Personal information

Activities

Employment (1)

Technical University of Liberec: Liberec, CZ

2014-03-01 to present | Head of Departement (Departement of Engineering Technology)
Employment
Source: Self-asserted source
Jaromír Moravec

Works (47)

Determination of Diffusion Coefficients of Nickel and Vanadium into Stainless and Duplex Steel and Titanium

Metals
2024-12-27 | Journal article
Contributors: Šárka Vávrová; Martin Švec; Jaromír Moravec; Daniel Klápště
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Creation of CCT Diagram Using Comprehensive Dilatometric Analysis of HSLA Steel S700MC

2024-11-26 | Preprint
Contributors: Jaromír Moravec; Daniel Klápště; Martin Švec
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Kinetics of Nickel Diffusion into Austenitic Stainless Steels AISI 304 and 316L and Calculation of Diffusion Coefficients

Materials
2023-10-20 | Journal article
Contributors: Šárka Bukovská; Jaromír Moravec; Martin Švec
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Comparison of the Structure, Mechanical Properties and Effect of Heat Treatment on Alloy Inconel 718 Produced by Conventional Technology and by Additive Layer Manufacturing

Materials
2023-07-31 | Journal article
Contributors: Martin Švec; Pavel Solfronk; Iva Nováková; Jiří Sobotka; Jaromír Moravec
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Tribological Behaviour of Enamel Coatings Created by a Prototype Device for Local Repair of Inorganic Surfaces

Materials
2023-01-31 | Journal article
Contributors: Miroslav Müller; Monika Hromasová; Petr Valášek; Iva Nováková; Jaromír Moravec; Milan Jelínek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Determination of Grain Growth Kinetics of S960MC Steel

Materials
2022-11-30 | Journal article
Contributors: Miloš Mičian; Martin Frátrik; Jaromír Moravec; Martin Švec
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Application of Temperature Cycles to Austenitic Steel and Study of the Residual Stresses Distribution in HAZ

Metals
2022-11-04 | Journal article
Contributors: Šárka Bukovská; Jaromír Moravec; Martin Švec; Jiří Sobotka
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Assessment of the Effect of Residual Stresses Arising in the HAZ of Welds on the Fatigue Life of S700MC Steel

Metals
2022-11-04 | Journal article
Contributors: Šárka Bukovská; Jaromír Moravec; Pavel Solfronk; Milan Pekárek
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Determination of CCT Diagram by Dilatometry Analysis of High-Strength Low-Alloy S960MC Steel

Materials
2022-07-01 | Journal article
Contributors: Jaromír Moravec; Miloš Mičian; Miloslav Málek; Martin Švec
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

The Influence of Cr Addition and Heat Treatment on Dilatometric Characteristics of Cast Fe-Al-Si Intermetallic Alloys

Manufacturing Technology
2022-02-26 | Journal article
Contributors: Věra Vodičková; Petra Pazourková Prokopčáková; Martin Švec; Pavel Hanus; Jaromír Moravec; Libor Čamek
Source: check_circle
Crossref

Assessment of the Heat Input Effect on the Distribution of Temperature Cycles in the HAZ of S460MC Welds in MAG Welding

Metals
2021-12-05 | Journal article
Contributors: Jaromír Moravec; Martin Švec; Šárka Bukovská; Jiří Sobotka
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Influence of Preheating Temperature on Changes in Properties in the HAZ during Multipass MIG Welding of Alloy AW 6061 and Possibilities of Their Restoration

Metals
2021-11-26 | Journal article
Contributors: Iva Novakova; Jaromir Moravec; Jan Novak; Pavel Solfronk
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Possibilities to Use Physical Simulations When Studying the Distribution of Residual Stresses in the HAZ of Duplex Steels Welds

Materials
2021-11-10 | Journal article
Contributors: Jaromír Moravec; Šárka Bukovská; Martin Švec; Jiří Sobotka
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of Higher Silicon Content and Heat Treatment on Structure Evolution and High-Temperature Behaviour of Fe-28Al-15Si-2Mo Alloy

Materials
2021-06-02 | Journal article
Contributors: Martin Švec; Věra Vodičková; Pavel Hanus; Petra Pazourková Prokopčáková; Libor Čamek; Jaromír Moravec
Source: check_circle
Crossref

Assessment the Partial Welding Influences on Fatigue Life of S700MC Steel Fillet Welds

Metals
2021-02-16 | Journal article
Contributors: Jaromir Moravec; Jiri Sobotka; Iva Novakova; Sarka Bukovska
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Experiments and Numerical Simulations of the Annealing Temperature Influence on the Residual Stresses Level in S700MC Steel Welded Elements

Materials
2020-11-22 | Journal article
Contributors: Tomasz Kik; Jaromír Moravec; Martin Švec
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Heat Input Influence on the Fatigue Life of Welds from Steel S460MC

Metals
2020-09-25 | Journal article
Contributors: Jaromir Moravec; Jiri Sobotka; Pavel Solfronk; Robin Thakral
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Effect of the t8/5 Cooling Time on the Properties of S960MC Steel in the HAZ of Welded Joints Evaluated by Thermal Physical Simulation

Metals
2020-02-07 | Journal article
Contributors: Miloš Mičian; Daniel Harmaniak; František Nový; Jerzy Winczek; Jaromír Moravec; Libor Trško
Source: check_circle
Crossref

Material Utilization of Cotton Post-Harvest Line Residues in Polymeric Composites

Polymers
2019-06-29 | Journal article
Contributors: Miroslav Müller; Petr Valášek; Viktor Kolář; Vladimír Šleger; Gürkan Alp Kagan Gürdil; Monika Hromasová; Sergej Hloch; Jaromír Moravec; Martin Pexa
Source: check_circle
Crossref

Determination of Grain Growth Kinetics and Assessment of Welding Effect on Properties of S700MC Steel in the HAZ of Welded Joints

Metals
2019-06-24 | Journal article
Contributors: Jaromir Moravec; Iva Novakova; Jiri Sobotka; Heinz Neumann
Source: check_circle
Crossref
grade
Preferred source (of 2)‎

Application of Numerical Simulations on 10GN2MFA Steel Multilayer Welding

Springer Proceedings in Mathematics and Statistics
2018 | Conference paper
EID:

2-s2.0-85053835958

Contributors: Kik, T.; Moravec, J.; Nováková, I.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Application possibilities of low-temperature repairs by welding for creep-resistance material GX12CrMoVNb9-1

Manufacturing Technology
2018 | Journal article
EID:

2-s2.0-85059333455

Contributors: Moravec, J.; Novakova, I.; Sobotka, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Application possibilities of the low-temperature repairs on creep-resistance turbine components from material GX23CrMoV12-1

MATEC Web of Conferences
2018 | Conference paper
EID:

2-s2.0-85059135875

Contributors: Moravec, J.; Novakova, I.; Sobotka, J.; Kik, T.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Possibilities of using interlayers during diffusion welding of Ti Gr2 and AISI 316L

MATEC Web of Conferences
2018 | Conference paper
EID:

2-s2.0-85059116374

Contributors: Moravec, J.; Novakova, I.; Kik, T.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Application possibilities of the diffusion bonding for material 10gn2mfa used in the nuclear power industry

MM Science Journal
2017 | Journal article
EID:

2-s2.0-85034635718

Contributors: Moravec, J.; Novakova, I.; Sahul, M.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Metallurgy of the aluminium alloys for high-pressure die casting

Manufacturing Technology
2017 | Journal article
EID:

2-s2.0-85030565570

Contributors: Novakova, I.; Moravec, J.; Kejzlar, P.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

New method of processing heat treatment experiments with numerical simulation support

IOP Conference Series: Materials Science and Engineering
2017 | Conference paper
EID:

2-s2.0-85028016711

Contributors: Kik, T.; Moravec, J.; Novakova, I.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Selection of the proper diffusion welding parameters for the heterogeneous joint Ti grade 2/AISI 316L

Manufacturing Technology
2017 | Journal article
EID:

2-s2.0-85016766635

Contributors: Moravec, J.; Dikovits, M.; Beal, C.; Novakova, I.; Chandezon, R.; Sobotka, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

The impact of selected processes and technological parameters on the geometry of the weld pool when welding in shield gas atmosphere

Acta Polytechnica
2017 | Journal article
EID:

2-s2.0-85019019433

Contributors: Bradáč, J.; Moravec, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

The increase in effectivity of material processing with employment of liquid CO<inf>2</inf>during aluminium die casting

Key Engineering Materials
2017 | Book
EID:

2-s2.0-85027063862

Contributors: Nováková, I.; Seidl, M.; Moravec, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

The selection of appropriate process parameters of diffusion bonding in heterogeneous weld of 355J2/AISI 316L steels

Key Engineering Materials
2017 | Book
EID:

2-s2.0-85027043426

Contributors: Moravec, J.; Novakova, I.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Application of numerical simulations on X10CrWMoVNb9-2 steel multilayer welding

MM Science Journal
2016 | Journal article
EID:

2-s2.0-84995549533

Contributors: Moravec, J.; Kik, T.; Novakova, I.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Comparison of dilatometry results obtained by two different devices when generating CCT and in-situ diagrams

Key Engineering Materials
2016 | Book
EID:

2-s2.0-84944769286

Contributors: Moravec, J.; Dikovits, M.; Novakova, I.; Caliskanoglu, O.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Cooling thin parts of pressure casting moulds by means of liquid CO<inf>2</inf>

Key Engineering Materials
2016 | Book
EID:

2-s2.0-84944790071

Contributors: Nováková, I.; Seidl, M.; Brdlík, P.; Štverák, J.; Moravec, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Effect of age hardening conditions on mechanical properties of AW 6082 alloy Welds

Manufacturing Technology
2016 | Journal article
EID:

2-s2.0-84976500994

Contributors: Moravec, J.; Nováková, I.; Bradáč, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Improvement of model of aluminium alloys behaviour for application in numerical simulations of welding

MM Science Journal
2016 | Journal article
EID:

2-s2.0-84995673135

Contributors: Vanek, M.; Moravec, J.; Rihacek, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Influence of the pressure tanks repeated enameling on the basic material degradation

MM Science Journal
2016 | Journal article
EID:

2-s2.0-84987597754

Contributors: Novakova, I.; Moravec, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Determination of the grain growth kinetics as a base parameter for numerical simulation demand

MM Science Journal
2015 | Journal article
EID:

2-s2.0-84941212301

Contributors: Moravec, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Hardness of the high pressure die castings from alloy AlSi9Cu3 in dependence on the subsequent processing technology

Manufacturing Technology
2015 | Journal article
EID:

2-s2.0-84949203648

Contributors: Novakova, I.; Štverák, J.; Moravec, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Influence of pressure in the nozzle combustion chamber on the porosity and hardness of wc - co coatings created by hvof technology

Materials Science Forum
2015 | Book
EID:

2-s2.0-84954206675

Contributors: Moravec, J.; Kaška, V.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

The impact of thermal cycles of superheated steam on pipes material of by-pass station of steam and gas-steam turbines

METAL 2015 - 24th International Conference on Metallurgy and Materials, Conference Proceedings
2015 | Conference paper
EID:

2-s2.0-85020129947

Contributors: Moravec, J.; Bradáč, J.; Beran, D.; Nováková, I.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Utilization of hs cameras for analysis deformation limit states of steel sheets

METAL 2015 - 24th International Conference on Metallurgy and Materials, Conference Proceedings
2015 | Conference paper
EID:

2-s2.0-85020057967

Contributors: Solfronk, P.; Moravec, J.; Sobotka, J.; Kolnerová, M.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Application of cooling by liquid CO<sup>2</sup> for the die casting moulds cores

Manufacturing Technology
2014 | Journal article
EID:

2-s2.0-84926453061

Contributors: Novakova, I.; Seidl, M.; Brdlik, P.; Nova, I.; Moravec, J.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Application of numerical simulations at welding multilayer welds from the material X22CrMoV12-2

Advanced Materials Research
2014 | Book
EID:

2-s2.0-84937193038

Contributors: Moravec, J.; Slováček, M.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

New methods of obtaining input data of numerical computations by using heat treatment simulator

Applied Mechanics and Materials
2014 | Book
EID:

2-s2.0-84907356523

Contributors: Moravec, J.; Dobránsky, J.; Bradáč, J.; Nováková, I.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Ways of numerical prediction of austenitic grain size in heat-affected zone of welds

Advanced Materials Research
2014 | Book
EID:

2-s2.0-84937193718

Contributors: Moravec, J.; Bradáč, J.; Nováková, I.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier

Grain size prediction of steel P92 by help of numerical simulations

METAL 2013 - 22nd International Conference on Metallurgy and Materials, Conference Proceedings
2013 | Conference paper
EID:

2-s2.0-84923260365

Contributors: Moravec, J.; Bradác, J.; Neumann, H.; Nováková, I.
Source: Self-asserted source
Jaromír Moravec via Scopus - Elsevier