Personal information

Other IDs

Scopus Author ID: 57194872868
Scopus Author ID: 56230933800
Loop profile: 2578044

Activities

Collapse all

Works (24)

Influence of recycled spent abrasive particle addition on the mechanical properties of kenaf fiber-reinforced hybrid polymer composites

Matéria (Rio de Janeiro)
2025 | Journal article
DOI: 10.1590/1517-7076-rmat-2024-0877
Contributors: Vinoth Mahalingam; Anandakrishnan Veeramani; Sathish Shanmugam
Source: check_circle
Crossref

Optimization of tribological parameters of hybrid polymer composites reinforced with kenaf fibers and recycled spent abrasive particles

Matéria (Rio de Janeiro)
2025 | Journal article
DOI: 10.1590/1517-7076-rmat-2024-0941
Contributors: Vinoth Mahalingam; Anandakrishnan Veeramani; Sathish Shanmugam; Jayasankari Selvaraj
Source: check_circle
Crossref

Investigations on the Wear Behaviour and Mechanism of Mg-3Al/5.6Ti Composite under Dry Sliding

Archives of Metallurgy and Materials
2025-03-20 | Journal article
DOI: 10.24425/amm.2025.152509
Contributors: S. Sathish; V. Anandakrishnan; M. Gupta
Source: check_circle
Crossref

Wear behavior and tribo-surface characteristics of nano magnesium composites

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
2023-08-16 | Journal article
DOI: 10.1177/09544089231193908
Contributors: S Sathish; V Anandakrishnan; Manoj Gupta
Source: check_circle
Crossref

Optimization of Tribological Parameters of Pre-Positioned Wire Based Electron Beam Additive Manufactured Ti-6Al-4V Alloy

Archives of Metallurgy and Materials
2021-07-05 | Journal article
DOI: 10.24425/amm.2022.137776
Contributors: A. Manjunath; V. Anandakrishnan; S. Ramachandra; K. Parthiban; S. Sathish
Source: check_circle
Crossref

Investigation on the abrasive water jet machinability of AA2014 using SiC as abrasive

Materials Today: Proceedings
2020 | Journal article
DOI: 10.1016/j.matpr.2019.06.659
Part of ISSN: 2214-7853
Source: Self-asserted source
Sathish S

Modelling and analysis of abrasive water jet machining of AA2014 alloy with Al2O3 abrasive using fuzzy logic

Materials Today: Proceedings
2020 | Journal article
DOI: 10.1016/j.matpr.2019.06.733
Part of ISSN: 2214-7853
Source: Self-asserted source
Sathish S

Optimization of tribological behavior of magnesium metal-metal composite using pattern search and simulated annealing techniques

Materials Today: Proceedings
2020 | Journal article
DOI: 10.1016/j.matpr.2019.06.643
Part of ISSN: 2214-7853
Source: Self-asserted source
Sathish S

ANALYSIS OF WEAR BEHAVIOR OF A NOVEL MAGNESIUM METAL–METAL COMPOSITE

Surface Review and Letters
2020-10-10 | Journal article
DOI: 10.1142/S0218625X19502287
Contributors: S. SATHISH; V. ANANDAKRISHNAN; MANOJ GUPTA
Source: check_circle
Crossref

Effect of MoS2 on the Wear Behavior of Aluminium (AlMg0.5Si) Composite

Silicon
2020-06 | Journal article
DOI: 10.1007/s12633-019-00238-x
Part of ISSN: 1876-990X
Part of ISSN: 1876-9918
Source: Self-asserted source
Sathish S

Preparation and characterization of tensile and bending properties of basalt-kenaf reinforced hybrid polymer composites

International Journal of Polymer Analysis and Characterization
2020-05-18 | Journal article
DOI: 10.1080/1023666x.2020.1781480
Part of ISSN: 1023-666X
Part of ISSN: 1563-5341
Source: Self-asserted source
Sathish S

Dry sliding wear behavior of Inconel 718 additively manufactured by DMLS technique

Industrial Lubrication and Tribology
2020-01-20 | Journal article
DOI: 10.1108/ilt-08-2019-0322
Part of ISSN: 0036-8792
Part of ISSN: 0036-8792
Source: Self-asserted source
Sathish S

Optimization of Coefficient of Friction for Direct Metal Laser Sintered Inconel 718

Lecture Notes in Mechanical Engineering
2019 | Book chapter
DOI: 10.1007/978-981-13-6374-0_43
Part of ISBN: 9789811363733
Part of ISBN: 9789811363740
Part of ISSN: 2195-4356
Part of ISSN: 2195-4364
Source: Self-asserted source
Sathish S

Optimization of wear parameters of Mg-(5.6Ti+3Al)-2.5B4C composite

Industrial Lubrication and Tribology
2019-10-12 | Journal article
DOI: 10.1108/ilt-08-2019-0326
Part of ISSN: 0036-8792
Part of ISSN: 0036-8792
Source: Self-asserted source
Sathish S

Experimental Investigation and Optimization of SiC Abrasive Water Jet Machining of Aluminium Alloys

International Journal of Vehicle Structures and Systems
2018-12-28 | Journal article
DOI: 10.4273/ijvss.10.5.06
Part of ISSN: 0975-3540
Part of ISSN: 0975-3060
Source: Self-asserted source
Sathish S

Synthesis and forming behaviour of AA7075-TiC powder-metallurgy composites

Materiali in tehnologije
2018-12-20 | Journal article
DOI: 10.17222/mit.2017.189
Part of ISSN: 1580-2949
Part of ISSN: 1580-3414
Source: Self-asserted source
Sathish S

Multi Objective Optimization of Wear Behaviour of <i>In Situ</i> AA8011-ZrB<sub>2</sub> Metal Matrix Composites by Using Taguchi-Grey Analysis

Materials Science Forum
2018-08 | Journal article
DOI: 10.4028/www.scientific.net/msf.928.162
Part of ISSN: 1662-9752
Source: Self-asserted source
Sathish S

Tribological behavior of AA7075-TiC composites by powder metallurgy

Industrial Lubrication and Tribology
2018-08-13 | Journal article
DOI: 10.1108/ilt-10-2017-0312
Part of ISSN: 0036-8792
Source: Self-asserted source
Sathish S

Multi-objective Optimization of Cold Upsetting Parameters for Aluminium Metal Matrix Composites

Transactions of the Indian Institute of Metals
2018-04 | Journal article
DOI: 10.1007/s12666-017-1222-7
Part of ISSN: 0972-2815
Part of ISSN: 0975-1645
Source: Self-asserted source
Sathish S

Workability behavior of hybrid copper matrix composites synthesized by powder metallurgy technique

Mechanics and Mechanical Engineering
2017 | Journal article
Source: Self-asserted source
Sathish S

Synthesis, characterization and forming behavior of hybrid copper matrix composites produced using powder metallurgy

International Journal of Materials Research
2017-07-14 | Journal article
DOI: 10.3139/146.111510
Part of ISSN: 1862-5282
Part of ISSN: 2195-8556
Source: Self-asserted source
Sathish S

DRY SLIDING WEAR BEHAVIOR OF DIFFUSION BONDED AZ-91 MAGNESIUM ALLOY REINFORCED WITH SIC PARTICLES

JOURNAL OF ADVANCES IN CHEMISTRY
2016 | Journal article
Source: Self-asserted source
Sathish S

Optimization of welding parameters to attain maximum strength in friction stir welded AA7075 joints

Materials Testing
2016-03-02 | Journal article
DOI: 10.3139/120.110838
Part of ISSN: 0025-5300
Part of ISSN: 2195-8572
Source: Self-asserted source
Sathish S

Optimization of wear parameters of magnesium metal-metal composite using Taguchi and GA technique

Journal article
Source: Self-asserted source
Sathish S

Peer review (3 reviews for 2 publications/grants)

Review activity for IJIDEM. (1)
Review activity for Silicon. (2)
How many people are using ORCID?