

Impact of cast speed on the occurrence of the non-metallic inclusions in steel

Acta Metallurgica Slovaca
2016 | Journal article
Source: Self-asserted source
Peter Demeter
grade
Preferred source (of 2)‎

Impact of interstitial aluminium content on occurrence of non-metallic inclusions in steel

Acta Metallurgica Slovaca
2016 | Journal article
EID:

2-s2.0-84976504176

Contributors: Rega, V.; Molnár, M.; Šolc, M.; Buľko, B.; Demeter, P.; Jusko, M.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

Impact of interstitial aluminium content on occurrence of non-metallic inclusions in steel

Acta Metallurgica Slovaca
2016 | Journal article
Source: Self-asserted source
Peter Demeter

Influence of chemical reheating at RH degasser on cleanliness of if steel grades

Acta Metallurgica Slovaca
2016 | Journal article
Source: Self-asserted source
Peter Demeter
grade
Preferred source (of 2)‎

Compressive strength of slags as a rate of their hydraulicity

International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM
2014 | Conference paper
EID:

2-s2.0-84946557803

Contributors: Pribulova, A.; Baricova, D.; Demeter, P.; Bartosova, M.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

Compressive strength of slags as a rate of their hydraulicity

International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM
2014 | Conference paper
Source: Self-asserted source
Peter Demeter

Identification of factors causing nitridation of crude steel in BOF before tapping

Acta Metallurgica Slovaca
2014 | Journal article
Source: Self-asserted source
Peter Demeter
grade
Preferred source (of 2)‎

Physical modeling of different configurations of a tundish for casting grades of steel that must satisfy stringent requirements on quality

Metallurgist
2014 | Journal article
DOI:

10.1007/11015.1573-8892

EID:

2-s2.0-84901853589

Contributors: Bul'ko, B.; Molńr, M.; Demeter, P.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

Physical Modeling of Different Configurations of a Tundish for Casting Grades of Steel that Must Satisfy Stringent Requirements on Quality

Metallurgist
2014 | Journal article
Source: Self-asserted source
Peter Demeter
grade
Preferred source (of 3)‎

The influence of slag on degradation of tundish working lining

Acta Metallurgica Slovaca
2014 | Journal article
DOI:

10.12776/ams.v20i3.357

EID:

2-s2.0-84921900432

Contributors: Buľko, B.; Demeter, P.; Havran, J.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

Influence of foundry dust on moulding mixtures quality

Metalurgija
2013 | Journal article
EID:

2-s2.0-84874545366

Contributors: Pribulová, A.; Futaš, P.; Rosová, A.; Demeter, P.; Baricová, D.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

INFLUENCE OF FOUNDRY DUST ON MOULDING MIXTURES QUALITY

Metalurgija
2013 | Journal article
Contributors: Pribulova, A.; Futas, P.; Rosova, A.; Demeter, P.; Baricova, D.
Source: check_circle
Web of Science Researcher Profile Sync

COMPACTING OF FLY DUSTS FROM CUPOLA AND ELECTRIC ARC FURNACE

Metalurgija
2012 | Journal article
Contributors: Fedorko, G.; Pribulova, A.; Futas, P.; Baricova, D.; Demeter, P.
Source: check_circle
Web of Science Researcher Profile Sync

Compacting of fly dusts from cupola and electric arc furnace,Kompaktiranje lebdeće prašine iz kupolne i elektrolučne peći

Metalurgija
2012 | Journal article
EID:

2-s2.0-80053515446

Contributors: Fedorko, G.; Pribulová, A.; Futáš, P.; Baricová, D.; Demeter, P.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

Utilizing of the metallurgical slag for production of cementless concrete mixtures

Metalurgija
2012 | Journal article
EID:

2-s2.0-84863460402

Contributors: Baricová, D.; Pribulová, A.; Demeter, P.; Buľko, B.; Rosova, A.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

Utilizing of the metallurgical slag for production of cementless concrete mixtures

Metalurgija
2012 | Journal article
Source: Self-asserted source
Peter Demeter

UTILIZING OF THE METALLURGICAL SLAG FOR PRODUCTION OF CEMENTLESS CONCRETE MIXTURES

Metalurgija
2012 | Journal article
Contributors: Baricova, D.; Pribulova, A.; Demeter, P.; Bulko, B.; Rosova, A.
Source: check_circle
Web of Science Researcher Profile Sync

Analysis of metallurgical slags utilization in the road engineering

11th International Multidisciplinary Scientific Geoconference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2011
2011 | Conference paper
EID:

2-s2.0-84890640685

Contributors: Baricova, D.; Pribulova, A.; Demeter, P.; Buľko, B.; Futas, P.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

ANALYSIS OF METALLURGICAL SLAGS UTILIZATION IN THE ROAD ENGINEERING

International Multidisciplinary Scientific GeoConference - SGEM Proceedings
2011 | Journal article
Contributors: Baricova, Dana; Pribulova, Alena; Demeter, Peter; Bul'ko, Branislav; Futas, Peter
Source: check_circle
Web of Science Researcher Profile Sync

Edyinfluence of misalignment ladle shroud on tundish residence time

Acta Metallurgica Slovaca
2011 | Journal article
EID:

2-s2.0-79955135646

Contributors: Bul'ko, B.; Kijac, J.; Demeter, P.; Demeter, J.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

New trends in utilizing of slags from ironmaking processe

10th International Multidisciplinary Scientific Geoconference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2010
2010 | Conference paper
EID:

2-s2.0-84890645349

Contributors: Baricova, D.; Demeter, P.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

NEW TRENDS IN UTILIZING OF SLAGS FROM IRONMAKING PROCESSE

International Multidisciplinary Scientific GeoConference - SGEM Proceedings
2010 | Journal article
Contributors: Baricova, Dana; Demeter, Peter
Source: check_circle
Web of Science Researcher Profile Sync

Towards influencing of the conversational agent mental state in the task of active listening

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
2010 | Book
EID:

2-s2.0-77952035153

Contributors: Ondáš, S.; Bevacqua, E.; Juhár, J.; Demeter, P.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

Experiences with cupola furnace slag using by concrete production

9th International Multidicsciplinary Scientific Geoconference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2009
2009 | Conference paper
EID:

2-s2.0-84890329877

Contributors: Demeter, P.; Baricova, D.; Pribulova, A.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

EXPERIENCES WITH CUPOLA FURNACE SLAG USING BY CONCRETE PRODUCTION

International Multidisciplinary Scientific GeoConference Proceedings SGEM
2009 | Conference paper
Contributors: Demeter, Peter; Baricova, Dana; Pribulova, Alena
Source: check_circle
Web of Science Researcher Profile Sync

Possibilities of utilization of slags from metallurgical processes

8th International Scientific Conference on Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2008
2008 | Conference paper
EID:

2-s2.0-84890256668

Contributors: Frohlichova, M.; Baricova, D.; Demeter, P.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

POSSIBILITIES OF UTILIZATION OF SLAGS FROM METALLURGICAL PROCESSES

Sgem: International Scientific Conference, Vol Ii, Conference Proceedings
2008 | Journal article
Contributors: Frohlichova, Maria; Baricova, Dana; Demeter, Peter
Source: check_circle
Web of Science Researcher Profile Sync

Utilization of ironmaking and steelmaking slags

Metalurgija
2006 | Journal article
Contributors: Mihok, L'; Demeter, P; Baricová, D; Seilerová, K
Source: check_circle
Web of Science Researcher Profile Sync

Utilization of ironmaking and steelmaking slags

Metalurgija
2006 | Journal article
EID:

2-s2.0-33744812712

Contributors: Mihok, L.; Demeter, P.; Baricová, D.; Seilerová, K.
Source: Self-asserted source
Peter Demeter via Scopus - Elsevier

Peer review (8 reviews for 3 publications/grants)

Review activity for Archives of Foundry Engineering. (1)
Review activity for Metals. (6)
Review activity for Sustainability. (1)